User manual

DJI GO App

Phantom 3 Standard

User Manual

[1] Flight Mode

: The current ight mode is displayed next to this icon.

Tap to enter the Main Controller Settings, where you can congure the parameters that affect ight

behavior.

The aircraft is in Beginner Mode by default, and cannot y 30 meters (98 feet) above or away from

the Home Point. You can disable Beginner Mode in the Main Controller Settings.

[2] GPS Signal Strength

: Shows the current GPS signal strength. Green bars indicate an adequate GPS strength.

[3] IOC Settings

: Displays the IOC settings when the aircraft is in F-Mode. Tap this icon to view the IOC menu

and select the desired IOC mode.

[4] System Status Bar

: Indicates the current aircraft system status and GPS signal strength.

[5] Battery Level Indicator

: Describes the battery level of the aircraft according to its immediate status. The colored

zones represent the various thresholds of battery level. When the battery level drops below a certain

threshold, the system will prompt the user to take the appropriate action.

[6] Remote Controller Signal

: Shows the signal strength of the remote controller.

[7] VideoDownlinkSignal

Shows the signal strength of the WiFi Video Downlink between the aircraft and the remote

controller. Tap to set the SSID and connection password for the WiFi connection.

[8] Battery Level

: Shows the current battery level. Tap to view the Aircraft battery menu, where you can view

battery information and set the battery warning thresholds.

[9] General Settings

: Tap to view the settings for the camera, mini-map and video cache.

[10] Camera Bar

Camera Operations

: Tap to enter various camera value settings, including color space for the recording, resolution

of the videos, image size and so on.

Shutter (Photo)

: Tap once to take a single photo. Tap and hold to switch between shooting modes.

Shutter (Video)

: Tap to start or stop recording video.