Matrice 30 Series - User Manual
Table Of Contents
- Using This Manual
- Product Profile
- Flight Safety
- Aircraft
- Remote Controller
- Starting and Activating the Remote Controller
- Remote Controller Overview
- Mounting the WB37 Intelligent Battery
- Mounting the Dongle
- Mounting the Strap and Bracket Kit
- Adjusting the Antennas
- IP Rating
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Advanced Dual Operator Mode
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Pilot 2 App
- Firmware Update
- Appendix
82
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
Charge the battery fully or to the proper power level for storage after completing battery maintenance.
Contact DJI Support if a maintenance failure persists.
In addition to the above, we recommend conducting the following checks for battery maintenance:
a. Insert the battery into the aircraft and power it on to view the battery information in DJI Pilot 2.
Make sure the dierence in cell voltage is less than 0.1 V and the battery rmware is updated to
the latest version.
b. Make sure the battery is not swollen, leaky, or damaged.
c. Make sure the battery terminals are clean.