Mavic 3 Enterprise - User Manual v1.0

Table Of Contents

DJI Mavic 3E/3T User Manual

4. Power on the aircraft and launch DJI Pilot 2 to use the accessory.

• Make sure that the accessories are correctly and securely mounted on the aircraft

before use. Otherwise, they may fall from the aircraft during flight.

• DO NOT use the speaker near people or in an urban area where noise-sensitive

structures are concentrated, as the loudness could lead to accidents or injuries.

• It is recommended to use the DJI RC Pro Enterprise remote controller to play vocals or

import a vocal source for the best playback effect. It is not recommended to play single-

frequency sounds such as an alarm to avoid irreversible damage to the speaker.

• The RTK module does not support hot swapping. Please avoid blocking the RTK module

to ensure positioning accuracy.

Using the RTK Module

Enabling/Disabling RTK

Ensure that the RTK function is enabled and the RTK service type is correctly set (D-RTK

2 Mobile Station or Network RTK) before each use. Otherwise, RTK cannot be used for

positioning. Go to the camera view in the DJI Pilot 2 app, tap

-> , to check the settings.

Make sure to disable the RTK function if not in use. Otherwise, the aircraft will not be able

to take off when there is no differential data.

• RTK positioning can be enabled and disabled during flight. Remember to select an RTK

service type first.

• After RTK is enabled, Maintain Positioning Accuracy mode can be used.

Usage

The following example illustrates how to install and use modular accessories. The RTK

module is used as an example.

1. Remove the PSDK port cover on the top of the aircraft when the aircraft is powered off.

2. Mount the RTK module onto the PSDK port of the aircraft.

3. Tighten the knobs on both sides to ensure that the RTK module is firmly mounted onto

the aircraft.