User Manual

Installer in DMG format supports only Mac OS X 10.6(Lion) or above.

Usage of PHANTOM 2 VISION Assistant Software on Mac OS X and Windows are exactly the same.

The Assistant Software pages appear in other places of this manual are on the Windows for example.

13.2 Using the PHANTOM 2 VISION Assistant Software on a PC

Start up the PC, power on the PHANTOM 2 VISION, then connect the PHANTOM 2 VISION to the PC

with a Micro-USB cable. DO NOT disconnect until configuration is finished.

Run the PHANTOM 2 VISION Assistant Software and wait for the PHANTOM 2 VISION to connect to the

Assistant Software. Observe the indicators on the bottom of the screen. When connected

successfully, the connection indicator is and communication indicator is blinking .

Choose [Basic] or [Advanced] configuration pages.

View and check the current configuration in the [View] page.

Language swap

View configurations

Connection indicator

Communication

indicator

RC, Gain

Gimbal, Battery

IMU calibration

Firmware upgrade

Account, software

version

*This image is for reference

only. Please refer to the

actual user interface.

Function switch between PHANTOM

2 VISION and NAZA-M