MAVIC 2 PRO/ZOOM User Manual 2019.01 v1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using This Manual 2 Legend 2 Read Before the First Flight 2 Video Tutorials 2 Download the DJI GO 4 App 2 Download DJI Assistant 2 for Mavic 2 Product Profile 6 Introduction 6 Preparing the Mavic 2 Pro/Zoom 6 Preparing the Remote Controller 8 Aircraft Diagram 9 Activation 11 Aircraft 13 Flight Modes 13 Aircraft LEDs and Status Indicator 14 Return to Home 15 Vision Systems and Infrared Sensing Systems 20 Intelligent Flight Modes 23 Advanced Pilot Assistance System
Flight Flight Environment Requirements 55 Flight Limits and GEO Zones 55 Pre-Flight Checklist 57 Auto Takeoff/Landing 57 Starting/Stopping the Motors 58 Test Flight 58 Appendix 4 55 61 Specifications 61 Calibrating the Compass 64 Firmware Updates 65 Remote Controller LCD Screen Menu Information 66 After-Sales Information 67 © 2018 DJI All Rights Reserved.
Product Profile This section introduces Mavic 2 Pro/ Zoom and lists the components of the aircraft and remote controller. © 2018 DJI All Rights Reserved.
Product Profile Introduction The DJI Mavic 2 Pro/Zoom features omnidirectional Vision Systems and Infrared Sensing Systems. Effortlessly capture complex shots using signature DJI technologies such as Obstacle Sensing and Intelligent Flight Modes like Hyperlapse, Point of Interest, ActiveTrackTM 2.0, TapFly, QuickShots, and Advanced Pilot Assistance Systems (APAS).
Mavic 2 Pro/Zoom User Manual *Attach the gimbal cover when not in use. 1) Hold the gimbal in place and insert gimbal clamp between the aircraft and the gimbal. 2) Make sure the hooks on the Gimbal Protector are locked in the grooves of the aircraft, then lower the Gimbal Protector over the gimbal and secure with the buckle. The buckle will click when it is securely attached. Gimbal clamp Grooves Hooks 3. Attaching the propellers. Attach the propellers marked white to the motors with white marks.
Mavic 2 Pro/Zoom User Manual Preparing the Remote Controller 1. Unfold the mobile device clamps and the antennas. 2. Remove the control sticks from their storage slots on the remote controller and screw them into place. 3. Choose an appropriate RC cable based on the type of mobile device. A cable with a Lightning connector is connected by default to the cable slider. Micro USB and USB-C cables are also included in the packaging. Connect the end of the RC cable to your mobile device.
Mavic 2 Pro/Zoom User Manual Aircraft Diagram 1 1. Forward Vision System 2 3 4 2. Propellers 5 3. Motors 6 4. Front LEDs 5. Antennas 6. Gimbal and Camera 7 7. Backward Vision System 8 8. Aircraft Status Indicator 9. Battery Buckles 10. Lateral Vision System 9 11. USB-C Port 10 12. Link Button/Linking Status Indicator 11 12 13. Battery Level LEDs 14. Power Button 15. Intelligent Flight Battery 16. Upward Infrared Sensing System 17. Downward Vision System 13 14 15 18. microSD Card Slot 19.
Mavic 2 Pro/Zoom User Manual 1 12 2 3 11 10 4 5 17 16 15 8 1. Antennas Relay aircraft control and video wireless signals. 2. Return to Home (RTH) Button Press and hold the button to initiate RTH. The aircraft returns to the last recorded Home Point. Press again to cancel RTH. 3. LCD Screen Displays the aircraft and remote controller system status. 4. Removable Control Sticks The removable control sticks are easy to store. The default flight control is set to Mode 2.
Mavic 2 Pro/Zoom User Manual 15. Record Button Press to start recording video. Press again to stop recording. Zoom Adjustment Dial (Mavic 2 Zoom) Turn to adjust the zoom of the Mavic 2 Zoom camera. 16. Focus/Shutter Button Press halfway to autofocus. Press once to take photos according to the mode selected in the DJI GO 4. 18. C2 Button (Customizable) The default configuration is playback. Adjust the configuration in DJI GO 4 based on your preferences. 17.
Aircraft This section introduces the flight controller, Intelligent Flight Battery, and the Forward, Backward and Downward Vision Systems. 12 © 2018 DJI All Rights Reserved.
Aircraft The Mavic 2 Pro/Zoom contains a flight controller, vision systems, video downlink system, propulsion system, and an Intelligent Flight Battery. Refer to the aircraft diagram in the Product Profile section. Flight Modes The Mavic 2 Pro/Zoom has three flight modes, plus a fourth flight mode that the aircraft switches to in certain circumstances: P-mode (Positioning): P-mode works best when the GPS signal is strong.
Mavic 2 Pro/Zoom User Manual Aircraft LEDs and Status Indicator The Mavic 2 Pro/Zoom has Front LEDs and Aircraft Status Indicators as shown in the figure below. Front LEDs Aircraft Status Indicator Front LEDs Aircraft Status Indicator The Front LEDs show the orientation of the aircraft and glow solid red when the aircraft is turned on to indicate the front of the aircraft (they can be turned off in the DJI GO 4).
Mavic 2 Pro/Zoom User Manual Return to Home The Return to Home (RTH) function brings the aircraft back to the last recorded Home Point. There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three scenarios in detail. Description GPS Home Point If a strong GPS signal was acquired before takeoff, the Home Point is the location from which the aircraft launched. The GPS signal strength is indicated by the GPS icon ( ).
Mavic 2 Pro/Zoom User Manual The colored zones and markers on the DJI GO 4 battery level indicator bar reflect the estimated remaining flight time. They automatically adjust according to the aircraft’s current location and status. If the current battery level can only support the aircraft long enough to descend from its current altitude, a critically low battery level warning triggers and the aircraft descends and lands automatically. This cannot be canceled.
Mavic 2 Pro/Zoom User Manual Warning Instructions Aircraft Status DJI GO 4 App Indicator Actions Remaining battery level supports Low Battery Level Emergency Blinks red Aircraft lands. Action Landing (when slowly cannot be canceled. Aircraft lands immediately. in RTH with a normal RC signal). Aircraft lands after 10 seconds Aircraft lands after (when flying 10 seconds. Action normally with Critically Low Battery Level cannot be canceled. a critical low battery level).
Mavic 2 Pro/Zoom User Manual RTH Procedure Smart RTH, Low Battery RTH, and Failsafe RTH all follow the RTH procedure: 1. The aircraft adjusts its orientation. 2. a. If the aircraft is further than 20 m from the Home Point when the RTH procedure begins, it ascends to the pre-set RTH altitude and then flies to the Home Point at a speed of 12 m/s. If the current altitude is higher than the RTH altitude, the aircraft flies to the Home Point at the current altitude.
Mavic 2 Pro/Zoom User Manual The aircraft cannot return to the Home Point if the GPS signal is weak or unavailable. In Smart RTH and Low Battery RTH, the aircraft automatically ascends to an altitude of 65 ft (20 m). Once the altitude is 65 ft (20 m) or higher, move the throttle stick and the aircraft stops ascending and flies to the Home Point at its current altitude. The aircraft cannot avoid obstacles during Failsafe RTH if the Forward and Backward Vision Systems are unavailable.
Mavic 2 Pro/Zoom User Manual Vision Systems and Infrared Sensing Systems The Mavic 2 Pro/Zoom is equipped with Forward, Backward, Downward, and Lateral Vision Systems, and Upward and Downward Infrared Sensing Systems, providing omnidirectional obstacle sensing (if lighting conditions are adequate). The main components of the Forward, Backward, and Downward Vision Systems are six cameras located on the nose, rear side, and the underside of the aircraft.
Mavic 2 Pro/Zoom User Manual Calibrating Vision System Cameras The Vision System cameras installed on the aircraft are factory calibrated. If the aircraft experiences a collision, however, it may require calibration via DJI Assistant 2 for Mavic or DJI GO 4. The most accurate way to calibrate the Vision System cameras is by using DJI Assistant 2 for Mavic. Follow the steps below to calibrate the Forward Vision System cameras, then repeat the steps to calibrate other Vision System cameras.
Mavic 2 Pro/Zoom User Manual Follow the steps below to use the Downward Vision System: T P S 1. Ensure the aircraft is in P-mode and place the aircraft on a flat surface. Please note that the Downward Vision System cannot work properly on surfaces without clear pattern variations. 2. Turn on the aircraft. The aircraft hovers in place after takeoff. The Aircraft Status Indicators flash green twice, which indicates the Downward Vision System is working.
Mavic 2 Pro/Zoom User Manual Keep the sensors clean at all times. DO NOT tamper with the sensors. Do not obstruct the Infrared Sensing System. The Vision System may not be able to recognize patterns on the ground in low light conditions (less than 100 lux). If the aircraft speed exceeds 31 mph (50 kph), the Vision System does not have enough time to brake and stop the aircraft at a safe distance from an obstacle. If the aircraft experiences a collision, camera calibration is required.
Mavic 2 Pro/Zoom User Manual Free The aircraft automatically takes photos and generates a timelapse video. Free mode can be used while the aircraft is on the ground. After takeoff, control the aircraft’s altitude, flight speed, and gimbal angle using the remote controller. Hold the control sticks and accelerate at a steady speed for two seconds and then press the C1 button. The speed is fixed and the aircraft continues to travel at that speed while taking photos.
Mavic 2 Pro/Zoom User Manual For optimal performance, it is recommended to use Hyperlapse at an altitude higher than 50 m and to set a difference of at least two seconds between the interval time and shutter.. It is recommended to select a static subject (e.g., high-rise buildings, mountainous terrain) at a safe distance from the aircraft (further than 15 m). Do not select a subject that is too near the aircraft. The aircraft brakes and hovers in place if an obstacle is detected during Hyperlapse.
Mavic 2 Pro/Zoom User Manual 1. Take off and hover at least 6.6 ft (2 m) above the ground. 2m 2. In DJI GO 4, tap , then select QuickShots and follow the prompts. In flight (GPS) Position 12 61% 09:29 ISO SHUTTER 1600 1/8000 Dronie Circle Helix Rocket EV 0.3 WB Boomerang 4K/25 CAPACITY Asteroid AFC/MF AE Dolly Zoom 3. Select your target subject in Camera View (tap the circle on the subject or drag a box around the subject) and choose a shooting mode. Tap “GO” to begin recording.
Mavic 2 Pro/Zoom User Manual ActiveTrack 2.0 ActiveTrack 2.0 allows you to select an object on your mobile device screen. The aircraft adjusts its flight to track the subject. No external tracking device is required. Mavic 2 Pro/Zoom can automatically identify up to 16 objects and uses different tracking strategies to track people, vehicles, and boats. Using ActiveTrack 2.0 Ensure that the aircraft is in P-mode and that the Intelligent Flight Battery is sufficiently charged.
Mavic 2 Pro/Zoom User Manual ActiveTrack 2.0 includes the following sub-modes: Trace Parallel Spotlight The aircraft tracks the subject at a constant distance. Use the roll stick and tilt stick on the remote controller to change the distance, and use the slider in DJI GO 4 to fly in a circle around the subject. The framing of the subject is adjusted using the left stick and gimbal dial. The aircraft tracks the subject at a constant angle and distance from the front and side.
Mavic 2 Pro/Zoom User Manual Exiting ActiveTrack 2.0 Press the Flight Pause button on the remote controller to brake immediately. Tap on the screen or toggle the Flight Mode switch to S-mode on the remote controller to exit ActiveTrack 2.0. After exiting ActiveTrack 2.0, the aircraft hovers in place, at which point you may choose to fly manually, track another subject, or return to home. Point of Interest 2.0 (POI 2.0) Select a static subject as the Point of Interest.
Mavic 2 Pro/Zoom User Manual Flight Parameter Settings 1. Flight Speed: Flight speed range is 0-10 m/s, the “+” value means the aircraft circles the point counter-clockwise, and the “–” value means the aircraft circles the point clockwise. Adjust the speed by sliding the onscreen slider, and use the roll stick on the remote controller to increase the value. 2. Circle Radius: Adjust the radius by sliding the onscreen slider, and use the tilt stick on the remote controller to increase the value. 3.
Mavic 2 Pro/Zoom User Manual TapFly TapFly features three sub-modes; Forward, Backward, and Free. Providing that lighting conditions are suitable, the aircraft automatically avoids obstacles it senses. Forward: The aircraft flies towards the target with the Forward Vision System sensing obstacles. Backward: The aircraft flies in the opposite direction of the target with the Backward Vision System sensing obstacles. Free: The aircraft flies towards the target.
Mavic 2 Pro/Zoom User Manual DO NOT use TapFly in areas with people, animals, small or fine objects (e.g., tree branches or power lines), or transparent objects (e.g., water or glass). TapFly may not work properly when the aircraft is flying over water or snow-covered areas. There may be deviations between expected and actual flight paths selected in TapFly. The selectable range for the target direction is limited. You cannot make a selection close to the upper or lower edges of the screen.
Mavic 2 Pro/Zoom User Manual Attaching and Detaching the Propellers The Mavic 2 Pro/Zoom use low-noise propellers. There are two varieties of the propellers, which are designed to spin in different directions. White marks are used to indicate which propellers should be attached to which motors. Marked Attach on motors with white marks Unmarked Attach on motors without white marks Turn the propellers in the indicated direction to mount and tighten.
Mavic 2 Pro/Zoom User Manual Intelligent Flight Battery The Mavic 2 Intelligent Flight Battery is a 15.4 V, 3850 mAh battery with smart charging/discharging functionality. Only use a DJI approved AC power adapter to charge the battery. Intelligent Flight Battery AC Power Adapter Battery Features 1. Battery Level Display: The LED indicators display the current battery level. 2.
Mavic 2 Pro/Zoom User Manual Checking Battery Level The battery level LEDs display how much charge remains. If the battery is turned off, press the Power button, and the battery level LEDs light up to display the current battery level Powering On/Off Press the Power button once, then press again, and hold for two seconds to turn the battery on or off. Low Temperature Notice 1. Battery capacity is significantly reduced when flying in low-temperature environments of 14° to 41° F (-10° to 5° C).
Mavic 2 Pro/Zoom User Manual Battery Level LEDs During Charging LED 1 LED 2 LED 3 LED 4 0%~25% 25%~50% 50%~75% Fully Charged Battery Level LEDs During Charging Battery Level Battery Protection Battery Protection Mechanisms LED 1 LED 2 LED 3 LED 4 Blinking Pattern Battery Protection Item LED 2 blinks twice per second Overcurrent detected LED 2 blinks three times per second Short circuit detected LED 3 blinks twice per second Overcharge detected LED 3 blinks three times per second Over-
Mavic 2 Pro/Zoom User Manual Gimbal and Camera Gimbal The Mavic 2 Pro/Zoom 3-axis gimbal provides stabilization for the camera, allowing you to capture clear and stable images and video. The gimbal has a tilt range of -90˚ to +30˚. Gimbal settings such as Gimbal Mode and Gimbal Auto Calibration can be selected by tapping . Use the gimbal dial on the remote controller to control the camera’s tilt. Alternatively, enter Camera View in DJI GO 4.
Mavic 2 Pro/Zoom User Manual Ensure the temperature and humidity is suitable for the camera during usage and storage. Use a lens cleanser to clean the lens to avoid damage. DO NOT block any ventilation holes on the camera as the heat generated may damage the device and hurt the user. Storing the Photos and Videos The Mavic 2 Pro/Zoom comes with 8 GB of internal storage and also supports the use of a microSD card to store your photos and videos.
Mavic 2 Pro/Zoom User Manual Video Distortion Correction The Mavic 2 Pro and Mavic 2 Zoom shoot 8-bit videos while automatically correcting the video distortion commonly found in the medium. Only the Mavic 2 Pro, however, can shoot 10-bit videos. 10-bit videos are smoother than 8-bit videos, which is advantageous for post-production color modulation. Please note that automatic video distortion correction is unavailable for 10-bit videos on the Mavic 2 Pro.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. 40 © 2018 DJI All Rights Reserved.
Remote Controller Built into the remote controller is DJI’s long-range transmission technology OcuSync 2.0, offering a maximum transmission range of 5 mi (8 km) and displaying video from the aircraft to DJI GO 4 on your mobile device at up to 1080p. Easily control the aircraft and camera using the onboard buttons. An onboard LCD screen gives real-time aircraft data information and the detachable control sticks make the remote controller easier to store.
Mavic 2 Pro/Zoom User Manual Charging the Battery Connect the provided AC power adapter to the power port on the remote controller. It takes approximately 2 hours and 15 minutes to charge the remote controller battery fully. Remove the RC cable from the remote controller before charging. Power Outlet AC Power Adapter USB Adapter Controlling the Camera Use the Aperture/Shutter Adjustment Dial to adjust the aperture and shutter parameters (Mavic 2 Pro only). Use the Record button to start/stop recording.
Mavic 2 Pro/Zoom User Manual Controlling the Aircraft The control sticks control the aircraft’s orientation (yaw), forward/ backward movement (pitch), altitude (throttle), and left/right movement (roll). The control stick mode determines the function of each control stick movement. Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can be configured in DJI GO 4. The default mode is Mode 2.
Mavic 2 Pro/Zoom User Manual Remote Controller (Mode 2) ( Aircraft Remarks Indicates Nose Direction) Moving the left stick up or down changes the aircraft’s altitude. Push the stick up to ascend and down to descend. The more the stick is pushed away from the center position, the faster the aircraft will change altitude. Always push the stick gently to prevent sudden and unexpected changes in altitude. Moving the left stick to the left or right controls the orientation of the aircraft.
Mavic 2 Pro/Zoom User Manual Flight Mode Switch Toggle the switch to select the desired flight mode. Position Flight Mode S S-mode P P-mode T T-mode T P S Regardless of which position the switch is in on the remote controller, the Mavic 2 Pro/Zoom begins in P-mode by default. To switch flight modes, first go to Camera View in DJI GO 4, tap and enable “Multiple Flight Modes”. After enabling multiple flight modes, toggle the switch to P and then to S or T to switch flight modes.
Mavic 2 Pro/Zoom User Manual strong weak Ensure that the aircraft is flying within the optimal transmission zone. To maintain optimal transmission performance, adjust the remote controller and antennas according to the figure above. LCD Screen The LCD Screen displays various system statuses including real-time flight telemetry and battery levels. Refer to the figure below for the meaning of each icon on the LCD Screen.
Mavic 2 Pro/Zoom User Manual Linking the Remote Controller The remote controller is linked to your aircraft before delivery. Linking is only required when using a new remote controller for the first time. Follow these steps to link a new remote controller: 1. Power on the aircraft and the remote controller. 2. Launch DJI GO 4. 3. Enter “Camera” and tap on and then tap the button to confirm. The remote controller is ready to link. 4.
DJI GO 4 App This section introduces the main functions of the DJI GO 4 app. 48 © 2018 DJI All Rights Reserved.
DJI GO 4 App Use this app to control the gimbal, camera, and other aircraft functions. The app features Equipment, Editor, SkyPixel, and Me sections, which are used for configuring your aircraft, and editing and sharing your photos and videos with others. Equipment Device Menu If it is not already selected, select Mavic 2 Pro/Zoom from the device menu in the top left corner of the screen. Function Menu Tap in the top right corner of the screen to open the Function menu.
Mavic 2 Pro/Zoom User Manual 3. Battery Level Indicator Bar : The battery level indicator provides a dynamic display of the battery level. The colored zones on the battery level indicator represent the power levels needed to carry out different functions. 4. Flight Mode : The text next to this icon indicates the current flight mode. Tap to configure the Flight Controller settings. These settings allow you to modify flight limits and set gain values. 5.
Mavic 2 Pro/Zoom User Manual 11. Focus/Metering Button / : Tap to switch between focus and metering mode. Tap to select object for focusing or metering. Auto Focus-Continuous will be triggered automatically according to the status of the aircraft and camera after enabling Auto Focus. 12. General Settings : : Tap to enter the General Settings menu to set units of measurement, enable/disable livestream, and adjust flight route display settings. 13. Auto Exposure Lock AE : Tap to lock the exposure value.
Mavic 2 Pro/Zoom User Manual 21. Advanced Pilot Assistance Systems : Tap to enable/disable the APAS feature. The APAS feature is disabled if the Forward and Backward Vision Systems are disabled or unavailable. APAS 22. Intelligent Flight Modes : Tap to select Intelligent Flight Modes. 23. Smart RTH : Tap to initiate Smart RTH and have the aircraft return to the last recorded Home Point. 24. Auto Takeoff/Landing / : Tap to initiate auto takeoff or landing. 25. Back : Tap to return to the main menu.
Mavic 2 Pro/Zoom User Manual Be sure to fully charge your mobile device before launching DJI GO 4. Mobile cellular data is required when using DJI GO 4. Please contact your wireless carrier for data charges. If you are using a phone as your mobile display device, DO NOT accept phone calls or use the texting features during flight. Read all safety tips, warning messages, and disclaimers carefully. Be familiar with the related regulations in your area.
Flight This section describes safe flight practices and flight restrictions. 54 © 2018 DJI All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended to use the flight simulator in DJI GO 4 to hone your flight skills and practice flying safely. Ensure that all flights are carried out in an open area. Refer to the Remote Controller and DJI GO 4 sections for information about using the remote controller and the app to control the aircraft. Flight Environment Requirements 1. Do not use the aircraft in severe weather conditions including wind speeds exceeding 10 m/s, snow, rain, and fog. 2.
Mavic 2 Pro/Zoom User Manual GPS Signal Strong Blinking Green Flight Limits DJI GO 4 App Aircraft Status Indicator Max Altitude Aircraft's altitude cannot exceed the specified value. Warning: Height limit reached. N/A Max Distance Flight distance must be within the max radius. Warning: Distance limit reached.
Mavic 2 Pro/Zoom User Manual Pre-Flight Checklist 1. 2. 3. 4. 5. 6. 7. 8. Ensure the remote control device, mobile device, and Intelligent Flight Battery are fully charged. Ensure the Intelligent Flight Battery and the propellers are mounted securely. Ensure the aircraft arms and propellers are unfolded. Ensure the gimbal and camera are functioning normally. Ensure that there is nothing obstructing the motors and that they are functioning normally.
Mavic 2 Pro/Zoom User Manual Starting/Stopping the Motors Starting the Motors A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the inner or outer bottom corners to start the motors. Once the motors have started spinning, release both sticks simultaneously. OR Stopping the Motors There are two methods to stop the motors: Method 1: When the aircraft has landed, push and hold the left stick down. The motors stop after three seconds.
Mavic 2 Pro/Zoom User Manual Video Suggestions and Tips 1. The pre-flight checklist is designed to help you fly safely and to ensure that you can shoot video during flight. Go through the full pre-flight checklist before each flight. 2. Select the desired gimbal operation mode in DJI GO 4. 3. Only shoot video when flying in P-mode or T-mode. 4. DO NOT fly in bad weather conditions such as when it is raining or windy. 5. Choose the camera settings that best suit your needs.
Appendix 60 © 2018 DJI All Rights Reserved.
Appendix Specifications Aircraft Takeoff Weight 907 g (Mavic 2 Pro); 905 g (Mavic 2 Zoom) Dimensions Folded: 214×91×84 mm (length×width×height) Unfolded: 322×242×84 mm (length×width×height) Diagonal Distance 354 mm Max Ascent Speed 5 m/s (S-mode), 4 m/s (P-mode) Max Descent Speed 3 m/s (S-mode), 3 m/s (P-mode) Max Speed 72 km/h (S-mode) (near sea level, no wind) Max Service Ceiling Above Sea Level 6000 m Max Flight Time 31 minutes (at a consistent 25 kph, no wind) Max Hovering Time 29 minut
Mavic 2 Pro/Zoom User Manual Sensing System Sensing System Omnidirectional Obstacle Sensing FOV Forward: Horizontal: 40°, Vertical: 70° Backward:Horizontal: 60°, Vertical: 77° Downward: Front and Back: 100°, Left and Right: 83° Lateral: Horizontal: 80°, Vertical: 65° Obstacle Sensing Range Forward: Precision Measurement Range: 0.5 - 20 m Detectable Range: 20 - 40 m Effective Sensing Speed: ≤ 14 m/s Backward: Precision Measurement Range: 0.
Mavic 2 Pro/Zoom User Manual Color Mode Dlog-M (10-bit), support HDR video (HLG 10-bit) D-Cinelike Max Video Bitrate 100 Mbps 100 Mbps Supported File System FAT32: ≤ 32 GB exFAT: > 32 GB FAT32: ≤ 32 GB exFAT: > 32 GB Photo Format JPEG / DNG (RAW) JPEG / DNG (RAW) Video Format MP4 / MOV (MPEG-4 AVC/H.264, HEVC/H.265) MP4 / MOV (MPEG-4 AVC/H.264, HEVC/H.
Mavic 2 Pro/Zoom User Manual Intelligent Flight Battery Capacity 3850 mAh Voltage 15.4 V Max Charging Voltage 17.6 V Battery Type LiPo 4S Energy 59.29 Wh Net Weight 297 g Charging Temperature Range 5℃ - 40℃ Max Charging Power 80 W APP Video Transmission System OcuSync 2.
Mavic 2 Pro/Zoom User Manual Horizontal Calibration Vertical Calibration The aircraft can take off immediately once calibration is complete. If you wait more than three minutes to take off after calibration, you may need to calibrate again. It is possible that another compass interference warning will appear while the aircraft is on the ground. This indicates that the current location is not suitable for flying the aircraft, due to the level of magnetic interference.
Mavic 2 Pro/Zoom User Manual Ensure the aircraft is connected to the computer before powering on. The firmware update will take around 15 minutes. It is normal that the gimbal goes limp, aircraft status indicators blink, and the aircraft reboots. Please wait patiently until the update is complete. Ensure the computer has access to the Internet. Before performing an update ensure the Intelligent Flight Battery has at least 50% power and the remote controller has at least 30% power.
Mavic 2 Pro/Zoom User Manual GOING HOME MAX ALT.
DJI Support http://www.dji.com/support This content is subject to change. Download the latest version from http://www.dji.com/mavic-2 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. MAVIC is a trademark of DJI. Copyright © 2018 DJI All Rights Reserved.
