User Manual

DJI Avata
User Manual
75
© 2022 DJI All Rights Reserved.
2. Align the positioning columns of the new foam padding with the positioning holes on the goggles, install it and
press the left and right sides. After hearing a "click", check and make sure that there is no gap between the
foam padding and the goggles.
Cleaning and Maintenance of the Lenses
Use a piece of soft, dry, and clean cloth to wipe in a circular motion from the center to the outer edges of each
lens.
Re-attach the screen protector to protect the lenses when the goggles are not in use.
Make sure to disconnect the goggles from the power outlet before cleaning and make sure that no
cables are connected.
DO NOT clean the lenses with alcohol.
The lenses are delicate. Clean them gently. DO NOT scratch them as this will aect viewing quality.
Store the goggles in a dry place at room temperature to avoid damage to the lenses and other optical
components from high temperatures and humid environments.
Keep the lenses away from direct sunlight to avoid screen damage.
DO NOT pull the sides when removing the foam padding. Otherwise, the padding may be damaged.