User Manual
©
2017 DJI All Rights Reserved.
41
MATRICE 200
Series User Manual
Power on the Intelligent Flight Battery and toggle the USB Mode Switch left, and connect the aircraft
and the PC via a double A port USB cable for aircraft parameters configuration and firmware
update.
Toggle the USB Mode Switch to the middle RTK position, and connect the aircraft and the PC via a
double A port USB cable for the built-in D-RTK Air system activation and rmware update.
Toggle the USB Mode Switch right and connect the aircraft and mobile device via a Micro USB cable.
Extended Power Port (XT30)
Used to supply power for other device, whose voltage range is from 18 V to 26 V with a current of 2 A.
Make sure your device is satised with the voltage and current requirement.
USB Mode Switch