User Manual

Flight

Once pre-flight preparation is complete, it is recommended to use the flight simulator in DJI GO 4 to

hone your flight skills and practice flying safely. Ensure that all flights are carried out in an open area.

Refer to the Remote Controller and DJI GO 4 sections for information about using the remote

controller and the app to control the aircraft.

Flight Environment Requirements

1. Do not use the aircraft in severe weather conditions including wind speeds exceeding 10 m/s,

snow, rain, and fog.

2. Fly in open areas. Tall structures and large metal structures may affect the accuracy of the

onboard compass and GPS system.

3. Avoid obstacles, crowds, high voltage power lines, trees, and bodies of water.

4. Minimize interference by avoiding areas with high levels of electromagnetism such as locations

near power lines, base stations, electrical substations, and broadcasting towers.

5. Aircraft and battery performance is subject to environmental factors such as air density and

temperature. Be very careful when flying 19685 ft (6000 m) or more above sea level, since

battery and aircraft performance may be reduced.

6. The Mavic 2 cannot use GPS within the polar regions. Use the Downward Vision System when

flying in such locations.

Flight Limits and GEO Zones

Abide by all laws and regulations when flying your Mavic 2 Pro/Zoom. Flight limitations are applied

by default to help users operate this product safely and legally. Flight limitations include altitude

limits, distance limits, and GEO Zones.

Altitude limits, distance limits, and GEO Zones function concurrently to manage flight safety when

operating in P-mode.

Flight Altitude and Distance Limits

The flight altitude and distance limits may be changed in DJI GO 4. The maximum flight altitude

setting cannot exceed 1640 ft (500 m). Based on these settings, the aircraft will fly in a restricted

cylinder, as shown below:

Max Flight Altitude

Max Radius

Height of aircraft

Home Point

when turned on