User Manual
Table Of Contents
DJI Avata
User Manual
63
© 2022 DJI All Rights Reserved.
Stopping the Motors Mid-Flight
When using Normal or Sport mode, the motors can only be stopped by pressing the lock button twice on the
motion controller or performing a CSC on the remote controller mid-ight in an emergency situation such as if
the aircraft has a stalled motor, is involved in a collision, is rolling in the air, is out of control, or is ascending or
descending quickly. The default setting can be changed in goggles.
When using the Manual mode, press the start/stop button twice on the remote controller to stop the motors at
any time.
Stopping motors mid-ight will cause the aircraft to crash.
Flight Test
Takeo/Landing Procedures
1. Place the aircraft in an open, at area with the aircraft rear facing towards you.
2. Power on the goggles, remote control device, and the aircraft.
3. Wait until the aircraft status indicator blinks green slowly to indicate that the Home Point has been recorded
and put on the goggles.
4. Start the motors.
5. For DJI motion controller, press and hold the lock button, to make the aircraft take o automatically, ascend to
approximately 1.2 m, and hover.
For DJI FPV remote controller V2, gently push the throttle stick up to take o.
6. For DJI motion controller, press and hold the lock button while the aircraft is hovering to land it automatically
and stop the motors.
For DJI FPV remote controller V2, pull the throttle stick down to land the aircraft. Stop the motors after landing.
7. Power o the aircraft, goggles, and remote control device.
Video Suggestions and Tips
1. The pre-ight checklist is designed to help you y safely and shoot videos during ight. Go through the full pre-
ight checklist before each ight.
2. Select the desired gimbal operation mode.
3. It is recommended to use Normal mode to take photos or record videos.
4. DO NOT y in bad weather such as on rainy or windy days.
5. Choose the camera settings that best suit your needs.
6. Perform ight tests to establish ight routes and preview scenes.
7. Push the control sticks gently to ensure smooth and stable movement of the aircraft.
8. When using Manual mode, y in an open, wide, and sparsely populated environment to ensure ight safety.
It is important to understand the basic ight guidelines, both for your protection and for the safety
of those around you.
DO NOT forget to read the safety guidelines.