Owner's Manual

5. Land your aircraft immediately if there is an alert shown on the app.

6. Examine and check all warning messages on the checklist displayed in the app prior to each ight.

7. Use the in-app simulator to practice your ight skills if you have never operated the aircraft or if you do not have

sufcient experience to be comfortable operating the aircraft.

8. Beginner Mode is enabled by default when you launch the app for the rst time. The aircraft’s altitude and ight

distance is restricted when ying in Beginner Mode. We recommend you y in Beginner Mode to perfect your ight

skills. Operate the actual aircraft only after you are condent that you have mastered adequate ight skills.

9. Cache the map data of the area where you intend to y the aircraft by connecting to the Internet before each ight.

10. The ap

p is designed to assist your operation. Please use your sound discretion and DO NOT rely on the

app to control your aircr

aft.

11. Your u

se of the app is subject to the DJI GO 4 app Terms of Use and DJI Privacy Policy. Please read

them carefully in the app.

Firmware

To avoid serious injury to children and animals, observe the following rule:

Keep children and animals at a safe distance during any rmware upgrade, system calibration, and

parameter setting procedures.

1. For safety, always update the rmware to the latest version when an upgrade notication is shown in the app.

2. Firmware upgrade notications will prompt you to proceed with an update immediately or to update the rmware

within three days. If you choose to ignore the current rmware update, you are required to accept the prompted

disclaimer. You further understand and agree that the data including but not limited to user selection records may

be uploaded to and maintained on a DJI-designated server.

3. Be sure to download the rmware package le from the ofcial DJI website. Verify the rmware package le’s

integrity before upgrading.

4. Be sure to update the remote controller’s rmware to the latest version after you update the aircraft’s rmware.

5. The remote controller may become unlinked from the aircraft after updating. Re-link the remote controller and

aircraft.

6. Be sure to check all connections and remove the propellers from the motors before performing the firmware

update.

Product Care

Storage and Transportation

To avoid serious injury to children and animals, observe the following rule:

1. Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of reach of children

and animals.

1. Store the Intelligent Flight Battery and remote controller in a cool, dry place away from direct sunlight to ensure the

built-in LiPo battery does NOT overheat. Recommended storage temperature: between 71° and 82° F (22° and 28°

C) for storage periods of more than three months. Never store in environments outside the temperature range of

32° to 113° F (0° to 45° C).

2. DO NOT allow the camera to come into contact with, or become immersed in, water or other liquids. If it gets