User Manual

Unfold the front arms before unfolding the rear arms.
Make sure the gimbal protector is removed and all arms are unfolded before powering
on the aircraft. Otherwise, it may affect the aircraft self-diagnostics.
Preparing the Remote Controller
1. Remove the control sticks from their storage slots on the remote controller and screw them
into place.
2. Pull out the mobile device holder. Choose an appropriate remote controller cable based on
the type of mobile device. A Lightning connector cable, Micro USB cable, and USB-C cable are
included in the packaging. Connect the end of the cable with the phone logo to your mobile
device. Make sure the mobile device is secured.
If a USB connection prompt appears when using an Android mobile device, select the
option to charge only. Otherwise, it may result in connection failure.