User Manual

Customizable Button
Go to DJI Fly System Settings, and then select Control to customize the function for this button.
Functions include recentering the gimbal, switching the auxiliary LED, and toggling the map and
live view.
Remote Controller Alert
The remote controller sounds an alert during RTH or when the battery level is low (6% to 15%).
The low battery alert level can be cancelled by pressing the power button. The critical battery level
alert (less than 5%), however, cannot be cancelled.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the antennas are
positioned in relation to the aircraft as depicted below.
Linking the Remote Controller
The remote controller is linked to the aircraft before delivery. Linking is only required when using
a new remote controller for the first time. Follow these steps to link a new remote controller:
1. Power on the remote controller and the aircraft.
2. Launch DJI Fly.
3. In camera view, tap and select Control and Pair to Aircraft (Link).
4. Press and hold the power button of the aircraft for more than four seconds. The aircraft beeps
once indicating it is ready to link. The aircraft beeps twice indicating linking is successful. The
battery level LEDs of the remote controller will glow solid.