User Manual

Preparing the Aircraft
All aircraft arms are folded before the aircraft is packaged. Follow the steps below to unfold the
aircraft.
1. Remove the gimbal protector from the camera.
2. Unfold the front arms, and then unfold the rear arms.
Attach the gimbal protector when not in use.
3. Attach the propellers marked to the motors with marks. Press the propeller down onto the
motors and turn until it is secure. Attach the other propellers to the unmarked motors. Unfold
all the propeller blades.
4. All Intelligent Flight Batteries are in hibernation mode before shipment to ensure safety. Use
the provided charger to charge and activate the Intelligent Flight Batteries for the first time. It
takes approximately 1 hour and 35 min to fully charge an Intelligent Flight Battery.