User Manual

©2014 DJI. All Rights Reserved.
LED Flight Indicators Description
Normal status
LED flight indicators
Notes
Power On Self-Test
----
Warming Up
Aircraft cannot take off.
Ready to Fly
Slow blinking green.
Ready to Fly (non-GPS)
Slow blinking yellow.
Abnormal status
LED flight indicators
Remote Controller Signal Lost
Fast blinking yellow. Refer to <Failsafe
Function>.
1
st
Level Low Battery Capacity Warning
Slow blinking red.
2
nd
Level Low Battery Capacity Warning
Fast blinking red.
Not Stationary or Sensor Bias is too big
Keep aircraft stationary or perform
IMU calibration.
Error*
Cannot fly.
Compass Needs Calibration
Refer to <Calibrating the Compass>.
(1) The aircraft should be kept stationary on level ground before takeoff.
(2) Make sure the aircraft’s status is in Ready to Fly or Ready to Fly (non-GPS) mode before takeoff.
(3) If an error occurs (LED is solid red), please connect to the PHANTOM 2 VISION Assistant
Software for more detailed information.
NO.
Errors
Operation
1
IMU calibration is required.
Calibrate within the Assistant Software.
2
IMU is abnormal.
Should be repaired.
3
Compass is abnormal.
Should be repaired.
4
Remote controller’s mid-point is set
abnormally.
Refer to < How to solve large margin(s) mid
point error?>.