INSPIRE 2 User Manual 2017.07 V1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this manual 2 Legends 2 Before Flight 2 Watch the video tutorials 2 Download the DJI GO 4 app 2 Download the DJI Assistant 2 2 Product Profile 5 Introduction 6 Feature Highlights 6 Assemble the Aircraft 6 Preparing Remote Controller 8 Aircraft Diagram 9 Remote Controller Diagram 10 Aircraft 12 Flight Controller 13 Flight Mode 13 Flight Status Indicator 14 Return-to-Home (RTH) 15 TapFly 19 ActiveTrack 21 Tripod Mode 23 Spotlight Pro 23 Vision System
INSPIRE 2 User Manual Gimbal and Camera Camera 46 Gimbal 47 Using CINESSD 49 DJI GO 4 App 51 Camera 52 Editor 55 SkyPixel 55 Me 55 Flight 56 Flight Environment Requirements 57 Flight Limits and No-Fly Zones 57 Preflight Checklist 60 Calibrating the Compass 60 Auto Take-off and Auto Landing 61 Starting/Stopping the Motors 62 Stop the Motor Mid-flight 63 Flight Test 63 Appendix 4 45 64 Specifications 65 Aircraft Status Indicator Description 68 Upgrading the Firmware
Product Profile This chapter describes the features of Inspire 2, instructs you to assemble the aircraft and explains the components on the aircraft and remote controllers. © 2017 DJI All Rights Reserved.
Product Profile Introduction The Inspire 2 is a powerful aerial film making system with class leading agility and speed, redundancy features for maximum reliability, and new, smart features that make capturing complex shots easy. The camera unit is now independent from image processor so that you have the flexibility to choose the perfect gimbal and camera system for each of your scenes. Dual frequency support in the remote controller makes the HD video downlink more efficient and more stable.
INSPIRE 2 User Manual 5x Insert the battery pair Press the power button a minimum of five times Mounting the Zenmuse X5S to the aircraft (Powering off not required) Unfold the landing gear to Landing Mode and power on Battery must be fully charged before using it for the first time. Refer to "Charging the Intelligent Flight Battery" for more information . The aircraft cannot change to Landing Mode from Travel Mode with the gimbal camera attached.
INSPIRE 2 User Manual Attaching 1550T Quick Release Propellers Following the steps below to attach the 1550T quick release propellers. 1. Pair the propellers and motors with arrows of the same color (red or white). 1 Press down the spring pad and rotate the propeller lock until the arrows are aligned and you hear a click. 3 2 Attach the propeller onto the motor. Again, rotate the propeller lock until you hear a click. Make sure to press down the spring pad before rotating the propeller lock.
INSPIRE 2 User Manual Aircraft Diagram 10 9 11 8 1 7 12 2 6 19 5 13 20 21 4 14 15 16 3 17 18 [1] FPV Camera [11] Rear LEDs [2] Forward Vision System [12] Intelligent Flight Batteries [3] DJI Gimbal Connector V2.0 (DGC2.
INSPIRE 2 User Manual Remote Controller Diagram [1] Power Button Used to turn the Remote Controller on and off. [2] Transformation Switch 8 Toggle the switch up or down to raise or lower the landing gear during flight. 9 [3] Return-to-Home (RTH) Button Press and hold the button to initiate Return to Home (RTH). [4] Control Sticks Controls the orientation and movement of the aircraft. 4 1 [5] Status LED Displays the Remote Controller's system status.
INSPIRE 2 User Manual [15] Shutter Button Press the Shutter Button to take a photo. Photos can also be captured during video recording. [16] Pause Button Press once to allow the aircraft to exit from TapFly, ActiveTrack and Advanced mode. [17] Micro USB Port Use this port to upgrade the firmware. [18] CAN Bus Reserved extended port. [19] HDMI A Port HDMI A Port is for video output. [20] USB Port Connection to mobile device for DJI GO 4 app. [21] C1 Button Customizable through the DJI GO 4 app.
Aircraft This chapter describes the features of the Flight Controller, Vision System and the Intelligent Flight Battery.
Aircraft Flight Controller The Inspire 2 flight controller features several important upgrades. Safety modes include Failsafe and Return-to-Home. These features ensure the safe return of your aircraft if the control signal is lost. The flight controller can also save critical flight data from each flight to the on-board storage device. The new flight controller also provides increased stability and a new air braking feature. Flight Mode Three flight modes are available.
INSPIRE 2 User Manual Flight Status Indicator The Inspire 2 comes with the Front LED, Rear LED and Aircraft Status Indicator. The positions of these LEDs are shown in the figure below: Aircraft Status Indicator Front LED Rear LED The Front LEDs show the orientation of the aircraft. The Front LEDs glow solid red when the aircraft is turned on to indicate the front (or nose) of the aircraft (Front and rear LEDs can be turned off in the DJI GO 4 app).
INSPIRE 2 User Manual Return-to-Home (RTH) Return-to-Home (RTH) function brings the aircraft back to the last recorded Home Point. There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three scenarios in detail. Description GPS Home Point If a strong GPS signal was acquired before takeoff, the Home Point is the location from which the aircraft launched.
INSPIRE 2 User Manual Smart RTH Use the RTH button on the remote controller or tap the RTH button in the DJI GO 4 app and follow the on-screen instructions when GPS is available to initiate Smart RTH. The aircraft will then automatically return to the last recorded Home Point. Use the remote controller to control the aircraft’s speed or altitude to avoid a collision during the Smart RTH process.
INSPIRE 2 User Manual Critical Low battery level warning The aircraft must land immediately. Estimated remaining flight time Estimated remaining flight based on current battery level. Aircraft status indicator blinks RED quickly. The DJI GO 4 app display will flash red and the aircraft will start to descend. The remote controller will sound an alarm. Allow the aircraft to descend and land automatically.
INSPIRE 2 User Manual Obstacle Avoidance During RTH* Aircraft can now sense and actively attempt to avoid obstacles during RTH, provided that the lighting conditions are adequate for the Forward Vision System. Upon detecting an obstacle, the aircraft will act as follows: 1. The aircraft will use the primary camera to identify obstacles as far as 984 feet (300 meters) in front, allowing it to plan a safe route home. 2. The aircraft decelerates when an obstacle is sensed at 49 feet (15 meters) ahead. 3.
INSPIRE 2 User Manual TapFly Introduction With the TapFly feature, users can now tap on the mobile device screen to fly in the designated direction without using the remote controller. The aircraft will automatically avoid obstacles it sees or brake and hover provided that the lighting is appropriate (< 300 lux) nor too bright (> 10,000 lux). Using TapFly Ensure the battery level is more than 50% for the Intelligent Flight Battery. And the aircraft is in P-mode.
INSPIRE 2 User Manual DO NOT guide the aircraft to fly towards people, animals, small and fine objects (e.g. tree branches and power lines) or transparent objects (e.g. glass or water). Watch for the obstacles in the flight path and stay clear of them. There may be deviations between the expected and the actual flight path of TapFly selection. The selectable range for the target direction is limited. You cannot make a TapFly selection close to the upper or lower edge of the screen.
INSPIRE 2 User Manual OR OR Pause button Aircraft will stop and hover after exiting from TapFly. Tap a new target direction to continue flying or begin manual flight. ActiveTrack ActiveTrack allows you to mark and track a moving object on your mobile device screen. The aircraft will automatically avoid obstacles in its flight path. No external tracking device is required.
INSPIRE 2 User Manual In Flight (GPS) 74% 70% 12 P-GPS R 09:29 ISO 200 SHU T TER 1/200 F 5.6 EV WB Custom 0.3 5000K 4KP30 SD TIME 20:12 CA PACIT Y 4KP30 384G 4.07V 4.07V AF/ MF AE 智能跟随 D 30M H H.S 10.0 KM/H 10.0M VS 2.0M/S VPS 2.0M DO NOT select an area containing people, animals, small, fine objects (e.g. tree branches and power lines) or transparent objects (e.g. glass or water surface).
INSPIRE 2 User Manual You must follow local privacy laws and regulations when using ActiveTrack. Aircraft will not be able to avoid obstacles while in Profile or Spotlight Mode. Use these modes in open areas. Exiting ActiveTrack Use the following methods to exit ActiveTrack: 1. Tap the “ ” button on the screen. 2. Press the Intelligent Flight Pause button on the remote controller.
INSPIRE 2 User Manual You can drag on a subject in the DJI GO 4 app or move the gimbal control sticks to change the subject's position in the shot. Aircraft auto spin is enabled by default in Free Mode. It spins the aircraft in the opposite angle to gimbal rotation to avoid rotation limits during shooting. Spotlight Pro can be used in S-Mode, A-Mode, TapFly Mode and Tripod Mode.
INSPIRE 2 User Manual The aircraft cannot detect objects in shadow. Fly carefully. Ultrasonic sensor detection range is as follows. Calibration Forward and Downward Vision Systems cameras installed on the aircraft are calibrated on delivery. However these cameras are vulnerable to excessive impact and will require occasional calibration via DJI Assistant 2. Calibration via the Visual Calibration Plate 1. Ensure the aircraft is in landing mode.
INSPIRE 2 User Manual Calibrating via Screen Follow the steps below to calibrate the camera. 01 02 03 Point the aircraft toward the screen Align the boxes Pan and tilt the aircraft DO NOT power off or unplug the USB cable after calibration. Wait for data calculation. Using Vision System Vision System is activated automatically when the Inspire 2 is powered on. No manual action is required. Vision System is typically used in the indoor environment where no GPS is available.
INSPIRE 2 User Manual Assisted Braking from Obstacle Sensing Powered by the Obstacle Sensing, the aircraft will now be able to actively brake when obstacles are detected around the aircraft. Note that Obstacle Sensing function works best when lighting is adequate and the obstacle is clearly marked or textured. The aircraft must fly at no more than 31mph (50kph) to allow sufficient braking distance. The forward vision system will be disabled after the landing gear lowers. Stay alert.
INSPIRE 2 User Manual Flight Recorder Flight data is automatically recorded to the internal storage of the aircraft. This includes flight telemetry, aircraft status information, and other parameters. To access this data, connect the aircraft to the PC through the USB port and launch the DJI Assistant 2. Attaching and Detaching the Propellers Attaching the Propellers Refer to "Attaching Propellers" for details.
INSPIRE 2 User Manual 8. Short Circuit Protection: Automatically cuts the power supply when a short circuit is detected. 9. Battery Cell Damage Protection: The DJI GO 4 app displays a warning message when a damaged battery cell is detected. 10. Sleep Mode: Sleep mode is entered to save power when the aircraft is not flying. 11. Communication: Battery voltage, capacity, current, and other relevant information is provided to the aircraft’s to the main controller. 12.
INSPIRE 2 User Manual * It will take approximately 1.5 hours to fully charge the Inspire 2 Intelligent Flight Battery, and 3 hours for the remote controller. It will take a longer time to charge the Intelligent Flight Battery and remote controller together. Connecting Batteries Press the release button and open the corresponding charging port cover. Insert the Intelligent Flight Battery into the charging port to begin charging. The battery pair with more stored power will be charged first.
INSPIRE 2 User Manual Charging Protection LED Display The table below shows battery protection mechanisms and corresponding LED patterns.
INSPIRE 2 User Manual 2. Turn on the Charging Hub, then connect it to a computer using a Micro USB cable. 3. Run the firmware update program. Press the update button and wait for the process to finish. 4. The Charging Hub will automatically restart when the update has been successfully completed. 5. Repeat this process if the firmware update fails for any reason. Using the Battery Powering ON/OFF Powering On: Press the Power Button once, then press again and hold for 2 seconds to power on.
INSPIRE 2 User Manual Low Temperature Notice: 1. The performance of the intelligent Flight Battery is significantly reduced when flying in a low temperature environments (those with air temperatures below 5℃). Ensure that the battery is fully charged and the cell voltage is at 4.35 V before each flight. 2. If the DJI GO 4 app displays the “Critical Low Battery Level Warning” when flying in low temperature environments, stop flying and land the aircraft immediately.
Remote Controllers This chapter describes the features of the remote controller that includes aircraft and remote controller operations and dual remote controller mode.
Remote Controller Remote Controller Profile The Inspire 2 remote controller is a multi-function wireless communication device that integrates a dual frequency video downlink system and the aircraft remote control system. The 5.8 GHz video downlink is recommended for urban areas to resist interference, 2.4 GHz is good for long transmission distances in open areas. The remote controller features a number of camera control functions, including photo/ video capture as well as gimbal control.
INSPIRE 2 User Manual Charging Remote Controller Charge the remote controller via supplied charger. Power Outlet B B Controlling Camera Shoot videos or images and adjust camera settings via the Shutter Button, Camera Settings Dial Video Recording Button and Gimbal Dial on the remote control. [4] [3] [1] [2] [1] Camera Settings Dial Turn the dial to adjust camera settings such as ISO, shutter speed, and aperture without letting go of the remote controller.
INSPIRE 2 User Manual Remote Controller (Mode 2) ( Aircraft indicates nose direction) Remarks Moving the left stick up and down changes the aircraft’s elevation. Push the stick up to ascend and down to descend. Push the throttle stick up to takeoff. When both sticks are centered, the Inspire 2 will hover in place. The more the stick is pushed away from the center position, the faster the Inspire 2 will change elevation. Always push the stick gently to prevent sudden and unexpected elevation changes.
INSPIRE 2 User Manual Adjusting Controller Sticks Hold and twist the controller sticks clockwise or counter clockwise to adjust the length of the controller sticks. A proper length of controller sticks can improve the controlling accuracy. Flight Mode Switch Toggle the switch to select the desired flight mode. Choose between; P-mode, S-mode and A- mode.
INSPIRE 2 User Manual 1. Raise: Raise the landing gear to its upper most position. 2. Lower: The landing gear will lower to its lowest position for landing. Do not raise the landing gear when the aircraft is on the ground. Ensure the landing gear is lowered before landing. The aircraft will not be able to land if the landing gear does not lower. RTH button Press and hold this button to start the Return to Home (RTH) procedure. The aircraft will then return to the last recorded Home Point.
INSPIRE 2 User Manual Connecting Mobile Device Tilt the Mobile Device Holder to the desired position. Press the button on the side of the Mobile Device Holder to release the clamp, and then place your mobile device into the clamp. Adjust the clamp to secure your mobile device. Then connect your mobile device to the remote controller with a USB cable. Plug one end of the cable into your mobile device, and the other end into the USB port on the back of the remote controller.
INSPIRE 2 User Manual In Dual Controller Mode, when the Master remote controller is primary, it can control gimbal pitch and pan. When the Slave remote controller is primary, it can control gimbal pitch, pan and roll. Dual Remote Controller mode is not available in Russia and Israel. Setting Up Dual Remote Controllers Mode Dual Remote Controllers mode is disabled by default. Users must enable this feature on the “Master” remote controller by through the DJI GO 4 app.
INSPIRE 2 User Manual 2. Search the “Master” remote controller in the surrounding area. Remote Controller Settings Master and Slave Set Remote Controller Status Master ID: 28172d OFF Master Slave Slave ID: 14f93f Connection Status:OFF Search Master 3. Select the “Master” remote controller from the "Master" list and input the connection password to connect to the desired “Master” remote controller. Search Master Master RSSI Scan 2816f2 -56.00 Connect 28172d -22.
INSPIRE 2 User Manual Status LED Alarm Remote Controller Status — Solid Red —— The remote controller set as "Master" but it is not connected with the aircraft. — Solid Green —— The remote controller set as "Master" and it is connected with the aircraft. — Solid Purple —— The remote controller set as "Slave" but it is not connected with the aircraft. — Solid Blue —— The remote controller set as "Slave" and it is connected with the aircraft. D-D-D...... Remote controller error.
INSPIRE 2 User Manual 4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blue and "beep" sound is emitted. 5. Locate the Linking button on the aircraft, as shown in the figure shown below. Press the Linking button to start linking. The Remote Controller Status Indicator will display solid green if Link is succeed. Remote controller cannot link to the aircraft if the remote controller is set as “Slave”.
Gimbal and Camera This chapter provides the technical specifications of the camera and explains the working mode of the gimbal.
Camera and Gimbal Camera Camera Profile Featuring M4/3 CMOS sensor, the Zenmuse X5S supports up to 20.80 MP still photo capture. It is capable of capturing 5.2K 30fps CinemaDNG video and Apple ProRes Video as well as 4K 60fps using H.264. The Zenmuse X5S is built using the M4/3 interchangeable lens standard. A variety of shooting modes, including single shooting, burst shooting and interval shooting, provide more options of capture. Burst and AEB is available, with up to 14 stills.
INSPIRE 2 User Manual USB Port Power on the Inspire 2 and then connect a USB cable to the USB port to download photos or videos from the Inspire 2 to your computer. Power on the aircraft before attempting to download the files. Camera Operation Remote Controller Use the Shutter and Record button on the remote controller to shoot the images or the videos. For more information about how to use these buttons, refer to “Controlling Camera”.
INSPIRE 2 User Manual In Flight (GPS) 74% 70% 12 P-GPS R 09:29 ISO 200 SHU T TER 1/200 F 5.6 EV WB Custom 0.3 5000K D 30M SD TIME 4KP30 20:12 H H.S 10.0 KM/H CA PACIT Y 4KP30 384G 4.07V 4.07V AF/ MF AE 10.0M VS 2.0M/S VPS 2.0M Gimbal Operation Modes Three Gimbal operation modes are available. Switch between the different operation modes on the Camera page of the DJI GO 4 App. Note that your mobile device must be connected to the remote controller for changes to take effect.
INSPIRE 2 User Manual Using CINESSD Using an Inspire 2 as an example. Storing Files 1. Power off the aircraft. 2. Insert the CINESSD into the aircraft. If the CINESSD is not detected, check if it is inserted correctly. c *0.1 3. Power on the aircraft. 4. Information about the CINESSD will be available in the DJI GO™ 4 app. Exporting Files 1. Power off the aircraft. Remove the batteries and then the CINESSD. 2.
INSPIRE 2 User Manual 3. When connected, an icon named “DJI_A” followed by a number sequence will appear. Click to start the file export. 4. Safely remove the station before unplugging it from your computer. No additional software is required for exporting data from the CINESSD. You may also use the following DJI software based on your system. Windows: DJI Camera Exporter. Mac: DJI CINELIGHTTM. DO NOT remove the CINESSD when it is powered on. Insert the CINESSD before connecting the station to the computer.
DJI GO 4 App This chapter describes the four main GUI of the DJI GO 4 app.
DJI GO 4 App The DJI GO 4 app is a new mobile app designed specifically for the Inspire 2. Use this app to control the gimbal, camera and other features of your flight system. The app also comes with Map, Store a User Center, for configuring your aircraft and sharing your content with friends. It is recommended that you use a tablet for the best experience.
INSPIRE 2 User Manual 1. System Status : This icon indicates aircraft flight status and various warning messages. READY TO GO (GPS) 2. Battery Level Indicator : The battery level indicator provides a dynamic display of the battery level. The colored zones on the battery level indicator represent the power levels needed to carry out different functions. 3. Flight Mode : The text next to this icon indicates the current flight mode. Tap to configure the MC (Main Controller) Settings.
INSPIRE 2 User Manual 14. Photo/Video Button : Tap to switch between photo and video recording modes. 15. Gimbal Slider : Displays the pitch of the gimbal. 16. Shoot / Record Button / : Tap to start shooting photos or recording video. 17. Camera Settings : Tap to set ISO, shutter and auto exposure values of the camera. 18. Playback : Tap to enter the playback page and preview photos and videos as soon as they are captured. 19. Manual Focus Only effective in MF mode. 20.
INSPIRE 2 User Manual A blue line indicates the current position of the gimbal’s tilt motor. The outermost grey circle displays the current power capacity. (3) Flight Parameters: Altitude: Vertical distance from the Home Point. Distance: Horizontal distance from the Home Point. Vertical Speed: Movement speed across a vertical distance. Horizontal Speed: Movement speed across a horizontal distance. (4) Aircraft Distance: The horizontal distance between the aircraft and the operator. 22.
Flight This chapter describes the flight safety and flight restrictions.
Flight Once pre-flight preparation is complete, it is recommended that you use the flight simulator in the DJI GO 4 app to hone your flight skills and practice flying safely. Ensure that all flights are carried out in an open area. Flight Environment Requirements 1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10 m/s , snow, rain and fog. 2. Only fly in open areas.
INSPIRE 2 User Manual GPS Signal Strong Blinking Green Flight Limits DJI GO 4 App Aircraft Status Indicator Maximum Flight Altitude Aircraft's altitude cannot exceed the specified value. Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached. Rapid red flashing when close to the max radius limit.
INSPIRE 2 User Manual 1640 feet Airports 66 feet 1 mile R1 R2 320 feet 1640 feet 66 feet 1 mile 320 feet R1 R2 Restricted Areas: (1) Restricted Areas does not have flight altitude restrictions. (2) R miles around the designated restriction area is a Take-off Restricted area. Aircraft cannot take off within this zone. The value of R varies based on the definition of the restricted areas. (3) A “warning zone” has been set around the Restricted Area. When the aircraft approaches within 0.
INSPIRE 2 User Manual Preflight Checklist 1. 2. 3. 4. 5. 6. 7. Remote controller, Intelligent Flight Battery, and mobile device are fully charged. Propellers are mounted correctly and firmly. Micro SD card has been inserted, if necessary. Gimbal is functioning normally. Motors can start and are functioning normally. The DJI GO 4 app is successfully connected to the aircraft. Ensure that the sensors for the Obstacle Sensing System are clean.
INSPIRE 2 User Manual 3. Hold the aircraft vertically, with nose pointing downward, and rotate it 360 degrees around the center axis. Recalibrate the compass if the Aircraft Status Indicator glows blinking red. If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your aircraft to a different location and try again. DO NOT calibrate the compass near metal objects such as a metal bridge, cars, scaffolding.
INSPIRE 2 User Manual 2. Abort landing process immediately by using the button on the screen. 3. a. When Landing Protection determines that the ground is suitable for landing, the Inspire 2 will land gently. b. If Landing Protection determines that the ground is not suitable for landing, the Inspire 2 will hover and wait for pilot confirmation. c. If Landing Protection is not operational, the DJI GO 4 app will display a landing prompt when the Inspire 2 descends below 0.7 meters.
INSPIRE 2 User Manual Stop the Motor Mid-flight Pull the left stick to the bottom inside corners and press the RTH button at the same time. Only stop the motors mid-flight in emergency situations when doing so can reduce the risk of damage or injury. Please check that CSC is activated inside DJI GO 4 app, then the user can stop the aircraft mid-air. Flight Test Takeoff/Landing Procedures 1. 2. 3. 4. 5. 6. 7. 8. 9.
Appendix
Appendix Specifications Aircraft Model T650 Weight 7.58 lbs (3440 g, including two batteries, without gimbal and camera) Max Takeoff Weight 4000 g GPS Hovering Accuracy Vertical: ±1.64 feet (0.5 m) or ±0.33 feet (0.1 m, Downward Vision System enabled) Horizontal: ±4.92 feet (1.5 m) or ±0.98 feet (0.
INSPIRE 2 User Manual FOV Photo Resolutions 72° (with DJI MFT 15mm/1.7 ASPH ) 4:3, 5280×3956 16:9, 5280×2970 H.264 C4K: 4096×2160 23.976/24/25/29.97/47.95/50/59.94p @100Mbps 4K: 3840×2160 23.976/24/25/29.97/47.95/50/59.94p @100Mbps 3840×1572 23.976/24/25/29.97p @100Mbps 2.7K: 2720×1530 23.976/24/25/29.97p @80Mbps 47.95/50/59.94p @100Mbps FHD: 1920×1080 23.976/24/25/29.97p @60Mbps 47.95/50/59.94p @80Mbps 119.88p @100Mbps H.265 C4K: 4096×2160 23.976/24/25/29.
INSPIRE 2 User Manual Anti-Flicker Auto, 50Hz, 60Hz PAL/NTSC Supported Environmental Operating Temperature 14° to 104°F (-10 to 40℃) Storage Temperature -4° to 140° F (-20 to 60 ℃) Gimbal Angular Vibration Range ±0.01° Controllable Range Pitch: -130° to +40°; Roll: ±20°; Pan: ±320° Max Controllable Speed Pitch: 180°/s; Roll:180°/s; Pan:270°/s Interface Type DGC2.0 Mechanical Range Pitch: -140° to +50°; Roll: -50° to +90°; Pan: ±330° Remote Controller Model GL6D10A Operating Frequency 2.
INSPIRE 2 User Manual Voltage 22.8 V Battery Type 6S LiPo Energy 97.58 Wh Net Weight 515 g Operating Temperature -4° to 104° F (-20° to 40° C) Storage Temperature Less than 3 months: -4° to 113° F (-20° to 45° C) More than 3 months: 72° to 82° F (22° to 28° C) Charging Temperature 41° to 104° F (5° to 40° C) Max Charging Power 180 W Charging Hub (Model: IN2CH) Input Voltage 26.1 V Input Current 6.9 A Downward Vision System Velocity Range <32.8 ft/s (10 m/s) at height of 6.
INSPIRE 2 User Manual Warning Fast Yellow Flashing Slow Red Flashing Fast Red Flashing Red Flashing Alternatively — Solid Red Remote Controller Signal Lost Low Battery Warning Critical Low Battery Warning IMU Error Critical Error Red and Yellow Flash Alternatively Compass Calibration Required Upgrading the Firmware Use DJI Assistant 2 or the DJI GO 4 app to upgrade aircraft and Remote Controller. Upgrading the Aircraft Firmware Method 1: Using the DJI Assistant 2 1. 2. 3. 4. 5. 6. 7.
INSPIRE 2 User Manual Upgrading the Remote Controller Firmware Method 1: Using the DJI GO 4 App Power on the remote controller and connect it with the DJI GO 4 app. A prompt will appear if a new firmware upgrade is available. To start upgrading, connect a mobile device to the Internet and follow the on-screen instructions. The firmware update will take around 15 minutes. It is normal that the gimbal will go limp, the aircraft status indicator blinks abnormally and the aircraft reboots.
This content is subject to change. Download the latest version from www.dji.com/inspire-2 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2016 DJI All Rights Reserved.
