User Manual v1.2 2021.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing. Revision Log 2 Version Date Revisions v1.2 2021.12 Added Intelligent Flight Mode section.
Using this Manual Legend Warning Important Hints and Tips Reference Read Before the First Flight Read the following documents before using the DJITM MAVICTM 3: 1. Safety Guidelines 2. Quick Start Guide 3. User Manual It is recommended to watch all tutorial videos on the official DJI website and read safety guidelines before using for the first time. Prepare for your first flight by reviewing the quick start guide and refer to this user manual for more information.
Contents Using this Manual Legend 2 Read Before the First Flight 2 Video Tutorials 2 Download the DJI Fly App 2 Download DJI Assistant 2 (Consumer Drones Series) 2 Product Profile 6 Introduction 6 Using for the First Time 7 Diagram 9 Aircraft 14 Flight Modes 14 Aircraft Status Indicators 15 Return to Home 16 Vision Systems and Infrared Sensing System 20 Intelligent Flight Mode 22 Advanced Pilot Assistance Systems (APAS 5.
Flight Flight Environment Requirements 57 Flight Limits and GEO Zones 57 Pre-Flight Checklist 58 Auto Takeoff/Landing 59 Starting/Stopping the Motors 59 Flight Test 60 Appendix 4 57 62 Specifications 62 Firmware Update 67 After-Sales Information 67 © 2021 DJI All Rights Reserved.
Product Profile This section introduces DJI Mavic 3 and lists the components of the aircraft and remote controller. 5 © 2021 DJI All Rights Reserved.
Product Profile Introduction DJI Mavic 3 features both an Infrared Sensing System and Forward, Backward, Upward, Lateral, and Downward Vision Systems, allowing for hovering and flying indoors as well as outdoors and for automatic Return to Home while avoiding obstacles in all directions. The aircraft has a maximum flight speed of 47 mph (75.6 kph) and a maximum flight time of 46 minutes. The DJI RC Pro remote controller has a built-in 5.
DJI Mavic 3 User Manual Using for the First Time DJI Mavic 3 is folded before being packaged. Follow the steps below to unfold the aircraft and remote controller. Preparing the Aircraft 1. Remove the storage cover. 1 2 2. All Intelligent Flight Batteries are in hibernation mode before delivery to ensure safety. Use the provided charger to charge and activate the Intelligent Flight Batteries for the first time. It takes approximately 1 hour and 36 minutes to fully charge an Intelligent Flight Battery.
DJI Mavic 3 User Manual Preparing the Remote Controller Follow the steps below to prepare to use the DJI RC Pro remote controller. 1. Use the provided charger to charge the remote controller via the USB-C port to active the battery. 2. Remove the control sticks from the storage slots on the remote controller and screw them into place. 3. Unfold the antennas. 4. The remote controller needs to be activated before using for the first time and an internet connection is required for activation.
DJI Mavic 3 User Manual Activating DJI Mavic 3 Aircraft DJI Mavic 3 requires activation before using for the first time. After powering on the aircraft and remote controller, follow the on-screen prompts to activate DJI Mavic 3 using DJI Fly. An internet connection is required for activation. Binding the Aircraft and Remote Controller It is recommended to bind the aircraft and remote controller to help ensure the best possible after-sales service.
DJI Mavic 3 User Manual DJI RC Pro 1 2 3 4 5 8 6 9 7 14 19 15 18 16 17 10 11 12 13 1. Antennas Relay aircraft control and video wireless signals. 9. Confirm Button Press once to confirm a selection. The button does not have a function when using DJI Fly. 2. Back Button Press once to return to the previous screen. Press twice to return to the home screen. 10. Touchscreen Touch the screen to operate the remote controller. Note that the touchscreen is not waterproof. Operate with caution. 3.
DJI Mavic 3 User Manual 21. Control Sticks Storage Slot For storing the control sticks. 20 22. Customizable C1 Button Switch between recentering the gimbal and pointing the gimbal downward. The function can be set in DJI Fly. 21 24 23 22 23. Speaker Outputs sound. 25 24. Customizable C2 Button Press once to turn the Auxiliary Bottom Light on or off. The function can be set in DJI Fly. 20. Air Vent Used for heat dissipation. Do not block the air vent during usage. 25.
DJI Mavic 3 User Manual 7. Photo/Video Toggle Press once to switch between photo and video mode. 8. Remote Controller Cable Connect to a mobile device for video linking via the remote controller cable. Select the cable according to the mobile device. 9. Mobile Device Holder Used to securely mount the mobile device to the remote controller. 10. Antennas Relay aircraft control and video wireless signals. 11. USB-C Port For charging and connecting the remote controller to the computer.
Aircraft DJI Mavic 3 contains a flight controller, video downlink system, vision systems, infrared sensing system, propulsion system, and an Intelligent Flight Battery. 13 © 2021 DJI All Rights Reserved.
Aircraft DJI Mavic 3 contains a flight controller, video downlink system, vision systems, infrared sensing system, propulsion system, and an Intelligent Flight Battery. Flight Modes DJI Mavic 3 has three flight modes, plus a fourth flight mode that the aircraft switches to in certain scenarios. Flight modes can be switched via the Flight Mode switch on the remote controller.
DJI Mavic 3 User Manual Aircraft Status Indicators DJI Mavic 3 has front LEDs and aircraft status indicators. Front LED Front LED Aircraft Status Indicator Aircraft Status Indicator When the aircraft is powered on but the motors are not running, the front LEDs glow solid red to display the orientation of the aircraft. When the aircraft is powered on but the motors are not running, the aircraft status indicators display the status of the flight control system.
DJI Mavic 3 User Manual Return to Home Return to Home (RTH) returns the aircraft to the last recorded Home Point when the positioning system is functioning normally. There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. The aircraft automatically flies back to the Home Point and lands when Smart RTH is initiated, the aircraft enters Low Battery RTH, or the video link signal is lost during flight.
DJI Mavic 3 User Manual During Advanced RTH, the aircraft will ignore the preset RTH altitude in DJI Fly and instead will automatically adjust the flight speed and altitude according the environment (wind speed and direction, obstacles, transmission signals). Advanced RTH will not be available if the lighting condition and environment were not suitable for vision systems during takeoff or RTH.
DJI Mavic 3 User Manual and flight speed. A warning prompt will appear in DJI Fly when the battery level is low and the aircraft can only support Low Battery RTH. The user can cancel RTH by pressing the RTH button on the remote controller. If RTH is cancelled following a low battery level warning, the Intelligent Flight Battery may not have enough power for the aircraft to land safely, which may lead to the aircraft crashing or being lost.
DJI Mavic 3 User Manual Landing Protection Landing Protection will activate during Smart RTH. When aircraft begins landing, Landing Protection is enabled. 1. During Landing Protection, the aircraft will automatically detect and carefully land on suitable ground. 2. If the ground is determined unsuitable for landing, the aircraft will hover and wait for pilot confirmation. 3. If Landing Protection is not operational, DJI Fly will display a landing prompt when the aircraft descends below 0.5 m.
DJI Mavic 3 User Manual Vision Systems and Infrared Sensing System DJI Mavic 3 is equipped with both an Infrared Sensing System and Forward, Backward, Lateral, Upward, and Downward Vision Systems. The Upward and Downward Vision Systems consist of two cameras each, and the Forward, Backward, and Lateral Vision Systems consist of four cameras in total. The Infrared Sensing System consists of two 3D infrared modules.
DJI Mavic 3 User Manual Using the Vision Systems When GNSS is unavailable, the Downward Vision System is enabled if the surface has a clear texture and sufficient light. The Forward, Backward, Lateral, and Upward Vision Systems will activate automatically when the aircraft is powered on if the aircraft is in Normal or Cine mode and Obstacle Avoidance is set to Bypass or Brake in DJI Fly.
DJI Mavic 3 User Manual Intelligent Flight Mode FocusTrack FocusTrack includes Spotlight 2.0, Point of Interest 3.0, and ActiveTrack 5.0. Spotlight 2.0 Control the aircraft manually while the camera remains locked on the subject. The mode supports both stationary and moving subjects such as vehicles, boats, and people.
DJI Mavic 3 User Manual 2. Drag a box around the subject in the camera view or enable Subject Scanning under Control settings in DJI Fly Control and tap the recognized subject to enable FocusTrack. The default mode is Spotlight. Tap the icon to switch between Spotlight, ActiveTrack, and POI. Tap GO to start FocusTrack. Mode N In Flight 80 12 26 RC 20 只能放置在控件右侧。在控件末尾或选中时消失。 7.9m/s 1.6m/s GO Spotline H 164.0 m D 108 m 4K 30 POI EV 1:30:30 +0.7 3.
DJI Mavic 3 User Manual Be extra vigilant when using FocusTrack in any of the following situations: a. The tracked subject is not moving on a level plane. b. The tracked subject changes shape drastically while moving. c. The tracked subject is out of sight for an extended period. d. The tracked subject is moving on a snowy surface. e. The tracked subject has a similar color or pattern to its surrounding environment. f. The lighting is extremely low (<300 lux) or high (>10,000 lux).
DJI Mavic 3 User Manual 4. Tap to access the video. Exiting MasterShots Press the Flight Pause button once or tap in DJI Fly to exit MasterShots. The aircraft will hover in place. Use MasterShots at locations that are clear of buildings and other obstacles. Make sure that there are no humans, animals, or other obstacles on the flight path. When the lighting is sufficient and the environment is suitable for vision systems, the aircraft will brake and hover in place if there is an obstacle detected.
DJI Mavic 3 User Manual Circle The aircraft automatically takes photos while flying around the selected subject to generate a timelapse video. Follow the steps below to use Circle: 1. Set the interval time, video duration, and max speed. Circle can be selected to travel in either a clockwise or counter-clockwise direction. The screen displays the number of photos that will be taken and how long the shooting time will be. 2. Select a subject on the screen.
DJI Mavic 3 User Manual Advanced Pilot Assistance Systems (APAS 5.0) The Advanced Pilot Assistance Systems 5.0 (APAS 5.0) feature is available in Normal and Cine mode. When APAS is enabled, the aircraft continues to respond to user commands and plans its path according to control stick inputs and the flight environment. APAS makes it easier to avoid obstacles, obtain smoother footage, and gives a better flying experience. Keep moving the control sticks in any directions.
DJI Mavic 3 User Manual Propellers There are two types of DJI Mavic 3 Low-Noise Quick Release Propellers, which are designed to spin in different directions. Marks are used to indicate which propellers should be attached to which motors. Make sure to match the propeller and motor following the instructions. Attaching the Propellers Attach the propellers with marks to the motors with marks and the unmarked propellers to the motors without marks.
DJI Mavic 3 User Manual Intelligent Flight Battery The DJI Mavic 3 Intelligent Flight Battery is a 15.4 V, 5000 mAh battery with smart charging and discharging functionality. Battery Features 1. Battery Level Display: The LED indicators display the current battery level. 2. Auto-Discharging Function: To prevent swelling, the battery automatically discharges to 96% of the battery level when it is idle for three days, and automatically discharges to 60% of the battery level when it is idle for nine days.
DJI Mavic 3 User Manual Using the Battery Checking Battery Level Press the power button once to check the battery level.
DJI Mavic 3 User Manual Charging the Battery Fully charge the Intelligent Flight Battery before every flight using the provided Mavic 3 Battery Charging Hub and DJI 65W Portable Charger. Using Charging Hub When used with the DJI 65W Portable Charger, the DJI Mavic 3 Battery Charging Hub can charge up to three Intelligent Flight Batteries in sequence from high to low power level. The charging time for one battery is approximately 1 hour and 36 minutes. 1 2 3 1. Status LED Indicator 2. Battery Port 3.
DJI Mavic 3 User Manual Using DJI 65W Portable Charger 1. Connect the DJI 65W Portable Charger to an AC power supply (100-240 V, 50/60 Hz). 2. Attach the aircraft to the charger using the battery charging cable with the battery powered off. 3. The battery level LEDs display the current battery level during charging. 4. The Intelligent Flight Battery is fully charged when all the battery level LEDs are off. Detach the charger when the battery is fully charged.
DJI Mavic 3 User Manual If the battery protection mechanisms activate, in order to resume charging it is necessary to unplug the battery from the charger and plug it in again. If the charging temperature is abnormal, wait for the charging temperature to return to normal, and the battery will automatically resume charging without requiring to unplug and plug in the charger again. Inserting the Intelligent Flight Battery Insert the Intelligent Flight Battery into the battery compartment of the aircraft.
DJI Mavic 3 User Manual Gimbal and Camera Gimbal Profile The 3-axis gimbal of DJI Mavic 3 provides stabilization for the camera, allowing you to capture clear and stable images and video. The control tilt range is -90° to +35°. 35° 0° -90° Use the gimbal dial on the remote controller to control the tilt of the camera. Alternatively, enter the camera view in DJI Fly. Press the screen until an adjustment bar appears and drag up and down to control the tilt of the camera.
DJI Mavic 3 User Manual The gimbal lock function works normally when the operating temperature is -10° to 40° C (14° to 104° F). It may malfunction outside this temperature range and a prompt will appear in DJI Fly if this occurs. If the gimbal lock malfunctions when attempting to unlock the gimbal, users can adjust the gimbal axes manually to unlock the gimbal. It is not recommended to manually adjust the gimbal axes unless necessary.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. 36 © 2021 DJI All Rights Reserved.
Remote Controller DJI RC Pro The DJI RC Pro remote controller features O3+, the latest version of DJI’s signature OcuSync image transmission technology, works at both 2.4 and 5.8 GHz, is capable of selecting the best transmission channel automatically, and can transmit a live HD view from the camera of the aircraft at a distance of up to 15 km. The built-in 5.
DJI Mavic 3 User Manual Controlling the Aircraft Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can be configured in DJI Fly. The default mode is Mode 2. Mode 1 Left Stick Right Stick Forward Up Down Backward Left Turn Left Mode 2 Left Stick Right Turn Right Right Stick Up Forward Down Backward Turn Left Mode 3 Left Stick Left Turn Right Right Stick Forward Right Up Down Backward Left 38 © 2021 DJI All Rights Reserved.
DJI Mavic 3 User Manual Remote Controller (Mode 2) ( Aircraft Remarks Indicates Nose Direction) Moving the left stick up or down changes the aircraft’s altitude. Push the stick up to ascend and down to descend. The more the stick is pushed away from the center position, the faster the aircraft will change altitude. Push the stick gently to prevent sudden and unexpected changes in altitude. Moving the left stick to the left or right controls the orientation of the aircraft.
DJI Mavic 3 User Manual RTH Button Press and hold the RTH button until the remote controller beeps to start RTH. Press this button again to cancel RTH and regain control of the aircraft. Refer to the Return to Home section for more information about RTH. Customizable Buttons Including C1, C2, and the 5D button. Go to System Settings in DJI Fly and select Control to customize the function of the button.
DJI Mavic 3 User Manual Remote Controller Alert The remote controller vibrates or beeps when there is an error or warning. Pay attention when prompts appear on the touchscreen or in DJI Fly. Slide down from the top to select Do Not Disturb or Mute to disable some alerts. Optimal Transmission Zone The signal between the aircraft and the remote controller is most reliable when the antennas are positioned in relation to the aircraft as illustrated below.
DJI Mavic 3 User Manual Touchscreen Operations Home 4:53 DJI Fly Gallery Files Firefox Setting Guide The top of the touchscreen displays the time, Wi-Fi signal, and battery level of the remote controller. Some apps are already installed by default such as DJI Fly, Gallery, Files, Firefox, Settings, and Guide. Settings includes network, display, voice, and Bluetooth configurations. Users can quickly learn about the features under Guide.
DJI Mavic 3 User Manual Quick Settings 1 2 10:12 Notifications DJI Fly 3 4 Sat, Mar 30 11m ago Expore skypixel.com One billion colors captured by the 10-bit DlogM color profile. Wi-Fi Bluetooth Screenshot Mobile Do not distube Record Screen 5 Airplane 6 7 1. Notifications Tap to check system notifications. 2. Recent Tap to check recently opened apps. 3. Home Tap to return to the home screen. 4. System Settings Tap to access system settings. 5. Shortcuts : Tap to enable or disable Wi-Fi.
DJI Mavic 3 User Manual Advanced Feature Calibrating the Compass The compass may need to be calibrated after the remote controller is used in areas with electromagnetic interference. A warning prompt will appear if the compass of the remote controller requires calibration. Tap the warning prompt to start calibrating. In other cases, follow the steps below to calibrate your remote controller. 1. Enter the home screen. 2. Select Settings, scroll down, and tap Compass. 3.
DJI Mavic 3 User Manual RC-N1 Built into the remote controller is DJI'S long-range tranmission technology, offering a maximum transmission range of 15 km and displaying video from the aircraft to DJI Fly on a mobile device at up to 1080p 60fps (depending on phone type). The aircraft and camera are easy to control using the onboard buttons and the detachable control sticks make the remote controller easier to store.
DJI Mavic 3 User Manual Controlling the Aircraft The control sticks control the aircraft’s orientation (pan), forward/backward movement (pitch), altitude (throttle), and left/right movement (roll). The control stick mode determines the function of each control stick movement. Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can be configured in DJI Fly. The default mode is Mode 2.
DJI Mavic 3 User Manual Remote Controller (Mode 2) ( Aircraft Remarks Indicates Nose Direction) Moving the left stick up or down changes the aircraft’s altitude. Push the stick up to ascend and down to descend. The more the stick is pushed away from the center position, the faster the aircraft will change altitude. Push the stick gently to prevent sudden and unexpected changes in altitude. Moving the left stick to the left or right controls the orientation of the aircraft.
DJI Mavic 3 User Manual Flight Pause/RTH Button Press once to make the aircraft brake and hover in place. If the aircraft is performing Smart RTH or auto landing, press once to exit the procedure and then brake. Press and hold the RTH button until the remote controller beeps to start RTH. Press this button again to cancel RTH and regain control of the aircraft. Refer to the Return to Home section for more information about RTH.
DJI Mavic 3 User Manual Linking the Remote Controller The aircraft and remote controller must be linked before using. Follow these steps to link a new remote controller: 1. Power on the remote controller and the aircraft. 2. Launch DJI Fly. 3. In camera view, tap and select Control and Pair to Aircraft (Link). 4. Press and hold the power button of the aircraft for more than four seconds. The aircraft beeps once indicating it is ready to link. The aircraft beeps twice indicating linking is successful.
DJI Fly App This section introduces the main functions of the DJI Fly app. 50 © 2021 DJI All Rights Reserved.
DJI Fly App Home Launch DJI Fly and enter the home screen. Altitude Zone (120m) Album Fly Spots Skypixel Academy Profile GO FLY Fly Spots View or share nearby suitable flight and shooting locations, learn more about GEO zones, and preview aerial photos of different locations taken by other users. Academy Tap the icon in the top right corner to enter Academy. Product tutorials, flight tips, flight safety, and manual documents can be viewed here.
DJI Mavic 3 User Manual Camera View 1 18 2 N Mode In-Flight 3 80 4 24 17 5 6 RC 7 20 8 9 17 10 1x AF 11 3m/s 4.6m/s H 150 m D 80 m 16 15 Storage RES&FPS 1:30:30 5.1K 50 14 EV +0.7 13 12 1. Flight Mode N : Displays the current flight mode. 2. System Status Bar In-Flight : Indicates aircraft flight status and displays various warning messages. 3. Battery Information 80 24'17" : Displays the current battery level and remaining flight time.
DJI Mavic 3 User Manual Sensors: Tap to view the IMU and compass status and start to calibrate if necessary. Battery: Tap to view the battery information such as battery cell status, serial number, times charged, and production date. Auxiliary LED: Tap to set the auxiliary LED to auto, on, or off. Do not turn on the Auxiliary LED before takeoff. Aircraft Front Arm LEDs: In auto mode, the aircraft front LEDs will be disabled during recording to ensure the quality is not affected.
DJI Mavic 3 User Manual 9. Explore Mode Tap and hold to enable Explore Mode. 1x The icon shows the zoom ration, and tap to adjust the zoom ratio. In Explore mode, the larger the zoom ratio, the slower the aircraft will rotate. AF / MF : Tap or hold the icon to switch the focus mode. 10. Shutter/Record Button : Tap to take a photo or to start or stop recording a video. 11. Playback : Tap to enter playback and preview photos and videos as soon as they are captured. 12.
DJI Mavic 3 User Manual Make sure to fully charge your device before launching DJI Fly. Mobile cellular data is required when using DJI Fly. Contact your wireless carrier for data charges. If you are using a mobile phone as your display device, DO NOT accept phone calls or use texting features during flight. Read all safety tips, warning messages, and disclaimers carefully. Familiarize yourself with the related regulations in your area.
Flight This section describes safe flight practices and flight restrictions. 56 © 2021 DJI All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended to hone your flight skills and practice flying safely. Make sure that all flights are carried out in an open area. Refer to the Remote Controller and DJI Fly sections for information about using the remote controller and the app to control the aircraft. Flight Environment Requirements 1. Do not use the aircraft in severe weather conditions including wind speeds exceeding 12 m/s, snow, rain, and fog. 2. Only fly in open areas.
DJI Mavic 3 User Manual When GNSS is available Flight Limits DJI Fly App Max Altitude Aircraft's altitude cannot exceed the specified value Warning: Height limit reached Max Radius Flight distance must be within the max radius Warning: Distance limit reached Only Downward Vision System is available Flight Limits DJI Fly App Max Altitude Height is restricted to 30 m when the GNSS signal is weak. Warning: Height limit Height is restricted to 3 m when the GNSS signal is weak reached.
DJI Mavic 3 User Manual Auto Takeoff/Landing Auto Takeoff Use auto takeoff: 1. Launch DJI Fly and enter the camera view. 2. Complete all steps in the pre-flight checklist. 3. Tap . If conditions are safe for takeoff, press and hold the button to confirm. 4. The aircraft will take off and hover 1.2 m above the ground. Auto Landing Use auto landing: 1. Tap . If conditions are safe to land, press and hold the button to confirm. 2. Auto landing can be cancelled by tapping . 3.
DJI Mavic 3 User Manual Stopping the Motors Mid-Flight Stopping motors mid-flight will cause the aircraft to crash. The motors should only be stopped midflight in an emergency situation such as if a collision has occurred or if the aircraft is out of control and is ascending or descending very quickly, rolling in the air, or if a motor has stalled. To stop the motors mid-flight use the same CSC that was used to start the motors. The default setting can be changed in DJI Fly.
Appendix 61 © 2021 DJI All Rights Reserved.
Appendix Specifications Aircraft Takeoff Weight 895 g (Mavic 3) 899 g (Mavic 3 Cine) Dimensions (L×W×H) Folded: 221×96.3×90.3 mm Unfolded: 347.5×283×107.7 mm Diagonal Distance 380.
DJI Mavic 3 User Manual Video Resolution Apple ProRes 422 HQ 5.1K: 5120 × 2700@24/25/30/48/50fps DCI 4K: 4096 × 2160@24/25/30/48/50/60/120*fps 4K: 3840 × 2160@24/25/30/48/50/60/120*fps H.264/H.265 5.1K: 5120 × 2700@24/25/30/48/50fps DCI 4K: 4096 × 2160@24/25/30/48/50/60/120*fps 4K: 3840 × 2160@24/25/30/48/50/60/120*fps FHD: 1920 × 1080@24/25/30/48/50/60/120*/200*fps * Recorded frame rate, corresponding video plays as slow motion video Max Video Bitrate H.264/H.
DJI Mavic 3 User Manual Forward Vision System Precision Measurement Range: 0.5-20 m Detection Range: 0.5-200 m Effective Sensing Speed: ≤15 m/s FOV: 90° (horizontal), 103° (vertical) Backward Vision System Precision Measurement Range: 0.5-16 m Effective Sensing Speed: ≤12 m/s FOV: 90° (horizontal), 103° (vertical) Lateral Vision System Precision Measurement Range: 0.5-25 m Effective Sensing Speed: ≤15 m/s FOV: 90° (horizontal), 85° (vertical) Upward Vision System Precision Measurement Range: 0.
DJI Mavic 3 User Manual Charging Hub Input USB-C: 5 V-20 V Output Battery Port: 12 V - 17.6 V Rated Power 65 W Charging Type Charge three Intelligent Flight Batteries in sequence Charging Temperature 5° to 40° C (41° to 104° F) Car Charger 5.0 A max 5.0 A max Input Car Power Port: 12.7 V-16 V Output USB-C: 5.0 V 5.0 A/9.0 V 5.0 A/12.0 V 20.0 V 3.25 A/5.0 V~20.0 V 3.25 A USB-A: 5 V 2 A Rated Power 65 W Charging Time Approx.
DJI Mavic 3 User Manual When recording at high video resolutions, it is recommended to use SD cards listed below. Corresponding resolutions: H.264 5.
DJI Mavic 3 User Manual Firmware Update Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the aircraft firmware. Using DJI Fly When you connect the aircraft or remote controller to DJI Fly, you will be notified if a new firmware update is available. To start updating, connect your remote controller or mobile device to the internet and follow the onscreen instructions. Note that you cannot update the firmware if the remote controller is not linked to the aircraft. Internet is required.
DJI Support http://www.dji.com/support This content is subject to change. Download the latest version from http://www.dji.com/mavic-3 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. DJI is a trademark of DJI. Copyright © 2021 DJI All Rights Reserved.
Quick Start Guide 快速入门指南 v1.
1 DJI Fly App https://s.dji.
4
5 6
EN CHS Check battery level: press once. Power on/off: press, then press and hold. 检查电量：短按一次。 开机 / 关机：短按一次，再长按 2 秒。 CHT 檢查電量：短按一次。 開機 / 關機：短按一次，再長按 2 秒。 ID Memeriksa tingkat baterai: tekan sekali. Menghidupkan/mematikan: tekan, lalu tekan dan tahan. JP KR MS TH バッテリー残量確認：1 回押す。 電源をオン／オフ：1 回押して、長押し。 배터리 잔량 확인 : 한 번 누르기 전원 켜기 / 끄기 : 한번 누르고 다시 길게 누르기 Periksa tahap bateri: tekan sekali. Hidupkan/matikan kuasa: tekan, kemudian tekan dan tahan.
Allumer/Éteindre: appuyez une fois, puis appuyez et maintenez le bouton enfoncé pour allumer/ éteindre. HR Provjera razine baterije: pritisnite jednom. Uključivanje/isključivanje: pritisnite, a zatim pritisnite i držite. HU Akkumulátor töltöttségi szintjének ellenőrzése: nyomja meg egyszer. Be- és kikapcsolás: nyomja meg, majd nyomja meg és tartsa lenyomva. IT Verificare il livello della batteria: premere una volta. Accendere/spegnere: premere, quindi premere e tenere premuto.
7 DJI Fly App Mode 2 / 美国手 / 美國手 / Mode 2 / モード 2 / 모드 2 / Mod 2 / โหมด 2 / Режим 2 / Režim 2 / Mode 2 / Modus 2 / Modo 2 / Λειτουργία 2 / Tila 2 / Mode 2 / Način 2 / 2.
WE ARE HERE FOR YOU 在线技术支持 Contact DJI SUPPORT via Facebook Messenger 微信扫一扫 获取技术支持 SUBSCRIBE FOR MORE INFO 关注 DJI 大疆创新及时获取最新资讯 www.dji.com/mavic-3/downloads MAVIC is a trademark of DJI. Copyright © 2021 DJI All Rights Reserved.
SAFETY GUIDELINES 安全概要 SICHERHEITSVORSCHRIFTEN CONSIGNES DE SÉCURITÉ РУКОВОДСТВО ПО ТЕХНИКЕ БЕЗОПАСНОСТИ v1.0 2021.
EN Safety at a Glance Make sure to understand and comply with all applicable rules regarding unmanned aerial vehicles, read this Safety at a Glance, and visit https://www.dji.com/mavic-3/ downloads to read the user manual and other documents with the most up-to-date instructions and warnings. The DJITM MAVICTM 3 Cine is NOT a toy and is NOT suitable for people under the age of 16. 1. Flight Environment DO NOT use the aircraft in severe weather conditions including heavy wind exceeding 13.
If a battery with a low power level has been stored for an extended period, the battery will enter deep hibernation mode. Recharge the battery to bring it out of hibernation. Disclaimer By using this product, you signify that you have read, understand, and accept the terms and conditions here. EXCEPT AS EXPRESSLY PROVIDED IN DJI AFTER-SALES SERVICE POLICIES AVAILABLE AT (HTTP://WWW.DJI.
Compliance Information FCC Compliance Notice Supplier’s Declaration of Conformity Product name: DJI Mavic 3 Cine Model Number: L2P Responsible Party: DJI Technology, Inc. Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502 Website: www.dji.com We, DJI Technology, Inc., being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations. This device complies with Part 15 of the FCC Rules.
部件名称 有害物质 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr+6) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 线路板 × ○ ○ ○ ○ ○ 外壳 × ○ ○ ○ ○ ○ 金属部件 （铜合金） × ○ ○ ○ ○ ○ 内部线材 × ○ ○ ○ ○ ○ 其他配件 × ○ ○ ○ ○ ○ 本表格依据 SJ/T 11364 的规定编制。 ○：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。 ×：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。 （产品符合欧盟 ROHS 指令环保要求） KCC Compliance Notice “해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 .
Declarația UE de conformitate: Prin prezenta, SZ DJI TECHNOLOGY CO., LTD. declară faptul că acest dispozitiv(DJI Mavic 3 Cine) este conform cu cerințele esențiale și celelalte prevederi relevante ale Directivei 2014/53/UE. Un exemplar al Declarației UE de conformitate este disponibil online, la adresa www.dji.com/euro-compliance Adresa de contact pentru UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germania Izjava EU o skladnosti: Družba SZ DJI TECHNOLOGY CO., LTD.
de colectare similare. Prin acest efort personal nesemnificativ, puteți contribui la reciclarea materiilor prime valoroase și la tratarea substanțelor toxice. Okolju prijazno odlaganje Starih električnih aparatov ne smete odvreči skupaj z ostanki odpadkov, temveč ločeno. Odlaganje na komunalnem zbirnem mestu je za fizične osebe brezplačno. Lastnik starih naprav je odgovoren, da jih pripelje do teh ali podobnih zbirnih mest.
WE ARE HERE FOR YOU 在线技术支持 Contact DJI SUPPORT via Facebook Messenger 微信扫一扫 获取技术支持 This content is subject to change. Download the latest version from www.dji.com/mavic-3/downloads MAVIC is a trademark of DJI. Copyright © 2021 DJI All Rights Reserved.
DJI RC Pro User Manual v1.0 2021.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this Manual 2 Read Before the First Use 2 Video Tutorials 2 Product Profile 4 Introduction 4 DJI RC Pro 5 Preparing the Remote Controller 7 Charging the Battery 7 Mounting 7 Activating the Remote Controller 7 Remote Controller Operations 9 Checking the Battery Level 9 Powering On/Off 9 Linking the Remote Controller 9 Controlling the Aircraft 10 Controlling the Camera 13 Controlling the Gimbal 13 Customizable Buttons 13 Status LED and Battery Level LEDs Desc
Product Profile Introduction The DJI RC Pro remote controller features O3+, the latest version of DJI’s signature OCUSYNCTM image transmission technology, and can transmit a live HD view from the camera of an aircraft at a distance of up to 15 km [1]. The remote controller also supports dual transmission, making the HD video downlink stable and reliable. The remote controller has a maximum operating time of 3 hours [2]. High-Bright Screen: The built-in 5.
DJI RC Pro User Manual DJI RC Pro 1 2 3 4 5 8 6 9 7 14 19 15 18 16 17 10 11 12 13 1. Antennas Relay aircraft control and video wireless signals. 2. Back Button Press once to return to the previous screen. Press twice to return to the home screen. 3. Control Sticks Use the control sticks to control the aircraft movements. Set the flight control mode in DJI Fly. The control sticks are removable and easy to store. 4. Return to Home (RTH) Button Press and hold to initiate RTH.
DJI RC Pro User Manual 20 21 24 23 22 25 20. Air Vent Used for heat dissipation. Do not block the air vent during usage. 21. Control Sticks Storage Slot For storing the control sticks. 22. Customizable C1 Button Switch between recentering the gimbal and pointing the gimbal downward. The function can be set in DJI Fly. 23. Speaker Outputs sound. 24. Customizable C2 Button Press once to turn the Auxiliary Bottom Light on or off. The function can be set in DJI Fly. 25. Air Intake Used for heat dissipation.
Preparing the Remote Controller Charging the Battery The built-in battery is placed in hibernation mode before delivery. It must be charged before using for the first time. It takes approximately two hours to fully charge the remote controller using a recommended USB charger rated 12V and one and a half hours using a recommended USB charger rated 15V. USB-C Cable Power Outlet 100~240 V USB Charger It is recommended to use an FCC/CE certified USB charger rated 12V or 15V.
DJI RC Pro User Manual 3. Log in with your DJI account. If you do not have an account, create a DJI account and log in. 4. Tap “Activate” on the activation page. 5. After activating, select if you would like to join the improvement project. The project helps to improve the user experience by sending diagnostic and usage data automatically every day. No personal data will be collected by DJI. Check the internet connection if the activation fails.
Remote Controller Operations Checking the Battery Level Press the power button once to check the current battery level. Low Battery High Powering On/Off Press and then press again and hold to power the remote controller on or off. Linking the Remote Controller The aircraft and remote controller must be linked before use. Follow these steps to link a new remote controller. Method 1: 1. Power on the remote controller and the aircraft. 2.
DJI RC Pro User Manual Controlling the Aircraft Control Mode The control sticks control the aircraft’s orientation (pan), forward/backward movement (pitch), altitude (throttle), and left/right movement (roll). The control stick mode determines the function of each control stick movement. Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can be configured in DJI Fly. The default mode is Mode 2.
DJI RC Pro User Manual Center position: control sticks are centered. Moving the control stick: control sticks are pushed away from the center. The figure below explains how to use each control stick. Mode 2 has been used as an example. Remote Controller (Mode 2) ( Aircraft Indicates Nose Direction) Left Stick Moving the left stick up or down changes the aircraft’s altitude. Push the stick up to ascend and down to descend.
DJI RC Pro User Manual Normal Mode: The aircraft utilizes GNSS and the Vision Systems and Infrared Sensing System to locate and stabilize itself. When the GNSS signal is strong, the aircraft uses GNSS to locate and stabilize itself. When the GNSS is weak but the lighting and other environment conditions are sufficient, the aircraft uses the vision systems to locate and stabilize itself.
DJI RC Pro User Manual Controlling the Camera The remote controller can be used to control the camera. 3 1 2 1. Focus/Shutter Button Press halfway down to auto focus and press all the way down to take a photo. The photo mode can be set in DJI Fly. 2. Record Button Press once to start or stop recording. 3. Camera Control Dial Use to adjust the zoom. Controlling the Gimbal The remote controller can be used to control the gimbal. 1. Gimbal Dial Use to adjust the tilt of the gimbal.
DJI RC Pro User Manual Status LED and Battery Level LEDs Description 1 2 1. Status LED The status LED displays the linking status and warnings for control stick, low battery level, and high temperature.
Touchscreen Home Screen 1 2 3 DJI Fly Gallery 4 5 6 7 8 Firefox Setting Guide 9 4:53 Files 1. Time Displays local time. 2. DJI Fly Tap to enter DJI Fly. 3. Gallery Tap to check stored images and videos. 4. Files Tap to check stored files. 5. Browser Tap to open the browser. 6. Setting Tap to enter system settings. 7. Guide Tap to read the guide and quickly learn about the remote controller buttons and LEDs. 8. Wi-Fi Signal Displays the Wi-Fi signal status when connected to Wi-Fi.
DJI RC Pro User Manual Operations 16 Slide from the left or right to the center of the screen to return to the previous screen. Slide up from the bottom of the screen to return to the home screen. Slide up and right from the bottom of the home screen to access recently opened apps when on the home screen. Slide up from the bottom of the screen to access the recently opened apps when not on the home screen. © 2021 DJI All Rights Reserved.
DJI RC Pro User Manual Shortcut Settings 2 1 10:12 Notifications DJI Fly 3 4 Sat, Mar 30 11m ago Expore skypixel.com One billion colors captured by the 10-bit DlogM color profile. Wi-Fi Bluetooth Screenshot Mobile Do not distube Record Screen 5 Airplane 6 7 1. Notifications Tap to check system notifications. 2. Recent Tap to check recently opened apps. 3. Home Tap to return to the home screen. 4. System Settings Tap to access system settings. 5. Shortcuts : Tap to enable or disable Wi-Fi.
DJI RC Pro User Manual Combination Buttons Some frequently-used features can be activated by using combination buttons. To use combination buttons, hold the back button and press the additional button. Checking Available Combination Buttons Power on the remote controller, enter the home screen, and tap Guide to check combination buttons. Using Combination Buttons The functions of the combination buttons cannot be changed. The following table displays the function of each combination button.
Advanced Feature Calibrating the Compass The compass may need to be calibrated after the remote controller is used in areas with electromagnetic interference. A warning prompt will appear if the compass of the remote controller requires calibration. Tap the warning prompt to start calibrating. In other cases, follow the steps below to calibrate your remote controller. 1. Enter the home screen. 2. Select Settings, scroll down, and tap Compass. 3.
Appendix Specification O3+ Operation Frequency Range 2.400-2.4835 GHz; 5.725-5.850 GHz* Max Transmission Distance (Unobstructed, free of interference) 15 km (FCC); 8 km (CE/SRRC/MIC) Transmission Power (EIRP) 2.4 GHz: <33 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5.8 GHz: <33 dBm (FCC); <14 dBm (CE); <23 dBm (SRRC) Wi-Fi Protocol 802.11b/a/g/n/ac/ax 2×2 MIMO Operation Frequency Range 2.400-2.4835 GHz; 5.725-5.850 GHz* Transmission Power (EIRP) 2.4 GHz: <26 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5.
DJI Support http://www.dji.com/support This content is subject to change. Download the latest version from https://www.dji.com/rc-pro/downloads If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. DJI is a trademark of DJI. Copyright © 2021 DJI All Rights Reserved.
DJI RC Pro Quick Start Guide v1.
Disclaimer Carefully read this entire document and all safe and lawful practices provided by DJITM before using this product for the first time. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity.
Introduction The DJI RC Pro remote controller features O3+, the latest version of DJI’s signature OCUSYNCTM image transmission technology, and can transmit a live HD view from the camera of an aircraft [1] at a distance of up to 15 km[2]. Users can connect to the internet via Wi-Fi and the Android operating system comes with a variety of functions such as Bluetooth and GNSS. The built-in 5.
2. The remote controller will sound an alert if it is powered on but has not been used for five minutes. It will automatically power off after a further 30 seconds. Move the control sticks or perform any other remote controller action to cancel the alert. 3. Make sure the antennas of the remote controller are unfolded and adjusted to the proper position for optimal transmission. 4. Contact DJI Support to repair or replace the antennas if they are damaged. Damaged antennas greatly decrease performance. 5.
Overview 1. Antennas 2. Back Button/Function Button 3. Control Sticks 1 2 3 4 5 8 6 10 11 12 13 7 9 4. RTH Button 5. Flight Pause Button 6. Flight Mode Switch 7. 5D Button 8. Power Button 9. Confirm Button/Customizable C3 Button 10. Touchscreen 11. microSD Card Slot 12. USB-C Port 13.
14 19 15 18 16 17 14. Gimbal Dial 15. Record Button 16. Status LED 17. Battery Level LEDs 18. Focus/Shutter Button 19. Camera Settings Dial 20. Air Vent 21. Control Sticks Storage Slots [1] 20 24 25 21 22. Customizable C1 Button 23 22 24. Customizable C2 Button 23. Speaker 25. Air Intake [1] A pair of control sticks are stored in the control sticks storage slot before delivery. The control sticks have already been mounted to the remote controller in the illustration in the Overview section.
1. Charging and Checking Battery Level The built-in battery is placed in hibernation mode before delivery. It must be charged before using for the first time. Check battery level: press power button. Power on/off: press, then press and hold. It takes approximately two hours to fully charge the remote controller using a recommended USB charger rated 12V and one and a half hours using a recommended USB charger rated 15V.
2. Preparing the Remote Controller Remove the control sticks from the storage slots Attach the control sticks and twist to secure The optimal transmission range is where the antennas are facing toward the aircraft and the angle between the antennas and the back of the remote controller is 180° or 270°. The illustrations show situations where the operator and aircraft are far away. Unfold the antennas • Make sure the control sticks are firmly mounted.
3. Activating the Remote Controller Internet The remote controller needs to be activated before using for the first time. An internet connection is required for activation. Power on the remote controller Hello Hello Hello Welcome Welcome Welcome Next Next Next Start Start Start Select the language Follow the prompts to activate Check the internet connection if activation fails. Try to activate the remote controller again if the internet connection is normal.
4. Linking The remote controller is already linked to the aircraft when it is purchased together as part of a combo. Otherwise, follow the steps below to link the remote controller and the aircraft after activation. 1. Power on the remote controller and the aircraft. 2. Press the customizable C1 button, customizable C2 button, and the record button simultaneously. The status LED will blink blue and the remote controller will beep twice to indicate linking has started. 3.
5. Flight Before takeoff, make sure that takeoff is permitted in the camera view of DJI Fly. • Auto Takeoff/Landing ／ Tap this icon in the camera view. When the prompt appears, press and hold the button to initiate auto takeoff or landing. • Manual Takeoff/Landing Perform combination stick command to start/stop the motors. OR Takeoff Slowly push the left control stick (Mode 2) up to take off. Landing Slowly push the left control stick down until the aircraft lands.
The default control stick mode is Mode 2. The left control stick controls the altitude and heading of the aircraft, while the right control stick controls the forward, backward, and sideward movements. Left Stick Right Stick Up Forward Down Turn Left Backward Turn Right Left Right • The motors can only be stopped mid-flight when the flight controller detects a critical error. • Make sure the remote controller is linked to the aircraft.
Specifications O3+ Operation Frequency Range Max Transmission Distance (Unobstructed, free of interference) Transmission Power (EIRP) Wi-Fi Protocol Operation Frequency Range Transmission Power (EIRP) Bluetooth Protocol Operation Frequency Range Transmission Power (EIRP) General Battery 2.400-2.4835 GHz; 5.725-5.850 GHz* 15 km (FCC); 8 km (CE/SRRC/MIC) 2.4 GHz: <33 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5.8 GHz: <33 dBm (FCC); <14 dBm (CE); <23 dBm (SRRC) 802.11b/a/g/n/ac/ax 2×2 MIMO 2.400-2.4835 GHz; 5.725-5.
Charging Type Rated Power Storage Capacity Charging Time Operating Time Video Output Port Operation Temperature Range Storage Temperature Range Charging Temperature Range Supported Aircraft Models** GNSS Weight Model Recommended to use USB chargers rated 12V or 15V 12 W ROM 32GB + expandable storage via microSD card 2 hours (using a USB charger rated 12V) 1.
