User Manual

Aircraft

Phantom 3 Professional

User Manual

Charger

Intelligent Flight Battery

Power Outlet

Charging the Intelligent Flight Battery

1. Connect the Battery Charger to a power source (100-240 V 50/60 Hz).

2. Open the Protection Cap and connect the Intelligent Flight Battery to the Battery Charger. If the battery

level is above 95%, turn on the battery before charging.

3. The Battery Level Indicator will display the current battery level as it is charging.

4. The Intelligent Flight Battery is fully charged when the Battery Level Indicators are all off.

5. Air-cool the Intelligent Flight Battery after each ight. Allow its temperature to drop to room temperature

before storing it for an extended period.

Always turn off the battery before inserting it or removing it from the Phantom 3 Professional.

Never insert or remove a battery when it is turned on.

Battery Life

LED1 LED2 LED3 LED4 Battery Life

90%~100%

80%~90%

70%~80%

60%~70%

50%~60%

40%~50%

30%~40%

20%~30%

below 20%

When battery life reaches 0%, it can no longer be used.

For more information about the battery, launch the DJI GO app and check the information that is listed

under the battery tab.

Battery life

Battery life refers to how many more times the battery can be discharged and recharged before it must

be replaced. When the battery is turned off, press and hold the Power Button for 5 seconds to check the

battery life. The Battery Level Indicators will light up and/or blink for two seconds, as shown below: