DJI RC Pro User Manual v1.0 2021.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this Manual 2 Read Before the First Use 2 Video Tutorials 2 Product Profile 4 Introduction 4 DJI RC Pro 5 Preparing the Remote Controller 7 Charging the Battery 7 Mounting 7 Activating the Remote Controller 7 Remote Controller Operations 9 Checking the Battery Level 9 Powering On/Off 9 Linking the Remote Controller 9 Controlling the Aircraft 10 Controlling the Camera 13 Controlling the Gimbal 13 Customizable Buttons 13 Status LED and Battery Level LEDs Desc
Product Profile Introduction The DJI RC Pro remote controller features O3+, the latest version of DJI’s signature OCUSYNCTM image transmission technology, and can transmit a live HD view from the camera of an aircraft at a distance of up to 15 km [1]. The remote controller also supports dual transmission, making the HD video downlink stable and reliable. The remote controller has a maximum operating time of 3 hours [2]. High-Bright Screen: The built-in 5.
DJI RC Pro User Manual DJI RC Pro 1 2 3 4 5 8 6 9 7 14 19 15 18 16 17 10 11 12 13 1. Antennas Relay aircraft control and video wireless signals. 2. Back Button Press once to return to the previous screen. Press twice to return to the home screen. 3. Control Sticks Use the control sticks to control the aircraft movements. Set the flight control mode in DJI Fly. The control sticks are removable and easy to store. 4. Return to Home (RTH) Button Press and hold to initiate RTH.
DJI RC Pro User Manual 20 21 24 23 22 25 20. Air Vent Used for heat dissipation. Do not block the air vent during usage. 21. Control Sticks Storage Slot For storing the control sticks. 22. Customizable C1 Button Switch between recentering the gimbal and pointing the gimbal downward. The function can be set in DJI Fly. 23. Speaker Outputs sound. 24. Customizable C2 Button Press once to turn the Auxiliary Bottom Light on or off. The function can be set in DJI Fly. 25. Air Intake Used for heat dissipation.
Preparing the Remote Controller Charging the Battery The built-in battery is placed in hibernation mode before delivery. It must be charged before using for the first time. It takes approximately two hours to fully charge the remote controller using a recommended USB charger rated 12V and one and a half hours using a recommended USB charger rated 15V. USB-C Cable Power Outlet 100~240 V USB Charger It is recommended to use an FCC/CE certified USB charger rated 12V or 15V.
DJI RC Pro User Manual 3. Log in with your DJI account. If you do not have an account, create a DJI account and log in. 4. Tap “Activate” on the activation page. 5. After activating, select if you would like to join the improvement project. The project helps to improve the user experience by sending diagnostic and usage data automatically every day. No personal data will be collected by DJI. Check the internet connection if the activation fails.
Remote Controller Operations Checking the Battery Level Press the power button once to check the current battery level. Low Battery High Powering On/Off Press and then press again and hold to power the remote controller on or off. Linking the Remote Controller The aircraft and remote controller must be linked before use. Follow these steps to link a new remote controller. Method 1: 1. Power on the remote controller and the aircraft. 2.
DJI RC Pro User Manual Controlling the Aircraft Control Mode The control sticks control the aircraft’s orientation (pan), forward/backward movement (pitch), altitude (throttle), and left/right movement (roll). The control stick mode determines the function of each control stick movement. Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can be configured in DJI Fly. The default mode is Mode 2.
DJI RC Pro User Manual Center position: control sticks are centered. Moving the control stick: control sticks are pushed away from the center. The figure below explains how to use each control stick. Mode 2 has been used as an example. Remote Controller (Mode 2) ( Aircraft Indicates Nose Direction) Left Stick Moving the left stick up or down changes the aircraft’s altitude. Push the stick up to ascend and down to descend.
DJI RC Pro User Manual Normal Mode: The aircraft utilizes GNSS and the Vision Systems and Infrared Sensing System to locate and stabilize itself. When the GNSS signal is strong, the aircraft uses GNSS to locate and stabilize itself. When the GNSS is weak but the lighting and other environment conditions are sufficient, the aircraft uses the vision systems to locate and stabilize itself.
DJI RC Pro User Manual Controlling the Camera The remote controller can be used to control the camera. 3 1 2 1. Focus/Shutter Button Press halfway down to auto focus and press all the way down to take a photo. The photo mode can be set in DJI Fly. 2. Record Button Press once to start or stop recording. 3. Camera Control Dial Use to adjust the zoom. Controlling the Gimbal The remote controller can be used to control the gimbal. 1. Gimbal Dial Use to adjust the tilt of the gimbal.
DJI RC Pro User Manual Status LED and Battery Level LEDs Description 1 2 1. Status LED The status LED displays the linking status and warnings for control stick, low battery level, and high temperature.
Touchscreen Home Screen 1 2 3 DJI Fly Gallery 4 5 6 7 8 Firefox Setting Guide 9 4:53 Files 1. Time Displays local time. 2. DJI Fly Tap to enter DJI Fly. 3. Gallery Tap to check stored images and videos. 4. Files Tap to check stored files. 5. Browser Tap to open the browser. 6. Setting Tap to enter system settings. 7. Guide Tap to read the guide and quickly learn about the remote controller buttons and LEDs. 8. Wi-Fi Signal Displays the Wi-Fi signal status when connected to Wi-Fi.
DJI RC Pro User Manual Operations 16 Slide from the left or right to the center of the screen to return to the previous screen. Slide up from the bottom of the screen to return to the home screen. Slide up and right from the bottom of the home screen to access recently opened apps when on the home screen. Slide up from the bottom of the screen to access the recently opened apps when not on the home screen. © 2021 DJI All Rights Reserved.
DJI RC Pro User Manual Shortcut Settings 2 1 10:12 Notifications DJI Fly 3 4 Sat, Mar 30 11m ago Expore skypixel.com One billion colors captured by the 10-bit DlogM color profile. Wi-Fi Bluetooth Screenshot Mobile Do not distube Record Screen 5 Airplane 6 7 1. Notifications Tap to check system notifications. 2. Recent Tap to check recently opened apps. 3. Home Tap to return to the home screen. 4. System Settings Tap to access system settings. 5. Shortcuts : Tap to enable or disable Wi-Fi.
DJI RC Pro User Manual Combination Buttons Some frequently-used features can be activated by using combination buttons. To use combination buttons, hold the back button and press the additional button. Checking Available Combination Buttons Power on the remote controller, enter the home screen, and tap Guide to check combination buttons. Using Combination Buttons The functions of the combination buttons cannot be changed. The following table displays the function of each combination button.
Advanced Feature Calibrating the Compass The compass may need to be calibrated after the remote controller is used in areas with electromagnetic interference. A warning prompt will appear if the compass of the remote controller requires calibration. Tap the warning prompt to start calibrating. In other cases, follow the steps below to calibrate your remote controller. 1. Enter the home screen. 2. Select Settings, scroll down, and tap Compass. 3.
Appendix Specification O3+ Operation Frequency Range 2.400-2.4835 GHz; 5.725-5.850 GHz* Max Transmission Distance (Unobstructed, free of interference) 15 km (FCC); 8 km (CE/SRRC/MIC) Transmission Power (EIRP) 2.4 GHz: <33 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5.8 GHz: <33 dBm (FCC); <14 dBm (CE); <23 dBm (SRRC) Wi-Fi Protocol 802.11b/a/g/n/ac/ax 2×2 MIMO Operation Frequency Range 2.400-2.4835 GHz; 5.725-5.850 GHz* Transmission Power (EIRP) 2.4 GHz: <26 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5.
DJI Support http://www.dji.com/support This content is subject to change. Download the latest version from https://www.dji.com/rc-pro/downloads If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. DJI is a trademark of DJI. Copyright © 2021 DJI All Rights Reserved.
DJI RC Pro Quick Start Guide v1.
Disclaimer Carefully read this entire document and all safe and lawful practices provided by DJITM before using this product for the first time. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity.
Introduction The DJI RC Pro remote controller features O3+, the latest version of DJI’s signature OCUSYNCTM image transmission technology, and can transmit a live HD view from the camera of an aircraft [1] at a distance of up to 15 km[2]. Users can connect to the internet via Wi-Fi and the Android operating system comes with a variety of functions such as Bluetooth and GNSS. The built-in 5.
2. The remote controller will sound an alert if it is powered on but has not been used for five minutes. It will automatically power off after a further 30 seconds. Move the control sticks or perform any other remote controller action to cancel the alert. 3. Make sure the antennas of the remote controller are unfolded and adjusted to the proper position for optimal transmission. 4. Contact DJI Support to repair or replace the antennas if they are damaged. Damaged antennas greatly decrease performance. 5.
Overview 1. Antennas 2. Back Button/Function Button 3. Control Sticks 1 2 3 4 5 8 6 10 11 12 13 7 9 4. RTH Button 5. Flight Pause Button 6. Flight Mode Switch 7. 5D Button 8. Power Button 9. Confirm Button/Customizable C3 Button 10. Touchscreen 11. microSD Card Slot 12. USB-C Port 13.
14 19 15 18 16 17 14. Gimbal Dial 15. Record Button 16. Status LED 17. Battery Level LEDs 18. Focus/Shutter Button 19. Camera Settings Dial 20. Air Vent 21. Control Sticks Storage Slots [1] 20 24 25 21 22. Customizable C1 Button 23 22 24. Customizable C2 Button 23. Speaker 25. Air Intake [1] A pair of control sticks are stored in the control sticks storage slot before delivery. The control sticks have already been mounted to the remote controller in the illustration in the Overview section.
1. Charging and Checking Battery Level The built-in battery is placed in hibernation mode before delivery. It must be charged before using for the first time. Check battery level: press power button. Power on/off: press, then press and hold. It takes approximately two hours to fully charge the remote controller using a recommended USB charger rated 12V and one and a half hours using a recommended USB charger rated 15V.
2. Preparing the Remote Controller Remove the control sticks from the storage slots Attach the control sticks and twist to secure The optimal transmission range is where the antennas are facing toward the aircraft and the angle between the antennas and the back of the remote controller is 180° or 270°. The illustrations show situations where the operator and aircraft are far away. Unfold the antennas • Make sure the control sticks are firmly mounted.
3. Activating the Remote Controller Internet The remote controller needs to be activated before using for the first time. An internet connection is required for activation. Power on the remote controller Hello Hello Hello Welcome Welcome Welcome Next Next Next Start Start Start Select the language Follow the prompts to activate Check the internet connection if activation fails. Try to activate the remote controller again if the internet connection is normal.
4. Linking The remote controller is already linked to the aircraft when it is purchased together as part of a combo. Otherwise, follow the steps below to link the remote controller and the aircraft after activation. 1. Power on the remote controller and the aircraft. 2. Press the customizable C1 button, customizable C2 button, and the record button simultaneously. The status LED will blink blue and the remote controller will beep twice to indicate linking has started. 3.
5. Flight Before takeoff, make sure that takeoff is permitted in the camera view of DJI Fly. • Auto Takeoff/Landing ／ Tap this icon in the camera view. When the prompt appears, press and hold the button to initiate auto takeoff or landing. • Manual Takeoff/Landing Perform combination stick command to start/stop the motors. OR Takeoff Slowly push the left control stick (Mode 2) up to take off. Landing Slowly push the left control stick down until the aircraft lands.
The default control stick mode is Mode 2. The left control stick controls the altitude and heading of the aircraft, while the right control stick controls the forward, backward, and sideward movements. Left Stick Right Stick Up Forward Down Turn Left Backward Turn Right Left Right • The motors can only be stopped mid-flight when the flight controller detects a critical error. • Make sure the remote controller is linked to the aircraft.
Specifications O3+ Operation Frequency Range Max Transmission Distance (Unobstructed, free of interference) Transmission Power (EIRP) Wi-Fi Protocol Operation Frequency Range Transmission Power (EIRP) Bluetooth Protocol Operation Frequency Range Transmission Power (EIRP) General Battery 2.400-2.4835 GHz; 5.725-5.850 GHz* 15 km (FCC); 8 km (CE/SRRC/MIC) 2.4 GHz: <33 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5.8 GHz: <33 dBm (FCC); <14 dBm (CE); <23 dBm (SRRC) 802.11b/a/g/n/ac/ax 2×2 MIMO 2.400-2.4835 GHz; 5.725-5.
Charging Type Rated Power Storage Capacity Charging Time Operating Time Video Output Port Operation Temperature Range Storage Temperature Range Charging Temperature Range Supported Aircraft Models** GNSS Weight Model Recommended to use USB chargers rated 12V or 15V 12 W ROM 32GB + expandable storage via microSD card 2 hours (using a USB charger rated 12V) 1.
