User Manual

©2013-2014 DJI Innovations. All Rights Reserved.
2
nd
Level Low Battery Capacity Warning
Not Stationary or Sensor Bias is too big
Errors & Aircraft cannot fly.
Compass data abnormal because of ferro-magnetic interference or
the compass needs calibration.
（1） The LED indicators diagram above are for Phantom 2 mode. In Naza-M mode, LED indicators
will work according to the Naza-M flight control system.
（2） Connect to the PHANTOM 2 Assistant Software for detailed information about warnings and
errors.
2. The front LEDs are for indicating where the nose of the aircraft is. They light up solid red only after the motors
have spooled up.
The front
LEDs
1.4 Notes for PHANTOM 2 using with other DJI products
Before using PHANTOM 2 with other DJI products, users should connecting the products correctly and upgrade
the firmware as requirements below .
Items to upgrade
Firmware versions required
Assistant Software for
upgrading
Assistant Software
version
P330CB (built-in
central board)
V1.0.1.19 or above
PHANTOM 2
V1.08 or above
Zenmuse H3-2D
CMU V1.0，IMU V1.6 or above
PHANTOM 2
V1.08 or above
iOSD Mark II
V3.01 or above
iOSD
V4.0 or above
iOSD mini
V1.06 or above
iOSD
V4.0 or above
*The iOSD Assistant Software is applied to both iOSD Mark II and iOSD mini.