User Manual

DJI Avata
User Manual
76
© 2022 DJI All Rights Reserved.
DJI FPV Goggles V2
Cleaning
Make sure to disconnect the goggles from the power outlet before cleaning and make sure that there are no
cables connected.
Clean the surface of the goggles with a soft, dry, clean cloth. To clean the foam padding, moisten the cloth with
clean water and wipe the foam padding.
Replacing the Foam Padding
The foam padding is attached to the goggles with Velcro. When replacing the foam padding, peel it gradually
from the left or right side. Align the new foam padding with the goggles and press the foam padding down so it is
securely attached.
Maintenance of Lenses
Use a cleaning cloth to wipe the lenses gently.
1. Moisten the cleaning cloth with alcohol or a lens cleaner.
2. Wipe in a circular motion from the center to the outer edges of the lenses.
DO NOT clean the foam padding with alcohol.
The lenses are delicate. Clean them gently. DO NOT scratch them as this will aect viewing quality.
Store the goggles in a dry room at room temperature to avoid damage to the lenses from high
temperature and humid environments.