User Manual

DJI Avata
User Manual
61
© 2022 DJI All Rights Reserved.
GEO Zones
DJI’s GEO system designates safe ight locations, provides risk levels and safety notices for individual ights, and
oers information on restricted airspace. All restricted ight areas are referred to as GEO Zones, which are further
divided into Restricted Zones, Authorization Zones, Warning Zones, Enhanced Warning Zones, and Altitude
Zones. Users can view such information in real-time in DJI Fly. GEO Zones are specic ight areas, including but
not limited to airports, large event venues, locations where public emergencies have occurred (such as forest
res), nuclear power plants, prisons, government properties, and military facilities. By default, the GEO system
limits takeos and ights in zones that may cause safety or security concerns. A GEO Zone map that contains
comprehensive information on GEO Zones around the globe is available on the ocial DJI website: https://www.
dji.com/ysafe/geo-map.
Pre-Flight Checklist
1. Make sure the goggles battery, remote control devices, Intelligent Flight Battery, and mobile device are fully
charged.
2. Make sure the propellers are mounted correctly and securely.
3. Make sure the Intelligent Flight Battery and goggles battery are properly connected and secure.
4. Make sure the USB-C port and microSD card slot cover is correctly and securely sealed.
5. Make sure the gimbal and camera are functioning normally.
6. Make sure that there is nothing obstructing the motors and that they are functioning normally.
7. Make sure that the goggles are functioning normally and display the video transmission.
8. Make sure that the gimbal protector is detached and the camera lens and the sensors are clean.
9. Make sure that the goggles antennas are installed securely and the remote controller antenna is lifted.
10. Only use genuine DJI parts or DJI authorized parts. Unauthorized parts may cause system malfunctions and
compromise ght safety.
Starting/Stopping the Motors
DJI Motion Controller
Lock Button
Press the lock button twice to start the motors of the aircraft.
Press and hold the lock button to make the aircraft take o automatically, ascend to approximately 1.2 m, and hover.
Press and hold the lock button while the aircraft is hovering to land it automatically and stop the motors.