User Manual

Mavic 2 Pro/Zoom User Manual
Intelligent Flight Battery
Capacity
3850 mAh
Voltage
15.4 V
Max Charging Voltage
17.6 V
Battery Type
LiPo 4S
Energy
59.29 Wh
Net Weight
297 g
Charging Temperature
5℃ - 40℃
Range
Max Charging Power
80 W
APP
Video Transmission System
OcuSync 2.0
Name
DJI GO 4
Remote Controller: 720p@30fps / 1080p@30fps
Live View Quality
DJI Goggles: 720p@30fps / 1080p@30fps
DJI Goggles RE: 720p@30fps / 1080p@30fps
Latency (depending on
environmental conditions
120 - 130 ms
and mobile device)
Required Operating
iOS 10.0.2 or later
System
Android 4.4 or later
Calibrating the Compass
It is recommended that the compass is calibrated in any of the following situations when flying outdoors:
1. Flying at a location farther than 31 miles (50 km) away from the location the drone was last flown.
2. The aircraft has not been flown for more than 30 days.
3. A compass interference warning appears in DJI GO 4 and/or the Aircraft Status Indicators blink
alternating red and yellow.
DO NOT calibrate the compass in locations where magnetic interference may occur, such as
close to magnetite deposits or large metallic structures such as parking structures, steel
reinforced basements, bridges, cars, or scaffolding.
DO NOT carry objects (such as cell phones) that contain ferromagnetic materials near the aircraft during
calibration.
It is not necessary to calibrate the compass when flying indoors.
Calibration Procedure
Choose an open area to carry out the following procedure.
1. Tap the System Status Bar in DJI GO 4, select “Calibrate”, and follow the on-screen instructions.
2. Hold the aircraft horizontally and rotate it 360 degrees. The Aircraft Status Indicator will turn solid
green.
3. Hold the aircraft vertically, with its nose pointing downward, and rotate it 360 degrees around a
vertical axis.
4. If the Aircraft Status Indicator blinks red, the calibration has failed. Change your location and try
the calibration procedure again.
64 © 2018 DJI All Rights Reserved.