User Manual

DJI Avata
User Manual
28
© 2022 DJI All Rights Reserved.
Intelligent Flight Battery
The Avata Intelligent Flight Battery is a 14.76 V, 2420 mAh battery with smart charging and discharging
functionality.
Battery Features
1. Battery Level Display: The battery level LEDs display the current battery level.
2. Auto-Discharging Function: To prevent swelling, the battery automatically discharges to approximately 96%
of the battery level when it is idle for one day, and approximately 60% when idle for ve days. It is normal to
feel moderate heat from the battery, while it is discharging.
3. Balanced Charging: During charging, the voltages of the battery cells are automatically balanced.
4. Overcharge Protection: The battery stops charging automatically once fully charged.
5. Temperature Detection: To prevent damage, the battery only charges when the temperature is between 5°
and 40° C (41° and 104° F). Charging stops automatically if the temperature of the battery exceeds 50° C
(122° F) during charging.
6. Overcurrent Protection: The battery stops charging if an excess current is detected.
7. Over-Discharge Protection: Discharging stops automatically to prevent excess discharge when the battery is
not in use. Over-discharge protection is not enabled when the battery is in use.
8. Short Circuit Protection: The power supply is automatically cut if a short circuit is detected.
9. Battery Cell Damage Protection: DJI goggles display a warning prompt when a damaged battery cell is
detected.
10. Hibernation Mode: The battery switches o after 20 minutes of inactivity to save power. If the battery level
is less than 10%, the battery enters Hibernation mode to prevent over-discharge after being idle for six
hours. In Hibernation mode, the battery level indicators do not illuminate. Charge the battery to wake it from
hibernation.
11. Communication: Information about the voltage, capacity, and current of the battery is transmitted to the
aircraft.
Refer to the DJI Avata Safety Guidelines and the stickers on the battery before use. Users shall take full
responsibility for all operations and usage.
Using the Battery
Checking the Battery Level
Press the power button once to check the battery level.
LED2
LED3
LED4
LED1
Battery Level LEDs
Power Button