Mini 3 Pro - User Manual v1.0
©
2022 DJI All Rights Reserved.
55
DJI Mini 3 Pro
User Manual
Sensors: Tap to view the IMU and compass statuses and start calibration if necessary.
Battery: Tap to view battery information such as battery cell status, serial number, and number of
times charged.
Unlock GEO Zone: Tap to view information about unlocking GEO Zones.
The Find My Drone feature uses the map to nd the location of the aircraft on the ground.
Advanced Safety Settings include the behavior settings for the aircraft when remote controller
signals are lost and stopping the propellers mid-ight during emergencies.
The behavior of the aircraft when remote controller signals are lost can be set to Return to Home,
Descend, or Hover.
“Emergency Only” indicates that the motors can only be stopped mid-ight in case of an emergency,
such as a collision, a motor stalling, the aircraft rolling in the air, or the aircraft being out of control
and ascending or descending quickly. “Anytime” indicates that the motors can be stopped mid-ight
anytime once the user performs a combination stick command (CSC).
Stopping the motors mid-ight will cause the aircraft to crash.
Control
Aircraft Settings: Set measurement units.
Subject Scanning: The aircraft will automatically detect subjects when Subject Scanning is enabled.
Gimbal Settings: Tap to set the gimbal mode, enter advanced settings, perform gimbal calibration,
and recenter or tilt the gimbal down.
Remote Controller Settings: Tap to set the function of the customizable button, calibrate the
remote controller, switch control stick modes (Mode 1, Mode 2, Mode 3, or custom mode), or set
the advanced settings of the remote controller.
Beginner Flight Tutorial: View the ight tutorial.
Connect to the Aircraft: Tap to start linking when the aircraft is not linked to the remote controller.
Camera
Camera Parameter Settings: Displays dierent settings according to the shooting mode.
General Settings: Tap to view and set histogram, overexposure warning, peaking level, gridlines,
and white balance.
Storage Location: Footage can be stored in the aircraft’s internal storage or on a microSD card.
Internal storage and microSD cards can be formatted. The footage downloaded to the aircraft’s
internal storage or microSD card can be synced to the user’s mobile device, and the max video
cache capacity settings can also be adjusted.
Reset Camera Settings: Tap to restore camera parameters to the default settings.
Transmission
A livestreaming platform can be selected to broadcast the camera view in real time.
The frequency band and channel mode can also be set in the transmission settings.
About
View device information, rmware information, app version, battery version, and more.
8. Shooting Modes
Photo: Single, Burst Shooting, AEB, 48MP, or Timed Shot.
Video: Normal, Slow Motion. Digital zoom is supported in normal video mode.
MasterShots: Select a subject. The aircraft will record while executing different maneuvers in
sequence and keeping the subject in the center of the frame. A short cinematic video will be
generated afterward.