Bluetooth controller Operating Manual I. Product Introduction Bluetooth controller T1d, support Bluetooth 4.0 wireless connection. It is suitable for Android devices (version 4.3 or above) and Apple devices (system version iOS8.0 or above). This product fully intelligent and automatically identifies various models of equipment, no need to manually set Android or iOS mode, connect and play. II.
III. Concept of Controller Custom key Custom key Charging port Power button Video button Photo button C1 Power display Pair C2 MENU Custom key Custom key Custom key Custom key Custom key Left joystick Left joystick Right joystick Right joystick Lifting Falling Turn left Back Turn right Left Right Note: The factory default setting of the controller is the "America hand".
IV. Function Description 1. Turn on and connect the controller 1) Short press the button to turn on, if it starts successfully, the ABXY button of the controller will be always on. 2) Power display LED flickers slowly; Enter the Bluetooth mode directly to wait for the APP connection; 3) Enter the flight control APP to connect the controller; 4) After connecting, the power display LED is always on and show the quantity of electricity.
7. Reset Press the pinhole on the back of the controller quickly with the paperclip, to force the entire controller to power off once, and reboot. 8. Firmware upgrading(OTA) Connect the controller through the mobile phone APP Bluetooth, to process OTA upgrade. Support Android 4.3 +, iOS8.0 + system; App download address: www.gamesirhk/t1d 1) After entering the upgrade mode, the LED keeps on Lantern Dance, and waits for the upgrade.
※I MPORTANT SAFETY INSTRUCTIONS For all products: 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with a dry doth. 7.Do not block any ventilation openings. Install this apparatus in accordance with the manufacturer^ instructions. 8.Do not install this apparatus near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9.
17.The mains plug of the power-supply cord shall remain readily operable. 18.Do not expose batteries to excessive heat such as sunshine, fire or the like. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. THE LIGHTNING FLASH AN ARROWHEAD SYMBOL, WITHIN AN EQUILATERALTRIANGLE, IS INTENDEDTO ALERT THE USER TO THE PRESENCE OF UNINSULATEDTANGEROUS VOLTAGE"WITHIN THE PRODUQ'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCKTO PERSONS.
not occur in a particular installation. If this equipment does ause harmliil interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
For All Products Except Those with Wireless Operation: GuangZhou Chicken Run Network Technology Co,Ltd.Hereby declares that this equipment is in compliance with the EMC 2014/30/EU Dirertive, LVD 2014/35/EU Dircrtive,ErP 2012/27/EU Directive and RoHS 2011/65/ EU Directive. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.gamesir.hk For All Products with Wireless Operation: GuangZhou Chicken Run Network Technology Co,Ltd.
