User Manual
Table Of Contents
DJI Avata
User Manual
79
© 2022 DJI All Rights Reserved.
SD Cards
Supported microSD Cards microSD card, UHS-I Speed Grade 3
Recommended microSD
Cards
SanDisk Extreme 32GB U3 V30 A1 microSDXC
SanDisk Extreme Pro 32GB U3 V30 A1 microSDXC
Kingston Canvas Go!Plus 64GB U3 V30 A2 microSDXC
Kingston Canvas React Plus 64GB U3 V90 A1 microSDXC
Kingston Canvas React Plus 128GB U3 V90 A1 microSDXC
Kingston Canvas React Plus 256GB U3 V90 A1 microSDXC
Samsung PRO Plus 256GB V30 U3 V30 A2 microSDXC
DJI Avata dissipates heat by using the airow of the propellers to prevent the aircraft from overheating.
When the aircraft is in standby mode for a long time, the temperature may rise. In this situation, the
built-in temperature control system can detect the current temperature and will power o the aircraft
automatically to prevent overheating. The general standby time periods of the aircraft in the stationary
state are as follows. If these times are exceeded, the aircraft may automatically power o to prevent
overheating (tested in an indoor environment with an ambient temperature of 25℃).
a. When in standby mode on the ground: about 21 minutes;
b. When updating rmware: about 18 minutes (please update within 10 minutes of powering on the
aircraft, otherwise the update may fail due to overheating);
c. When connecting to the computer using the USB-C port, the aircraft will not overheat and can be
used for longer.
These specications have been determined through tests conducted with the latest rmware. Firmware
updates can enhance performance. It is highly recommended to update to the latest rmware.