Matrice 30 Series - User Manual
Table Of Contents
- Using This Manual
- Product Profile
- Flight Safety
- Aircraft
- Remote Controller
- Starting and Activating the Remote Controller
- Remote Controller Overview
- Mounting the WB37 Intelligent Battery
- Mounting the Dongle
- Mounting the Strap and Bracket Kit
- Adjusting the Antennas
- IP Rating
- User Interface
- Video Transmission
- Remote Controller LEDs and Alert
- Charging the Remote Controller and Checking the Battery Level
- Linking the Remote Controller and Control Stick Modes
- Buttons Overview
- Flight Mode Switch (N/S/F)
- Calibrating the Compass
- HDMI Settings
- Advanced Dual Operator Mode
- Intelligent Battery Station
- Intelligent Flight Battery
- DJI Pilot 2 App
- Firmware Update
- Appendix
87
©
2022 DJI All Rights Reserved.
MATRICE 30 SERIES User Manual
Care, its validity period will also be shown. Tap to view the device information, including
cycle count, ight duration, ight history, activation time, and ight mileage.
9. Firmware Update Shortcut
If an update is necessary, a prompt will appear notifying the user that new rmware is available or a
consistent rmware update is needed for the aircraft and remote controller.
Inconsistent firmware versions will affect flight safety, therefore the app will prioritize consistent
rmware updates. Tap the prompt to enter the rmware update page.
A consistent rmware update is required when the rmware versions of some modules of
the aircraft are inconsistent with the compatible version of the system. In a typical consistent
rmware update situation, the aircraft and remote controller will be updated to the latest
version except for extra batteries. When these batteries are used, a prompt will appear
requiring a consistent rmware update to ensure ight safety.
10. Camera View
Tap to enter Preight Check view and FPV camera view and switch to gimbal camera view. Refer to
the Preight Check View, FPV Camera View and Gimbal Camera View sections for more details.