User Manual

Low Battery Capacity Warning

Refer to the <DJI VISION App Usage> for details.

(1) Remember to fly your PHANTOM 2 VISION back as soon as you see a low battery capacity warning.

(2) The PHANTOM 2 VISION is "Ready To Fly," "Ready to Capture" and "Ready to Share" but it is still

an aircraft. Keeping the battery contact needles and pads clean is very important. Any dirt and dust

may cause a communication failure.

11.6 Flight Limits

All UAV (unmanned aerial vehicle) operators should abide by all regulations from such organizations at ICAO

(International Civil Aviation Organization) and per country airspace regulations. For safety reasons, the flight limits

function is enabled by default to help users use this product safely and legally. The flight limits function includes

height, distance limits.

In Ready to Fly status, height and distance limits works together to restrict the flight. In Ready to Fly (non-GPS)

status, only height limit works and the flying height restricted to be not over 120m.

(1) The default parameters in the Assistant Software is compliant within the definitions of class G

ruled by ICAO. (Refer to Airspace Classification to get more details). As each country has its

own rules, make sure to configure the parameters to comply with these rules too, before using

the PHANTOM 2 VISION.

(2) Users in Mainland China can refer to 民用航空空域使用办法.

11.6.1 Max Height & Radius Limits

The Max Height & Radius restricts the flying height and distance. Configuration can be done in the PHANTOM 2

VISION Assistant. Once complete, your aircraft will fly in a restricted cylinder.