User Manual

DJI Avata
User Manual
51
© 2022 DJI All Rights Reserved.
In order to avoid interference, DO NOT use other wireless devices on the same frequency as the
motion controller.
Motion Controller Calibration
The compass, IMU, and accelerator of the motion controller can be calibrated. Immediately calibrate any of the
modules when prompted to do so.
On the linked goggles, go to Settings > Control > Motion Controller > Motion Controller Calibration. Select the
module and follow the prompts to complete calibration.
DO NOT calibrate your compass in locations with strong magnetic interference, such as near magnets,
parking lots, or construction sites with underground reinforced concrete structures.
DO NOT carry ferromagnetic materials such as mobile phones during calibration.
Optimal Transmission Zone
The signal between the aircraft and the motion controller is most reliable when the motion controller is positioned
in relation to the aircraft as shown below.
Optimal Transmission Zone