User Manual

2.3.4 Phantom 2 Vision+ Mode

Scenario 9 – Phantom 2 Vision+ with DJI Lightbridge

To use Phantom 2 Vision+ with DJI Lightbridge, visit DJI WIKI page on DJI official website

(http://wiki.dji.com/en/index.php/Using_a_DJI_Phantom_2_Vision%2B_with_the_DJI_Lightbridge) for details.

2.3.5 DIY Mode

Only HDMI and AV port is available for video transmission under DIY mode.

Scenario 10 – DIY mode

DIY users should select either HDMI or AV based on camera video output and follow the below connection

procedures:

1. On AV cameras, connect AV port to AV output with AV cable. On HDMI cameras, connect HDMI IN

port to the HDMI out with HDMI cable.

2. Connect Gimbal Port to onboard battery and CAN-bus port on DJI flight control system (CAN1 port

for DJI A2 users) via the supplied air system power and CAN cable.

3. Connect DBUS to DBUS port (X2 ports) on flight control system with DBUS cable.

4. Refer to flight control system manuals to complete connection.

The below example is based on DJI A2.

(3S ~ 6S)

HDMI

Devices on

CAN1 Bus

HDMI