User Manual

DJI Avata
User Manual
31
© 2022 DJI All Rights Reserved.
Battery Protection Mechanisms
The battery level LEDs can display battery protection notications triggered by abnormal charging conditions.
Battery Protection Mechanisms
LED1 LED2 LED3 LED4
Blinking Pattern Status
LED2 blinks twice per second Overcurrent detected
LED2 blinks three times per second System abnormal
LED3 blinks twice per second Overcharge detected
LED3 blinks three times per second
Over-voltage charger
detected
LED4 blinks twice per second
Charging temperature
is too low
LED4 blinks three times per second
Charging temperature
is too high
LED4 blinks four times per second Non-DJI adapter
If any of the battery protection mechanisms are activated, unplug the charger, and plug it in again to resume
charging. If the charging temperature is abnormal, wait for it to return to normal and the battery will automatically
resume charging without the need to unplug and plug the charger again.
Installing/Removing the Battery
Install the Intelligent Flight Battery in the aircraft before use. Insert the Intelligent Flight Battery into the battery
compartment of the aircraft. Make sure it is mounted securely and that the battery buckles are clicked into place
before connecting it to the power port.
3
1
2
Disconnect the power port, press the battery buckles on the sides of the Intelligent Flight Battery, and remove it
from the compartment.
1
2
Click
DO NOT insert or remove the battery while the aircraft is powered on.
Make sure the battery is mounted securely.