User Manual
Table Of Contents
DJI Avata
User Manual
83
© 2022 DJI All Rights Reserved.
Firmware Update
Use one of the following methods to update the rmware:
1. Use the DJI Fly App to update the rmware for the entire set of devices including the aircraft, goggles, and
remote control device.
2. Use DJI Assistant 2 (Consumer Drones Series) to update the rmware for a single device.
Using DJI Fly
Power on the aircraft, goggles, and remote control device. Make sure all the devices are linked. Connect the
USB-C port of the goggles to the mobile device, run DJI Fly, and follow the prompt to update. An internet
connection is required.
Using DJI Assistant 2 (Consumer Drones Series)
1. Power on the device and connect it to a computer with a USB-C cable.
2. Launch DJI Assistant 2 (Consumer Drones Series) and log in with a DJI account.
3. Select the device and click “Firmware Update” on the left side of the screen.
4. Select the rmware version.
5. The rmware will be downloaded and updated automatically.
6. The device will restart automatically after the rmware update is complete.
Make sure to follow all the steps to update the rmware, otherwise the update may fail.
The rmware update will take several minutes. When updating the rmware, it is normal for the gimbal
to go limp, and the aircraft to reboot. Wait until the update is complete.
Make sure the computer is connected to the internet during the update.
Make sure that the device has sucient power before updating the rmware.
Do not unplug the USB-C cable during an update.
If there are any additional batteries that needs to be updated after the update is complete, insert it into
the aircraft and power on the aircraft. A prompt will appear in the goggles to update the battery. Make
sure to update the battery before takeo.
Note that the update may reset various ight parameters such as the RTH altitude and the maximum
flight distance. Before updating, take note of your preferred settings and readjust them after the
update.
Aftersales Information
Visit https://www.dji.com/support to learn more about aftersales service policies, repair services, and support.