User Manual

DJI Avata
User Manual
50
© 2022 DJI All Rights Reserved.
Brake Button
Lock Button
Mode Button
Lock Button
Press twice to start the motors of the aircraft.
Press and hold to make the aircraft take o automatically, ascend to approximately 1.2 m, and hover.
Press and hold while the aircraft is hovering to land it automatically and stop the motors.
Press once to cancel Low Battery RTH when the countdown appears in the goggles.
Critical Low Battery landing cannot be canceled.
Brake Button
Press once to make the aircraft brake and hover in place. Press again to unlock the attitude.
If the aircraft is performing RTH or auto landing, press once to exit.
Press and hold the brake button until the motion controller beeps to indicate that RTH has started. Press the
button again to cancel RTH and regain control of the aircraft.
Mode Button
Press once to switch between Normal and Sport mode. The current mode is displayed in the goggles.
Motion Controller Alert
The motion controller sounds an alert during RTH. The alert cannot be canceled. The motion controller sounds an
alert when the battery level is 6% to 15%. A low battery level alert can be canceled by pressing the power button.
A critical battery level alert will sound when the battery level is less than 5% and cannot be canceled.