User Manual

Starting/Stopping the Motors
Stopping the Motors Mid-Flight
Stopping motors mid-flight will cause the aircraft to crash. The motors should only be stopped mid-
flight in an emergency situation such as if a collision has occurred or if the aircraft is out of control
and is ascending or descending very quickly, rolling in the air, or if a motor has stalled. To stop the
motors mid-flight use the same CSC that was used to start the motors. The default setting can be
changed in DJI Fly.
Stopping the motors mid-flight will cause the aircraft to crash.
Flight Test
Takeoff/Landing Procedures
1. Place the aircraft in an open, flat area with the aircraft status indicator facing towards you.
2. Turn on the aircraft and the remote controller.
3. Launch DJI Fly and enter the camera view.
4. Wait until the aircraft status indicators blink green indicating that the Home Point has been
recorded and it is now safe to fly.
5. Gently push the throttle stick to take off or use auto-takeoff.
6. Pull the throttle stick or use auto-landing to land the aircraft.