User manual

Flight

Once pre-ight preparation is complete, it is recommended that you use the ight simulator in the

DJI GO app to practice ying or have an experienced pilot accompany you for supervision. Ensure

that all ights are carried out in an open area.

Flying Conditions

1. DO NOT use the aircraft in adverse weather conditions including rain, snow, fog, and wind

speeds exceeding 10 m/s.

2. Only y in open areas. Tall buildings and steel structures may affect the accuracy of the on-

board compass and GPS signal.

3. Avoid ying near obstacles, crowds, high voltage power lines, trees and bodies of water.

4. Avoid ying in area with high levels of electromagnetism, including mobile phone base stations

and radio transmission towers.

5. Aircraft and battery performance is subject to environmental factors such as air density and

temperature. Be very careful when ying over 19685 feet (6000 m) above sea level as the battery

and aircraft performance may be reduced.

6. The Phantom 3 Standard cannot operate in P-Mode within the Earth’s polar regions.

Flight Limits and No Fly Zones

Unmanned aerial vehicle (UAV) operators should abide by the regulations from self-regulatory

organizations such as the International Civil Aviation Organization (ICAO), the Federal Aviation

Administration (FAA) and their local aviation authorities. For safety reasons, ight limits are enabled

by default to help users use this product safely and legally.

When operating the aircraft in P-Mode, the altitude limit, radius limit and No Fly Zones work together

to bound the aircraft. In A-Mode, the aircraft cannot exceed altitudes of 400 feet (120 m).

Altitude and Radius Limits

The pilot can set the altitude and radius limits in the DJI GO app to create a cyliderical geo-fence to

bound the aircraft. The tables below show the details of these limits.

Altitude Limit

Radius Limit

Home Point

Starting Point of Aircraft