User Manual

switch to regain control. This is the same as regaining control during Failsafe. Please refer to Regaining

Control During Failsafe Procedure.

(1) When flying in the safety zone, LED flight indicators will blink red quickly and

continue for 3 seconds, then switch to indicate current flying status and continue for 5 seconds

at which point it will switch back to red blinking.

(2) For safety reasons, please do not fly close to airports, highways, railway stations, railway lines,

city centers and other special areas. Try to ensure the aircraft is visible.

11.6.3 Conditions of Flight Limits

In different working modes and flight modes, flight limits will differ according to number of GPS satellites found.

The following table demonstrates all the cases(√: available; ×:unavailable).

All flights are restricted by height, distance and special areas simultaneously. The Failsafe and Ground Station

operations are not restricted to flight limits, but if Ground Station function is used, the flight will be restricted the

special area limits built in to Ground Station. Refer to the Ground Station manual for details.

Phantom mode

Flight Status

Limits of Special Area

Max Height

Max Radius

Ready to Fly

√

Ready to Fly (non-GPS)

√

Naza-M mode

Control Mode

number of GPS found

Limits of Special Area

Max Height

Max Radius

GPS

≥6

√

＜6

√

ATTI.

≥6

√

＜6

√

Manual

≥6

＜6

11.6.4 Disclaimer

Please ensure that you are up to date with international and domestic airspace rules and regulations before using

this product. By using this product, you hereby agree to this disclaimer and signify that you have read this fully. You

agree that you are responsible for your own conduct and content while using this product, and for any direct or

indirect consequences caused by not following this manual, violating or disregarding other applicable local laws,

administrative rules and social habits thereof.