/ User Manual 1 © 2022 DJI All Rights Reserved. v1.0 2022.
This document is copyrighted by DJI with all rights reserved. Unless otherwise authorized by DJI, you are not eligible to use or allow others to use the document or any part of the document by reproducing, transferring or selling the document. Users should only refer to this document and the content thereof as instructions to operate DJI UAV. The document should not be used for other purposes. Searching for Keywords Search for keywords such as “battery” and “install” to find a topic.
Using this Manual Legend Warning Important Hints and Tips Reference Read Before the First Flight DJITM provides users with tutorial videos and the following documents. 1. 2. 3. 4. In the Box Safety Guidelines Quick Start Guide User Manual It is recommended to watch all tutorial videos and read the safety guidelines before using for the first time. Prepare for your first flight by reviewing the quick start guide and refer to this user manual for more information.
Contents Using this Manual 3 Read Before the First Flight 3 Video Tutorials 3 Download DJI Assistant 2 3 Product Profile 6 Introduction 6 Feature Highlights 6 Using for the First Time 7 Overview 10 Activation 12 Flight Safety 13 Flight Environment Requirements 13 Wireless Communication Requirements 13 Vision Systems and Infrared Sensing System 14 Return to Home 16 Flight Restrictions 23 DJI AirSense 27 Advanced Pilot Assistance Systems (APAS 5.
Remote Controller System Interface 47 Remote Controller LEDs and Alerts 50 Operation 51 Optimal Transmission Zone 55 Linking the Remote Controller 55 Advanced Features 56 DJI Pilot 2 App 57 Homepage 57 Preflight Check 60 Camera View 61 Map View 69 Annotation Management and Synchronization 70 Flight Tasks 74 Health Management System (HMS) 77 DJI FlightHub 2 78 Appendix 5 79 Specifications 79 Firmware Update 86 © 2022 DJI All Rights Reserved.
Product Profile Introduction DJI Mavic 3E/3T features both an infrared sensing system and upward, downward, and horizontal omnidirectional vision systems, allowing for hovering and flying indoors as well as outdoors and for automatic Return to Home while avoiding obstacles in all directions. The aircraft has a maximum flight speed of 47 mph (75.6 kph) and a maximum flight time of 45 minutes.
DJI Mavic 3E/3T User Manual AR Projection: DJI Pilot 2 supports the projection of Home Point, PinPoint, and Waypoint locations in the camera view, providing users with clear flight targets and better situational awareness. Cloud-based Mapping: when the remote controller is logged in to DJI FlightHub 2, the aircraft can perform a cloud mapping task, which enables viewing of and generating a map on DJI FlightHub 2 simultaneously.
DJI Mavic 3E/3T User Manual 2. Unfold the front arms before unfolding the rear arms. 3. Remove the gimbal protector from the camera. 1 2 4. Attaching the propellers. Propellers with and without marks indicate different directions of rotation. Attach the propellers with marks to the motors with marks and the unmarked propellers to the motors without marks. Hold the motor, press the propeller down, and rotate in the direction marked on the propeller until it pops up and locks in place.
DJI Mavic 3E/3T User Manual • Make sure to unfold the front arms before unfolding the rear arms. • Make sure the gimbal protector is removed and all arms are unfolded before powering on the aircraft. Otherwise, it may affect the aircraft self-diagnostics. • Attach the gimbal protector when the aircraft is not in use. Adjust the camera to the horizontal position, then cover the vision system with the gimbal protector. Note, align the positioning holes, and then press the buckle to complete the installation.
DJI Mavic 3E/3T User Manual Overview Aircraft 2 7 1 2 3 5 4 10 8 6 9 Mavic 3T 19 18 11 12 1 13 17 14 Mavic 3E 16 1. Gimbal and Camera 11. Upward Vision System 2. Horizontal Omnidirectional Vision System 12. USB-C Port 3. Auxiliary Bottom Light 14. Battery Level LEDs 4. Downward Vision System 15. Intelligent Flight Battery 5. Infrared Sensing System 16. Power Button 6. Front LEDs 17. Battery Buckles 7. Motors 18. Beacon 8. Propellers 19. PSDK Port 9.
DJI Mavic 3E/3T User Manual Remote Controller 2 1 3 4 7 5 8 6 17 15 21 16 20 9 18 19 17 11 12 13 10 14 1. Control Sticks Use the control sticks to control the aircraft movements. Set the flight control mode in DJI Pilot 2. The control sticks are removable and easy to store. 2. Back/Function Button Press once to return to the previous screen. Press twice to return to the homepage. Use the back button and another button to activate22 button combinations.
4 5 6 DJI Mavic 3E/3T User Manual 16. Record Button 9 15 21 16 20 18 19 11 12 Press once to start13 or stop recording. 10 17. Antennas 14 Transmit control and video wireless signals between the remote controller and the aircraft. It includes external and built-in antennas. Do not block the antennas to avoid affecting the transmission performance. 18. Status LED 19. Battery Level LEDs 17 Display the current battery level of the remote controller. 20.
Flight Safety Make sure to have training and practice before operating any actual flight. Practice with the simulator in DJI Assistant 2 or fly under the guidance of experienced professionals. Pick a suitable area to fly in according to the following flight requirements and restrictions. Fly the aircraft below 120 m (400 ft). Any flight altitude higher than that may violate local laws and regulations. Make sure you understand and comply with the local laws and regulations before flying.
DJI Mavic 3E/3T User Manual scale power transmission stations or mobile base stations, and broadcasting towers. The aircraft may behave abnormally or lose control when flying in areas with too much interference. Return to the Home Point and land the aircraft if prompted to do so in DJI Pilot 2. Vision Systems and Infrared Sensing System DJI Mavic 3E/3T is equipped with both an Infrared Sensing System and Horizontal Omnidirectional (Forward, Backward, Lateral), Upward, and Downward Vision Systems.
DJI Mavic 3E/3T User Manual 0.5-20 m 90° 0.2-10 m 90° 90° 90° 100° 0.5-25 m 0.5-25 m 90° 90° 103° 103° 90° 85° 85° 90° 90° 90° 0.5-16 m 130° 130° 160° 0.5-30 m Using the Vision System The positioning function of the Downward Vision System is applicable when GNSS signals are unavailable or weak. It is automatically enabled in Normal mode.
DJI Mavic 3E/3T User Manual d. Flying over moving surfaces or objects. e. Flying in an area with frequent and drastic lighting changes. f. Flying over extremely dark (< 10 lux) or bright (> 40,000 lux) surfaces. g. Flying over surfaces that strongly reflect or absorb infrared waves (e.g., mirrors). h. Flying over surfaces without clear patterns or texture. i. Flying over surfaces with repeating identical patterns or textures (e.g., tiles with the same design). j.
DJI Mavic 3E/3T User Manual Smart RTH Press and hold the RTH button on the remote controller to initiate Smart RTH. Press the RTH button or flight pause button to exit Smart RTH and regain full control of the aircraft. Advanced RTH Advanced RTH is enabled if the lighting is sufficient and the environment is suitable for vision systems when Smart RTH is triggered. The aircraft will automatically plan the best RTH path, which will be displayed in DJI Pilot 2 and will adjust according to the environment.
DJI Mavic 3E/3T User Manual Straight Line RTH The aircraft will enter Straight Line RTH when the lighting is not sufficient and the environment is not suitable for the Advanced RTH. Straight Line RTH Procedure: 1. The Home Point is recorded. 2. Straight Line RTH is triggered. 3. The aircraft brakes and hovers in place. a.
DJI Mavic 3E/3T User Manual • If there is a large difference in the current altitude and the RTH altitude, the amount of battery power used cannot be calculated accurately due to wind speeds at different altitudes. Pay extra attention to the battery power and warning prompts in DJI Pilot 2. • Advanced RTH will not be available if the lighting condition and environment are not suitable for vision systems during takeoff or RTH.
DJI Mavic 3E/3T User Manual During auto landing, move the aircraft horizontally to find an appropriate place to land as soon as possible. The aircraft will fall if the user keeps pushing the throttle stick upward until the power is depleted.
DJI Mavic 3E/3T User Manual Failsafe RTH The action of the aircraft when the remote controller signal is lost can be set to RTH, land, or hover in DJI Pilot 2. If the Home Point was successfully recorded and the compass is functioning normally, Failsafe RTH automatically activates after the remote controller signal is lost for more than six seconds.
DJI Mavic 3E/3T User Manual Landing Protection Landing Protection will activate during Smart RTH. Landing Protection is enabled once the aircraft begins to land. 1. During Landing Protection, the aircraft will automatically detect and carefully land on suitable ground. 2. If the ground is determined unsuitable for landing, the aircraft will hover and wait for pilot confirmation. 3. If Landing Protection is not operational, DJI Pilot 2 will display a landing prompt when the aircraft descends to 0.
DJI Mavic 3E/3T User Manual Flight Restrictions GEO (Geospatial Environment Online) System DJI’s Geospatial Environment Online (GEO) system is a global information system that provides real-time information on flight safety and restriction updates and prevents UAVs from flying in restricted airspace. Under exceptional circumstances, restricted areas can be unlocked to allow flight. Prior to that, the user must submit an unlocking request based on the current restriction level in the intended flight area.
DJI Mavic 3E/3T User Manual Authorization Zones (Blue) The aircraft will not be able to take off in an Authorization Zone unless it obtains a permission to fly in the area. Takeoff: the aircraft motors cannot be started in Authorization Zones. To fly in an Authorization Zone, the user is required to submit an unlocking request registered with a DJI-verified phone number. In Flight: when the aircraft flies inside an Authorization Zone, a100-second countdown will commence in DJI Pilot 2.
DJI Mavic 3E/3T User Manual in the illustration below, the aircraft can only take off and land away from the Restricted or Authorization Zone when inside the buffer zone. The aircraft cannot fly toward the Restricted or Authorization Zone unless an unlocking request has been approved. The aircraft cannot fly back into the buffer zone after leaving the buffer zone. Buffer Zones for Altitude Zones: a buffer zone of about 20 meters wide is established outside each Altitude Zone.
DJI Mavic 3E/3T User Manual Custom Unlocking is tailored for users with special requirements. It designates user-defined custom flight areas and provides flight permission documents specific to the needs of different users. This unlocking option is available in all countries and regions and can be requested via the DJI Fly Safe website at https://www.dji.com/flysafe. Unlocking on Mobile Device: run the DJI Pilot 2 app and tap GEO Zone Map on the home screen.
DJI Mavic 3E/3T User Manual Weak GNSS Signal Flight Restrictions Prompt in DJI Pilot 2 Max Altitude When the GNSS signal is weak, namely, when the GNSS icon is yellow or red, and the ambient light is too dark, the max altitude is 3 m (9.84 ft). The Aircraft approaching max max altitude is the relative altitude flight altitude. Fly with caution. measured by the infrared sensor. When the GNSS signal is weak, but the ambient light is sufficient, the max altitude is 30 m (98.43 ft). Max Distance No limit.
DJI Mavic 3E/3T User Manual 2. If there is an obstacle between a manned airplane and a DJI aircraft, DJI AirSense will not be able to receive ADS-B messages from the airplane or send warnings to the user. Keenly observe your surroundings and fly with caution. 3. Warning prompts may be delayed if DJI AirSense experiences any interference from the surrounding environment. Keenly observe your surroundings and fly with caution. 4.
DJI Mavic 3E/3T User Manual Landing Protection Landing Protection will activate if Obstacle Avoidance is set to Avoid or Brake and the user pulls the throttle stick down to land the aircraft. Landing Protection is enabled once the aircraft begins to land. 1. During Landing Protection, the aircraft will automatically detect and carefully land on suitable ground. 2. If the ground is determined unsuitable for landing, the aircraft will hover when the aircraft descends to 0.8 m above ground.
DJI Mavic 3E/3T User Manual obstacles, buildings, or trees nearby and that the aircraft is 5 m away from the pilot. The pilot should be facing the rear of the aircraft. 10. To ensure flight safety, enter the camera view of DJI Pilot 2 and check the parameters on the pre-flight checklist, such as the failsafe settings, control stick mode, RTH height, and obstacle distance. It is recommended to set the out-of-control action to RTH. 11.
DJI Mavic 3E/3T User Manual Stopping the Motors Mid-Flight Stopping motors mid-flight will cause the aircraft to crash. The motors should only be stopped mid-flight in an emergency situation, such as if the aircraft is involved in a collision, a motor has stalled, the aircraft is rolling in the air, or the aircraft is out of control and is ascending or descending very quickly. To stop the motors mid-flight, perform the same CSC that was used to start the motors.
Aircraft DJI Mavic 3E/3T contains a flight controller, video downlink system, vision systems, infrared sensing system, propulsion system, and an Intelligent Flight Battery. Flight Modes DJI Mavic 3E/3T supports the following flight modes: Normal Mode: The aircraft utilizes GNSS, the Horizontal Omnidirectional, Upward, and Downward Vision Systems, and the Infrared Sensing System to locate itself and stabilize. When the GNSS signal is strong, the aircraft uses GNSS to locate itself and stabilize.
DJI Mavic 3E/3T User Manual Aircraft Status Indicator DJI Mavic 3E/3T has front LEDs and aircraft status indicators. Front LED Front LED Aircraft Status Indicator Aircraft Status Indicator When the aircraft is powered on, but the motors are not running, the front LEDs glow solid red to display the orientation of the aircraft. When the aircraft is powered on, but the motors are not running, the aircraft status indicators will display the current status of the flight control system.
DJI Mavic 3E/3T User Manual To obtain better footage, the front LEDs turn off automatically when shooting if the front LEDs are set to auto in DJI Pilot 2. Lighting requirements vary depending on the region. Observe local laws and regulations. Beacon and Auxiliary Light Beacon The beacon on the top of the aircraft enables you to find the aircraft when flying at night. The beacon can be manually turned on or off in DJI Pilot 2.
DJI Mavic 3E/3T User Manual Flight Recorder Flight data, including flight telemetry, aircraft status information, and other parameters, are automatically saved to the internal data recorder of the aircraft. The data can be accessed using DJI Assistant 2 (Enterprise Series). Propellers There are two types of DJI Mavic 3E/3T Quick-Release Propellers designed to spin in different directions. Marks are used to indicate which propellers should be attached to which motors.
DJI Mavic 3E/3T User Manual • DO NOT attempt to modify the structure of the motors. • DO NOT touch or let hands or body parts come in contact with the motors after flight as they may be hot. • DO NOT block any of the ventilation holes on the motors or the body of the aircraft. • Make sure the ESCs sound normal when powered on. Intelligent Flight Battery The Mavic 3 Intelligent Flight Battery is a 15.4V, 5000mAh battery with smart charging and discharging functionality. Battery Features 1.
DJI Mavic 3E/3T User Manual 9. Battery Cell Damage Protection: the app will display a warning prompt when a damaged battery cell is detected. 10. Hibernation Mode: the battery switches off after 20 minutes of inactivity to save power. If the battery level is less than 5%, the battery enters Hibernation mode to prevent overdischarge after being idle for six hours. In Hibernation mode, the battery level indicators do not illuminate. Charge the battery to wake it from hibernation. 11.
DJI Mavic 3E/3T User Manual Powering On/Off Press the power button once, then press again, and hold for two seconds to power the battery on or off. The battery level LEDs display the battery level when the aircraft is powered on. Low-Temperature Notice 1. Battery capacity is significantly reduced when flying at low temperatures from -10° to 5° C (14° to 41° F). It is recommended to hover the aircraft in place for a while to heat the battery. Make sure to charge the battery fully before takeoff. 2.
DJI Mavic 3E/3T User Manual How to Charge 1. Insert the Intelligent Flight Battery into the battery port. Connect the charging hub to a power outlet (100-240 V, 50-60 Hz) using the DJI USB-C Power Adapter (100W). 2. The Intelligent Flight Battery with the highest power level will be charged first, and then the rest will be charged in sequence according to their power levels. Refer to the Status LED Indicator Descriptions for more information about the blinking patterns of the status LED indicator. 3.
DJI Mavic 3E/3T User Manual • DO NOT charge an Intelligent Flight Battery immediately after flight as it may be too hot. Wait for the battery to cool down to the operating temperature before charging again. • The charger stops charging the battery if the battery cell temperature is not within the operating range of 5° to 40° C (41° to 104° F). The ideal charging temperature is from 22° to 28° C (71.6° to 82.4° F). • Fully charge the battery at least once every three months to maintain battery health.
DJI Mavic 3E/3T User Manual If any of the battery protection mechanisms are activated, unplug the charger, and plug it in again to resume charging. If the charging temperature is abnormal, wait for it to return to normal. The battery will automatically resume charging without the need to unplug and plug the charger again. Inserting the Intelligent Flight Battery Insert the Intelligent Flight Battery into the battery compartment of the aircraft.
DJI Mavic 3E/3T User Manual Gimbal Gimbal Profile The DJI Mavic 3E/3T 3-axis gimbal stabilizes the camera, allowing you to capture clear and steady images and videos at high flight speed. The control tilt range is -90° to +35°. 35° 0° -90° Use the gimbal dial on the remote controller to control the tilt of the camera. Alternatively, enter the camera view in DJI Pilot 2. Press the screen until a circle appears and drag the circle up and down to control the tilt of the camera.
DJI Mavic 3E/3T User Manual Camera Camera Profile Both DJI Mavic 3E and DJI Mavic 3T integrate a tele camera and a wide camera, which enable users to quickly switch to a highly magnified zoom view for detailed observation after recognizing a target in the wide-angle camera view. Mavic 3T is also equipped with a long-wave infrared thermal imaging camera, which can shoot thermal images.
DJI Mavic 3E/3T User Manual Storing Photos and Videos A microSD card is in the microSD card slot when shipped. The aircraft supports microSD cards with a maximum capacity of up to 512 GB. To ensure that the camera can quickly read and write data for HD video recording, use a microSD card with UHS Speed Class 3 or above and a write speed greater than 30 MB/s. Refer to the Recommended microSD Cards in specifications. • DO NOT remove the microSD card from the aircraft when recording.
DJI Mavic 3E/3T User Manual Usage The following example illustrates how to install and use modular accessories. The RTK module is used as an example. 1. Remove the PSDK port cover on the top of the aircraft when the aircraft is powered off. 2. Mount the RTK module onto the PSDK port of the aircraft. 3. Tighten the knobs on both sides to ensure that the RTK module is firmly mounted onto the aircraft. 2 1 3 4. Power on the aircraft and launch DJI Pilot 2 to use the accessory.
DJI Mavic 3E/3T User Manual DJI D-RTK 2 Mobile Station 1. Refer to the D-RTK 2 High Precision GNSS Mobile Station User Guide (available from https://www.dji.com/mavic-3-enterprise/downloads) to set up the D-RTK 2 Mobile Station and link the aircraft and the station. Power on the D-RTK 2 Mobile Station and switch to the Broadcast mode for the Mavic 3 Enterprise Series. 2.
Remote Controller The DJI RC Pro Enterprise remote controller features O3 Enterprise. The latest version of DJI's signature OcuSync image transmission technology works at both 2.4 and 5.8 GHz, is capable of selecting the best transmission channel automatically, and can transmit a live HD view from the camera of the aircraft at a distance of up to 15 km. The built-in 5.
DJI Mavic 3E/3T User Manual 1. Time Displays current time. 2. DJI Pilot 2 App Tap to enter DJI Pilot 2. 3. Gallery Tap to view stored images and videos. 4. Files Tap to view stored files. 5. Browser Tap to open the browser. 6. Settings Tap to enter system settings. 7. Guide Tap to read the guide with detailed information on the remote controller buttons and LEDs. 8. Wi-Fi Signal Displays Wi-Fi signal strength when connected to a Wi-Fi network.
DJI Mavic 3E/3T User Manual Shortcut Settings Notifications 2 10:12 3 4 Sat, Mar 30 1 Wi-Fi Bluetooth Screenshot Mobile Do not distube Record Screen 5 Airplane 6 7 1. Notifications Tap to view system or app notifications. 2. Recent Tap to view and switch to recently opened apps. 3. Home Tap to return to the homepage. 4. System Settings Tap to access system settings. 5. Shortcuts : tap to enable or disable Wi-Fi. Hold to enter settings and connect to or add a Wi-Fi network.
DJI Mavic 3E/3T User Manual Remote Controller LEDs and Alerts Remote Controller LEDs Status LED Blinking Pattern Descriptions Solid red Disconnected from the aircraft Blinks red The temperature of the remote controller is too high, or the battery level of the aircraft is low Solid green Connected with the aircraft Blinks blue The remote controller is linking to an aircraft Solid yellow Firmware update failed Blinks yellow The battery level of the remote controller is low Blinks cyan Control
DJI Mavic 3E/3T User Manual Operation Powering On/Off Press the power button once to check the current battery level. Press once, then press again and hold for two seconds to power the remote controller on or off. Charging the Battery Use a USB-C cable to connect the charger to the USB-C port of the remote controller. Fully discharge and charge the remote controller every three months. The battery depletes when stored for an extended period.
DJI Mavic 3E/3T User Manual Controlling the Aircraft The control sticks can be operated in Mode 1, Mode 2, or Mode 3, as shown below. Mode 1 Left Stick Right Stick Forward Up Down Backward Turn Left Left Turn Right Right Mode 2 Left Stick Right Stick Up Forward Down Backward Turn Left Left Turn Right Right Mode 3 Left Stick Right Stick Forward Up Down Backward Left Right Turn Left Turn Right The default control mode of the remote controller is Mode 2.
DJI Mavic 3E/3T User Manual Remote Controller (Mode 2) Aircraft ( Indicates nose direction) Remarks Throttle Stick: moving the left stick up or down changes the altitude of the aircraft. Push the stick up to ascend and push down to descend. The aircraft hovers in place if the stick is in the center. Use the left stick to take off when the motors are spinning at an idle speed. The more the stick is pushed away from the center, the faster the aircraft changes elevation.
DJI Mavic 3E/3T User Manual Flight Mode Switch Toggle the switch to select the desired flight mode. Position Flight Mode F Function mode N Normal mode S Sport mode Function mode can be set to T-mode (Tripod mode) or A-mode (Attitude mode) in DJI Pilot 2. RTH Button Press and hold the RTH button until the remote controller beeps to start RTH. The aircraft will fly to the last updated Home Point. Press the button again to cancel RTH and regain control of the aircraft.
DJI Mavic 3E/3T User Manual Combination Operation Function Back Button + Left Dial Adjust Brightness Back Button + Right Dial Adjust Volume Back Button + Record Button Record Screen Back Button + Shutter Button Screenshot Back Button + 5D Button Toggle up - Home; Toggle down - Shortcut settings; Toggle left - Recently opened apps Optimal Transmission Zone The signal between the aircraft and the remote controller is most reliable when the antennas are positioned in relation to the aircraft, as il
DJI Mavic 3E/3T User Manual Method 2: Using DJI Pilot 2 1. Power on the aircraft and the remote controller. 2. Run DJI Pilot 2 and tap Link Remote Controller to link. The status LED of the remote controller blinks blue, and the remote controller beeps. 3. Press and hold the power button of the aircraft for more than four seconds. The aircraft beeps twice after a short beep, and its battery level LEDs blink in sequence to indicate it is ready to link.
DJI Pilot 2 App The DJI Pilot 2 app is specifically developed for enterprise users. Manual flight integrates a variety of professional features that make flying simple and intuitive. Flight task supports flight planning and autonomous operation of the aircraft, making your workflow much simpler and more efficient. Homepage 1 2 3 4 8 5 6 9 10 7 1.
DJI Mavic 3E/3T User Manual a b c a. Tap to update the GEO Zone database of the remote controller if an update is available. b. Tap to update the GEO Zone database of the aircraft if an update is available. c. Tap to enter and manage the unlocking certificate. If the aircraft is already connected to the remote controller, users can select the unlocking certificate directly to unlock the aircraft. 4.
DJI Mavic 3E/3T User Manual 5. Flight Route Tap to enter the flight route library. Users can create and view all flight tasks. Flight tasks can be imported and exported in batches to the remote controller or another external mobile storage device. If DJI FlightHub 2 is connected, you can also view all flight tasks sent from or upload local flight tasks to the cloud. Refer to the Flight Task section for more details. 6. Album Tap to view your media all in one place.
DJI Mavic 3E/3T User Manual 9. Firmware Update Shortcut If an update is necessary, a prompt will appear notifying the user that new firmware is available or a consistent firmware update is needed for the aircraft and remote controller. Inconsistent firmware versions will affect flight safety. The app will prioritize consistent firmware updates. Tap the prompt to enter the firmware update page.
DJI Mavic 3E/3T User Manual Camera View Introduction After tapping Enter Camera View on the home screen of DJI Pilot 2 and completing the Preflight Check, users will be directed to the camera view. The introduction below is based on the Mavic 3T Zoom mode. Features marked with * are only available on Mavic 3T. 19 20 21 1 2 3 4 5 6 7 8 18 9 17 10 16 11 12 15 14 13 1. Top Bar: displays the aircraft status, flight mode, signal quality, etc. Refer to the Top Bar section for more details. 2.
DJI Mavic 3E/3T User Manual 9. Photo/Video Mode: tap to switch between photo and video modes and select different shooting options. a. Photo mode includes single, smart low-light, timed, and pano shots. b. Different resolution options are available when shooting videos. Tele and wide cameras support recording at 3840×2160 and 1920×1080. 10. Shutter/Record Button: tap to take a photo or start or stop recording. 11. Playback: tap to view and download photos or videos stored on the aircraft microSD card. 12.
DJI Mavic 3E/3T User Manual 21. Flight Task Status: displays the progress of a flight task in the camera view. Tap the Pause/Resume button to pause or resume the task and tap the panel to view the flight task details. Top Bar 1 2 3 4 5 6 7 8 1. Back: tap to return to the home screen of the DJI Pilot 2 app. 2. System Status Bar: indicates the aircraft flight status and displays various warning messages.
DJI Mavic 3E/3T User Manual 5. GNSS Positioning Status: displays the number of searched satellites. RTK is only displayed after the RTK module is installed. When the RTK service is not enabled, the RTK icon is gray. When the RTK data is converged, the RTK icon will turn white. Tap the GNSS positioning status icon to view the RTK mode and GNSS positioning information. 6. Signal Strength: includes the video and control signal quality.
DJI Mavic 3E/3T User Manual Navigation Display 13 12 3 14 12 4 11 5 10 6 9 8 7 1. Aircraft: the attitude indicator will rotate as the aircraft changes its orientation. 2. Aircraft Orientation: displays the current orientation of the aircraft. The compass has 360° in total, and each direction is separated by 30°. The north corresponds to 0 and 360°. For example, when the aircraft points at the number 24, it represents that the aircraft yaws 240° in a clockwise direction starting north. 3.
DJI Mavic 3E/3T User Manual c. The pointer on the blue dot can be used to indicate the direction the remote controller is facing when the compass of the remote controller is functioning properly. During the flight and when the signal is weak, the user can adjust the position of the remote controller and make the pointer of the blue dot face the direction of the aircraft to improve signal transmission. 9.
DJI Mavic 3E/3T User Manual Wide Mode This section mainly sets out the differences with the zoom mode. Refer to the Camera View section for more details. Zoom Frame: after switching to the wide mode as the main view, the field of view and camera zoom ratio will be displayed on the zoom frame. IR Mode* This section mainly sets out the differences with the zoom mode. Refer to the Camera View section for more details. 1 2 3 4 5 67 © 2022 DJI All Rights Reserved.
DJI Mavic 3E/3T User Manual 1. Palette: displays the highest and lowest temperature measurement values of the current view. Tap to choose between different infrared temperature measurement palettes or enable the isotherm to set temperature measurement intervals. Note that if the measured area exceeds the maximum or minimum temperature measurement values of the current view, the setting will not take effect. 2.
DJI Mavic 3E/3T User Manual Map View 7 1 6 2 5 4 3 1. Tap to draw a line on the map. 2. Tap to draw an area on the map. 3. Tap to clear the flight route of the aircraft. 4. Map Layer Selection: tap to select a satellite or street map (standard mode) according to operational requirements. 5. Map Lock: when enabled, the map cannot be rotated; when disabled, the map can be rotated freely. 6. Recenter View: tap to quickly center the remote controller location in the view. 7.
DJI Mavic 3E/3T User Manual Annotation Management and Synchronization PinPoint For quick observation and information synchronization, PinPoint can be used to mark the aircraft location in the camera view or the center point of the map in the map view. Steps to create a PinPoint in the camera view: adjust aircraft location, tap the PinPoint icon on the left side of the screen. PinPoint can be set based on the current aircraft location and includes the latitude, longitude, and altitude of the aircraft.
DJI Mavic 3E/3T User Manual 4. Switch to Map View: a. The PinPoint and its name will be displayed on the map accordingly. b. In map view, you can add a PinPoint by dragging the point to the crosshairs in the center of the map. The altitude is the current flight altitude of the aircraft. c. Tap to select a PinPoint on the map to view the creator of the point, the distance between the PinPoint and aircraft, and the altitude, latitude, and longitude.
DJI Mavic 3E/3T User Manual 1 2 3 4 5 6 7 1. Tap to export all PinPoints to the local folder of the remote controller. 2. Tap to close the current panel. 3. Filter the PinPoints by color. Multiple colors can be selected, and PinPoints will be filtered by the colors selected. 4. Filter the PinPoints by their visibility in the video transmission view.
DJI Mavic 3E/3T User Manual Line and Area Annotation Management Users can draw lines and areas on the map to synchronize key information about roads and land. 1 2 1 2 1. Tap to display the Edit Line view. 2. Tap to display the Edit Area view. Annotation Sharing For information sharing, the location of the PinPoint identified by the PinPoint feature can be synchronized with the camera view, Navigation Display, map view, and DJI FlightHub 2. It can be displayed on both camera and map views.
DJI Mavic 3E/3T User Manual Flight Tasks Tap on the home screen of DJI Pilot 2 to enter the flight route library. Users can view flight tasks or create a waypoint, mapping, oblique, or linear flight tasks. These four types of tasks are generated by the app. Meanwhile, waypoint flight tasks can also be created through Live Mission Recording.
DJI Mavic 3E/3T User Manual Waypoint Flights - Set Waypoints Tap Create a Route, Waypoint, and then Set Waypoints to create a flight route. Tap on the map to add waypoints, then configure route and waypoint settings. 1 2 3 4 6 5 7 8 9 10 1. Point of Interest (POI): tap to enable the POI feature, and a POI will be displayed on the map. Drag to adjust its position. After a POI is added, the aircraft yaw can be set as facing the POI, so the aircraft nose always faces the POI during the task.
DJI Mavic 3E/3T User Manual Waypoint Flights - Live Mission Recording Tap Create a Route, Waypoint, and then Live Mission Rec to record photo information and the waypoint location of the aircraft. 2 3 1 4 1. Control the gimbal, adjust the zoom scale, and aim at the target. Tap to capture photos or press the C1 button of the remote controller to add a waypoint. The number of waypoints and photos will be added accordingly. 2. The number of planned waypoints. 3. The number of planned photos. 4.
DJI Mavic 3E/3T User Manual 1. Tap to perform the current task. 2. Tap to enter the Flight Route Editing. The edits will be merged into the original route once saved. 3. Tap to enter the Set Waypoints page. Health Management System (HMS) The HMS system includes: DJI Maintenance Program, DJI Care Enterprise, Firmware Update, Manage Logs, Error Records, and Error Diagnosis. 1 2 3 4 5 6 1. Error Diagnosis: for checking the current status of each aircraft module.
DJI Mavic 3E/3T User Manual DJI FlightHub 2 Paired with the DJI FlightHub 2 cloud platform, the Mavic 3 Enterprise Series offer integrated air and ground handling with efficient operation management.
Appendix Specifications Aircraft Weight (with propellers, Mavic 3E: 915 g Mavic 3T: 920 g without accessories)[1] Max Takeoff Weight 1050 g Dimensions Folded (without propellers): 221×96.3×90.3 mm Unfolded (without propellers): 347.5×283×107.7 mm Diagonal Distance 380.
DJI Mavic 3E/3T User Manual Mechanical Range Tilt: -135° to 100° Roll: -45° to 45° Pan: -27° to 27° Controllable Range Tilt: -90° to 35° Pan: not controllable Max Control Speed (tilt) 100°/s Tilt: -135° to 45° Roll: -45° to 45° Pan: -27° to 27° Angular Vibration Range ±0.007° Wide Camera Mavic 3E Mavic 3T Sensor 4/3 CMOS, Effective pixels: 20 MP 1/2" CMOS, Effective pixels: 48 MP Lens FOV: 84° Format Equivalent: 24 mm Aperture: f/2.
DJI Mavic 3E/3T User Manual Still Photography Modes Single: 12 MP Timed: 12 MP JPEG: 0.7/1/2/3/5/7/10/15/20/30/60 s Smart Low-light Shooting: 12 MP Video Resolution H.
DJI Mavic 3E/3T User Manual Backward Measurement Range: 0.5-16 m Effective Sensing Speed: Flight Speed ≤12 m/s FOV: Horizontal 90°, Vertical 103° Lateral Measurement Range: 0.5-25 m Effective Sensing Speed: Flight Speed ≤15 m/s FOV: Horizontal 90°, Vertical 85° Upward Measurement Range: 0.2-10 m Effective Sensing Speed: Flight Speed ≤6 m/s FOV: Front and Back 100°, Left and Right 90° Downward Measurement Range: 0.
DJI Mavic 3E/3T User Manual Charging Type Recommended to be charged with the included DJI USB-C Power Adapter (100W) or USB charger at 12 V or 15 V Charging Time Approx. 1 hour 30 minutes (with the included DJI USB-C Power Adapter (100W) only charging the remote controller or a USB charger at 15 V) Approx. 2 hours (with a USB charger at 12 V) Operating Time Approx.
DJI Mavic 3E/3T User Manual Storage Supported Memory Cards Aircraft: U3/Class10/V30 or above is required. A list of recommended microSD cards can be found below.
DJI Mavic 3E/3T User Manual [1] The standard weight of the aircraft (including the battery, propellers, and a microSD card). The actual product weight may vary due to differences in batch materials and external factors. [2] In some countries and regions, the 5.8 and 5.1GHz frequencies are prohibited, or the 5.1GHz frequency is only allowed for indoor use. Check local laws and regulations for more information. [3] Measured in an unobstructed environment free of interference.
DJI Mavic 3E/3T User Manual Firmware Update Use DJI Pilot 2 or DJI Assistant 2 (Enterprise Series) to update the remote controller, aircraft, and other connected DJI devices. Using DJI Pilot 2 1. Power on the aircraft and remote controller. Ensure the aircraft is linked to the remote controller, their battery levels are higher than 25%, and the remote controller is connected to the internet. 2. Run DJI Pilot 2. A prompt will appear on the homepage if new firmware is available.
DJI Mavic 3E/3T User Manual • The battery firmware is included in the aircraft firmware. Be sure to update all batteries. • Make sure that the battery levels of the aircraft and remote controller are higher than 25% before updating. • Make sure all DJI devices are connected properly to the computer during an update. • During the update process, it is normal for the gimbal to go limp, the aircraft status indicators to blink, and the aircraft to reboot. Wait patiently for the update to complete.
WE ARE HERE FOR YOU Contact DJI SUPPORT This content is subject to change. Download the latest version from https://www.dji.com/mavic-3-enterprise/downloads If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. and MAVIC are trademarks of DJI. Copyright © 2022 DJI All Rights Reserved. 88 © 2022 DJI All Rights Reserved.
