User Manual

MATRICE 200

Series User Manual

USB Port

USB port is used to connect orther devices, without power supply during ight.

Expansion Ports

1 2 3 4 5 6

Pins Descriptions

PWM power level is 3.3V and all pins can be congured in DJI Pilot app.

Number 1 2 3 4 5 6

Name OSDK port I/O port I/O port I/O port I/O port I/O port

Pins

(from up to down)

SDK_Tx IO/PWM5 IO/PWM4 IO/PWM3 IO/PWM2 IO/PWM1

SDK_Rx NC NC CANL CANH GND 5V

GND GND GND GND GND GND

*Coming soon.

CAN Bus Port can be used to connect to an expansion GPS module.

CANL CANH GND 5V

RC/Aircraft Linking Button and Indicator

Used to link between aircraft and Remote Controller, and the built-in LED will display the linking

status during linking procedure.

Expansion Ports

M210/M210 RTK provides several I/O ports, which can be customized in DJI Pilot app.