User Manual
© 2018 DJI All Rights Reserved.
9
b. Read and understand the warning messages and disclaimer before setting the altitude
beyond the default limit.
c. Read and understand the warning messages and disclaimer before switching between ight
modes.
d. Read and understand the warning messages and disclaimer prompts near or inside the no
y zone.
e. Read and understand the warning messages before using the Intelligent Flight modes.
5. Land your aircraft immediately at a safe location if there is an alert shown on the app.
6. Examine and check all warning messages on the checklist displayed in the app prior to each ight.
7. Use the in-app simulator to practice your ight skills if you have never operated the aircraft or if
you do not have sufcient experience to be comfortable operating the aircraft.
8. Beginner Mode is enabled by default when you launch the app for the first time. The aircraft’s
altitude and ight distance is restricted when ying in Beginner Mode. We recommend you y in
Beginner Mode to perfect your ight skills. Operate the actual aircraft only after you are condent
that you have mastered adequate ight skills.
9. Cache the map data of the area where you intend to fly the aircraft by connecting to the
Internet before each ight.
10. The app is designed to assist your operation. Please use your sound discretion and DO NOT
rely on the app to control your aircraft.
11. Your use of the app is subject to the DJI GO 4 app Terms of Use and DJI Privacy Policy.
Please read them carefully in the app.
Firmware
To avoid serious injury to children and animals, observe the following rule:
1. Keep children and animals at a safe distance during any firmware upgrade, system
calibration, and parameter setting procedures.
1. For safety, always update the rmware to the latest version when an upgrade notication is
shown in the DJI GO 4 app.
2. Firmware upgrade notifications will prompt you to proceed with an update immediately or to
update the rmware within three days. If you choose to ignore the current rmware update, you
are required to accept the prompted disclaimer. You further understand and agree that the data
including but not limited to user selection records may be uploaded to and maintained on a DJI-
designated server.
3. DO NOT power off the devices during rmware updating. Ensure the batteries have at least
50% power.
4. Be sure to download the rmware package le from the DJI ASSISTANT
TM
2. Verify the rmware
package le’s integrity before upgrading.
5. Be sure to update the remote controller's rmware after updating the rmware of the aircraft.
6. The remote control device may become unlinked from the aircraft after updating. Re-link the
remote control device and aircraft.
7. Be sure to check all connections and remove the propellers from the motors before performing
the rmware update. DO NOT disconnect the aircraft or remote controller from the computer or
Internet when updating the rmware.
Product Care
Storage and Transportation
To avoid serious injury to children and animals, observe the following rule: