User Manual

ManualsBrandsDJI ManualsDronesMavic 2 Pro Drone

Mavic 2 Pro/Zoom User Manual

1. Take off and hover at least 6.6 ft (2 m) above the ground.

2 m

2. In DJI GO 4, tap , then select QuickShots and follow the prompts.

In flight (GPS)

Position

61%

09:29

ISO

SHUT TEREV

CAPACITY

1600

1/8000

0.3

4K/25

AFC/MF

Dronie

Circle

Helix

Rocket

Boomerang

Asteroid

Dolly Zoom

3. Select your target subject in Camera View (tap the circle on the subject or drag a box around the

subject) and choose a shooting mode. Tap “GO” to begin recording. The aircraft flies back to its

original position once shooting is finished.

4. Tap to access the video.

Exiting QuickShots

Toggle the Flight Mode switch to S-mode or T-mode to exit QuickShots anytime during shooting

(when Multiple Flight Modes is enabled in DJI GO 4). Press the Flight Pause button on the remote

controller or tap in DJI GO 4 or for the emergency brake.

Please use QuickShots at locations that are clear of buildings and other obstacles. Make sure that

there is no human, animals or other obstacles on the flight path. The aircraft brakes and hovers in

place when an obstacle is detected.

Always pay attention to objects around the aircraft and use the remote controller to avoid

accidents (such as collisions) or occlusion with the aircraft.

Be extra cautious when using QuickShots in any of the following situations: a.

When the subject is blocked for a long time or outside the line of sight. b. When

the subject is more than 50 m away from the aircraft.

c. When the subject is similar in color or patterns with the surrounding.

d. When the subject is in the air.

e. When the subject moves fast.

f. The lighting is extremely low (< 300 lux) or high (> 10,000 lux).

DO NOT use QuickShots in places that are close to buildings or where the GPS signal is weak.

Otherwise, the flight path will be unstable.

You must follow local privacy laws and regulations when using QuickShots.

Note that the Lateral Vision Systems are enabled in QuickShots sub-modes of Circle, Helix, and

Boomerang (when using firmware v01.00.01.00 or above).