User Manual

DJI Avata
User Manual
35
© 2022 DJI All Rights Reserved.
Using the Eyeglass Frames
The goggles support diopter adjustment in the range of -8.0 D to +2.0 D. The goggles do not support astigmatism
correction. If you require astigmatism correction or the goggles’ diopter is unsuitable, you can purchase additional
lenses and use the eyeglass frames to install them on the goggles.
When purchasing lenses, bring the eyeglass frames (a pair) to a professional optical shop to ensure
that the shape, size, astigmatism axis, and edge thickness (< 2.8 mm) of the lenses meet the
installation requirements of the eyeglass frames.
The overall diopter is the sum of the goggles’ diopter and the diopter of the additional lenses. Make
sure to adjust the diopter of the goggles rst and lock the knobs before installing the eyeglass frames.
If the installed lens supports astigmatism correction, do not rotate the knob after the eyeglass frame is
installed. Otherwise, the astigmatism axis will shift resulting in blurred vision. Make sure to adjust the
diopter of the goggles before installing the eyeglass frames.
1. Detach the eyeglass frame and remove the original dummy lens.
< 2.8 mm
2. Install the prepared lens as shown. Make sure to distinguish the left lens and the right one.
< 2.8 mm
3. Adjust the diopter of the goggles according to your needs and lock the knobs.
For example, if you usually wear -6.0 D glasses and the self-prepared lens is -3.0 D, then you will need to
adjust the diopter of the goggles to -3.0 D to ensure that the overall diopter is -6.0 D after the eyeglass frame
is installed on the goggles.
< 2.8 mm