User Manual

Hyperlapse
Hyperlapse shooting modes include Free, Circle, Course Lock, and Waypoint.
Free
The aircraft automatically takes photos and generates a timelapse video. Free mode can be used
while the aircraft is on the ground. After takeoff, control the aircraft’s movements and gimbal angle
using the remote controller. Follow the steps below to use Free:
1. Set the interval time, video duration, and max speed. The screen displays the number of
photos that will be taken and how long the shooting time will be.
2. Tap the shutter/record button to begin.
Cruise Control: Set the function of the Customizable button to Cruise Control and press the
Customizable button and control stick at the same time to enter Cruise Control. The aircraft will
continue to fly at the same speed.
Circle
The aircraft automatically takes photos while flying around the selected subject to generate a
timelapse video. Follow the steps below to use Circle:
1. Set the interval time, video duration, and max speed. Circle can be selected to travel in either a
clockwise or counter-clockwise direction. The screen displays the number of photos that will be
taken and how long the shooting time will be.
2. Select a subject on the screen.
3. Tap the shutter/record button to begin.
4. Move the pan stick and gimbal dial to adjust the frame, move the tilt stick to alter the distance
from the subject, move the roll stick to control the circled speed, and move the throttle stick to
control the vertical flight speed.
Course Lock
Course Lock can be used in two ways. In the first way, the orientation of the aircraft is fixed, but a
subject cannot be selected. In the second way, the orientation of the aircraft is fixed and the aircraft