User Manual

©2013-2014 DJI Innovations. All Rights Reserved.
The remote controller will power off automatically when battery voltage drops below 4V. Land and
change batteries as soon as possible when the low voltage alert occurs to avoid loss of control during
flight.
3.3 Antenna Orientation
The remote controller’s antenna should point skywards without obstructions for maximum communication range
during flight.
Figure 3-3
3.4 Remote Controller Operation
The operations of remote controller are based on mode 2 stick configuration.
Definitions
The ‘stick neutral’ positions and ‘stick released’ mean the control sticks of the remote controller are placed at
the central position.
To ‘move the stick’ means that the stick of remote controller is pushed away from the central position.
Slide Lever is used for the pitch control of the H3-2D and H3-3D gimbal.
Remote
Controller
(Mode 2)
Aircraft
（ nose direction）
Operation details
The throttle stick controls the aircraft elevation.
Push the stick up and the aircraft will rise.
Pull the stick down and the aircraft will descend.
The aircraft will automatically hover and hold its
altitude if the sticks are centered.
Pushing the throttle stick above the centered
(neutral) position will result in the aircraft taking
off. We suggest that you push the throttle stick
slowly to prevent the aircraft from sudden and
unexpected ascent.