User Manual

7.4 PHANTOM RC Assistant Software Description

Please follow the procedures to finish the configuration of the remote controller.

1. Turn off the remote controller and find the Micro-USB port on the bottom of it.

2. Start up the PC, power on the remote controller, and then Connect the remote controller to the PC with a

Micro-USB cable. DO NOT disconnect until the configuration is finished.

3. Run the PHANTOM RC Assistant Software and wait for the remote controller to connect to the Assistant

Software. Observe the indicators on the bottom left of the screen. When connected successfully, the

connection indicator is and communication indicator is blinking .

4. Finish configuration in the [Main] page.

5. Finish upgrade in the [Info] page if necessary.

DT7调参软件

Main page of the 2.4GHz remote controller

Language swap

Main page

Connection indicator

Communication indicator

Firmware upgrade

Account, software

version

*This image is for

reference only. Please

refer to the actual

user interface.