MAVIC PRO User Manual 2016.12 V1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this manual 2 Legends 2 Read Before the First Flight 2 Video Tutorials 2 Download the DJI GO 4 App 2 Download the DJI Assistant 2 2 Product Profile 6 Introduction 6 Features Highlights 6 Preparing the Mavic Pro 6 Aircraft Diagram 8 Remote Controller Diagram 8 Aircraft 11 Aircraft Profile 11 Flight Mode 11 Flight Status Indicator 12 Return-to-Home (RTH) 13 Intelligent Flight Mode 17 Forward and Downward Vision System 22 Flight Recorder 25 Attaching and D
DJI GO 4 App 41 Equipment 41 Editor 46 SkyPixel 46 Me 46 Flight 48 Flight Limits and No-Fly Zones 48 Preflight Checklist 49 Calibrating the Compass 50 Auto Takeoff and Auto Landing 51 Starting/Stopping the Motors 52 Flight Test 52 Appendix 4 48 Flight Environment Requirements 55 Specifications 55 Firmware Updates 56 Intelligent Flight Mode 57 Remote Controller LCD Screen Menu Information 58 After-Sales Information 59 © 2016 DJI All Rights Reserved.
Product Profile This section introduces the Mavic Pro and lists the components of the aircraft and remote controller. © 2016 DJI All Rights Reserved.
Product Profile Introduction The DJI Mavic Pro is DJI’s smallest flying camera, featuring a fully stabilized camera, Intelligent Flight Modes and Obstacle Avoidance inside a revolutionary folding design. It captures 4K videos and 12 megapixel photos, and is capable of both ActiveTrackTM and TapFlyTM making complex shots effortless. Mavic Pro boasts a maximum flight speed of 40 mph (65 kph) and a maximum flight time of 27 minutes*.
Mavic Pro User Manual Marked Unmarked Unfold the Arms Product Profile 1. Unfold the front arms, followed by the rear arms of the aircraft as shown. 2. Unfold all propeller blades. Unfold the front arms and the propellers before the rear ones. All arms and propellers must be unfolded before powering on the aircraft, or it may affect Self Diagnostic Testing. Preparing the Remote Controller 1. Unfold the mobile device clamps and the antennas. 2.
Mavic Pro User Manual Aircraft Diagram 1 2 3 4 5 1. Propeller 2. Motor 6 3. Front LED Indicator Product Profile 4. Forward Vision System 7 8 9 11 10 5. Landing Gear (with built-in antennas) 6. Gimbal and Camera 7. Intelligent Flight Battery 12 8. Link Button 9. Linking Status Indicator 10. Camera Micro SD Card Slot 11. Control Mode Switch 12. Micro USB Port 13 14 13. Aircraft Status Indicator 14. Downward Vision System Remote Controller Diagram 1.
Mavic Pro User Manual 5. LCD Screen Displays the aircraft and Remote Controller's 8. Mobile Device Clamp Securely mounts your mobile device onto the remote controller. system status. 6. Flight Pause Button Press once for emergency braking. 9. USB Port Connection to mobile device for DJI GO 4 app. 7. 5D Button The default configuration is listed below. Set these values based on your preference in Product Profile the DJI GO 4 app.
Aircraft This section introduces the Flight Controller, Forward and Downward Vision System, and the Intelligent Flight Battery. 10 © 2016 DJI All Rights Reserved.
Aircraft Aircraft Profile The Mavic Pro aircraft comprises of a flight controller, video downlink, propulsion system and an Intelligent Flight Battery. This section introduces the features of the flight controller, video downlink and other aircraft components. Flight Mode When the Forward Vision System is enabled and lighting conditions are sufficient, the maximum flight attitude angle is 16° with a maximum flight speed of 22 mph (36 kph).
Mavic Pro User Manual Flight Status Indicator The Mavic Pro has Front LEDs and Aircraft Status Indicator. The positions of these LEDs are shown in the figure below: Front LED Aircraft Status Indicator Aircraft Front LED The Front LEDs show the orientation of the aircraft. The Front LEDs glow solid red when the aircraft is turned on to indicate the front (or nose) of the aircraft (the Front LED can be turned off in the DJI GO 4 app).
Mavic Pro User Manual Return-to-Home (RTH) Return-to-Home (RTH) function brings the aircraft back to the last recorded Home Point. There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three scenarios in detail. Description GPS Home Point If a strong GPS signal was acquired before takeoff, the Home Point is the location from which the aircraft launched. The GPS signal strength is indicated by the GPS icon ( ).
Mavic Pro User Manual Smart RTH Use the RTH button on the remote controller or tap the RTH button in the DJI GO 4 app and follow the onscreen instructions when GPS is available to initiate Smart RTH. The aircraft status indicator will blink to display the current status. The aircraft will sense and avoid obstacles on its flight path during Smart RTH. The aircraft may choose to navigate or hover in place to avoid collision.
Mavic Pro User Manual Battery Level Warning Remark Aircraft Status Indicator DJI GO 4 App Flight Instructions Tap “Go-home” to have the aircraft return to the Home point automatically, or “Cancel” to resume normal flight. If no action is taken, the aircraft will automatically go home after 10 seconds. Remote controller will sound an alarm. Fly the aircraft back and land it as soon as possible, then stop the motors and replace the battery. Battery power is low. Land the aircraft.
Mavic Pro User Manual RTH Safety Notices The aircraft cannot avoid obstructions during RTH when the Forward Vision System is disabled. Therefore, it is important to set a suitable Failsafe altitude before each flight. Launch the DJI GO 4 app and enter “Camera” and tap to set the Failsafe altitude. 5m H 10 m RTH Altitude Aircraft 10 m RTH Altitude 5m H If Return to Home (RTH), including Smart RTH and Low Battery RTH, is 5m triggered and the aircraft is further than 20 m from the home point: 1.
Mavic Pro User Manual 5 meters 15 meters Intelligent Flight Mode TapFly Introduction With the TapFly feature, users can now tap on the mobile device screen to fly in the designated direction without using the remote controller. The aircraft will automatically avoid obstacles it sees or brake and hover provided that the lighting is appropriate (< 300 lux) nor too bright (> 10,000 lux).
Mavic Pro User Manual 3. Tap once on the target direction and wait for the and the aircraft will fly in that direction. READY TO GO (GPS) 09:29 12 P-GPS icon to appear. Tap again to confirm the selection 61% AE Aircraft D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.0M DO NOT guide the aircraft to fly towards people, animals, small and fine objects (e.g. tree branches and power lines) or transparent objects (e.g. glass or water). Watch for the obstacles in the flight path and stay clear of them.
Mavic Pro User Manual Exit TapFly Use the following methods to exit TapFly: 1. Press the Flight Pause button on the remote controller. 2. Pull back the pitch stick on the remote controller. 3. Tap “STOP” button on the screen. STOP OR OR Aircraft Flight Pause button Aircraft will stop and hover after exiting from TapFly. Tap a new target direction to continue flying or begin manual flight. ActiveTrack ActiveTrack allows you to mark and track a moving object on your mobile device screen.
Mavic Pro User Manual 3. Tap on the subject you want to track then tap to confirm selection. If the subject is not automatically recognized, drag a box around it. The box will turn green when tracking is in progress. If the box turns red, the object could not be identified and you should try again. READY TO GO (GPS) 09:29 P-GPS 12 61% AE ActiveTrack Aircraft D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.
Mavic Pro User Manual You must follow local privacy laws and regulations when using ActiveTrack. Aircraft will not be able to avoid obstacles while in Profile or Spotlight Mode. Use these modes in open areas. The aircraft will sense and avoid obstacles on its flight path. If the aircraft loses track of the subject, because it is moving too fast or obscured, re-select the subject to resume tracking. Exiting ActiveTrack STOP Aircraft Use the following methods to exit ActiveTrack: 1.
Mavic Pro User Manual Tripod Mode Tap the icon in the DJI GO 4 app to enable Tripod Mode. In Tripod Mode, the maximum flight speed is limited to 2.2 mph (3.6 kph). Responsiveness to stick movements is also reduced for smoother more controlled movements. Only use Tripod Mode where the GPS signal is strong or light conditions are ideal for the vision system. If GPS signal is lost and if the vision system cannot function, it will automatically switch to Atti mode.
Mavic Pro User Manual Detection Range The detection range of the Forward and Downward Vision System is depicted as follow. Note that the aircraft cannot sense or avoid the obstacles that are not within the detection range. Aircraft Calibrating Sensors Forward and Downward Vision Systems cameras installed on the aircraft are calibrated on delivery. However these cameras are vulnerable to excessive impact and will require occasional calibration via DJI Assistant 2 or the DJI GO 4 app.
Mavic Pro User Manual Using the Downward Vision System The Downward Vision System is activated automatically when the aircraft is turned on. No further action is required. The Downward Vision System is typically used in indoor environments where GPS is unavailable. Using the Downward Vision System, the aircraft can hover precisely even without GPS. Aircraft Follow the steps below to use Downward Vision System: 1. Toggle the flight mode switch to P-mode. 2. Place the aircraft on a flat surface.
Mavic Pro User Manual Keep sensors clean at all times. Dirt or other debris may adversely affect their effectiveness. The Downward Vision System is only effective when the aircraft is at altitudes of 0.3 to 13 meters. Forward and Downward Vision Systems may not function properly when the aircraft is flying over water. The Forward and Downward Vision System may not be able to recognize patterns on the ground in low light (less than 100lux).
Mavic Pro User Manual Attaching the Propellers Attach the white ringed propellers to the mounting base with white marks. Press the propeller down onto the mounting plate and rotate in the lock direction until it is secured. Attach the other propellers to the mounting bases without marks. Unfold all the propellers blades. Aircraft Marked Unmarked Detaching the Propellers Press the propellers down into the motor mount and rotate in the unlock direction. Be aware of the sharp edges of the propellers.
Mavic Pro User Manual DJI Intelligent Flight Battery Functions Refer to Mavic Pro Intelligent Flight Battery Safety Guidelines before use. Users take full responsibility for all operations and usage. Using the Battery Battery Level Indicators LED1 LED2 LED3 LED4 Power Button Turning ON/OFF Turning On: Press the Power Button once, then press again and hold for 2 seconds to turn on. The remote controller system status screen will display the current battery level.
Mavic Pro User Manual Low Temperature Notice: 1. Battery capacity is significantly reduced when flying in low temperature (-10°C and 5°C) environments. 2. Batteries cannot be used in extremely low temperature (< -10°C) environments. It is recommended to fully charged the battery when taking off in temperature between -10°C and 5°C. 3. End the flight as soon as the DJI GO 4 app displays the “Low Battery Level Warning” in low temperature environments. 4.
Mavic Pro User Manual Always turn off the battery before inserting it or removing it from the Mavic Pro. Never insert or remove a battery when it is turned on. Intelligent Flight Battery Power Outlet Charger Aircraft Battery Level Indicators While Charging LED1 LED2 LED3 LED4 Battery Level 0%~25% 25%~50% 50%~75% 75%~100% Fully Charged Battery Protection LED Display The table below shows battery protection mechanisms and corresponding LED patterns.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. 30 © 2016 DJI All Rights Reserved.
Remote Controller Remote Controller Profile The Mavic Pro remote controller is a multi-function wireless communication device that integrates the video downlink system and aircraft remote control system. The video downlink and aircraft remote control system operate at 2.4 GHz. The remote controller features a number of camera control functions, such as taking and previewing photos and videos, as well as controlling gimbal motion. The battery level is displayed via the LCD Screen of the remote controller.
Mavic Pro User Manual Power Outlet Charger Controlling the Camera Remote Controller Shoot videos/photos, and adjust camera settings via the Shutter Button, Record Button, and Camera Settings Dial on the remote controller. 4 1 3 2 1. Camera Settings Dial Turn the dial to adjust camera settings such as ISO, shutter speed, without letting go of the remote controller. 2. Shutter Button Press to take a photo. If burst mode is activated, multiple photos will be taken with a single press. 3.
Mavic Pro User Manual Remote Controller (Mode 2) ( Aircraft Indicates Nose Direction) Remarks Moving the left stick up and down changes the aircraft’s elevation. Push the stick up to ascend and down to descend. When both sticks are centered, the Mavic Pro will hover in place. The more the stick is pushed away from the center position, the faster the Mavic Pro will change elevation. Always push the stick gently to prevent sudden and unexpected elevation changes.
Mavic Pro User Manual Flight Mode Switch Toggle the switch to select the desired flight mode. Choose between P-mode and S-mode. Position SPORT SPORT Flight Mode P-mode SPORT S-mode Remote Controller P-mode (Positioning): P-mode works best when the GPS signal is strong. The aircraft utilizes the GPS and Forward and Downward Vision Systems to locate itself, automatically stabilize, and navigate between obstacles. Advanced features such as TapFly and ActiveTrack are enabled in this mode.
Mavic Pro User Manual Optimal Transmission Range The transmission signal between the aircraft and the remote controller is most reliable within the area that depicted below: Optimal Transmission Range weak Ensure that the aircraft is flying within the optimal transmission zone. To achieve the best transmission performance, maintain the appropriate relationship between the operator and the aircraft.
Mavic Pro User Manual Linking the Remote Controller The remote controller is linked to your aircraft before delivery. Linking is only required when using a new remote controller for the first time. Follow these steps to link a new remote controller: 1. Turn on the remote controller and connect to the mobile device, and turn on the aircraft. Launch the DJI GO 4 app. 2. Enter “Camera” and tap on and then tap “Linking RC” button. Toggle the Control Mode switch to RC mode before linking. Remote Controller 3.
Camera and Gimbal This section provides the technical specifications of the camera and explains the gimbal’s operation modes. © 2016 DJI All Rights Reserved.
Camera and Gimbal Camera Profile The on-board camera uses the 1/2.3 inch CMOS sensor to capture video up to 4K at 30 fps with the Mavic Pro and 12 megapixel stills. You may choose to record video in either MOV or MP4 formats. Available picture shooting modes include burst, continuous, and interval mode. A live preview of what the camera sees can be monitored on the connected mobile device via the DJI GO 4 app.
Mavic Pro User Manual Gimbal Gimbal Profile The 3-axis gimbal provides a steady platform for the attached camera, allowing you to capture clear, stable images and video. The gimbal can tilt the camera within a 120˚ range. 30° 0° Use the gimbal dial on the remote controller to control camera tilt, or go to Camera View in the DJI GO 4 app, tap and hold on the screen until a blue circle appears, then drag the circle to control the camera’s tilt.
DJI GO 4 App This section introduces the main functions of the DJI GO 4 app. 40 © 2016 DJI All Rights Reserved.
DJI GO 4 App The DJI GO 4 app is a mobile application designed specifically for DJI equipment. Use this app to control the gimbal, camera, and other aircraft functions. The app features Equipment, Editor, SkyPixel and Me sections, which are used for configuring your aircraft, editing and sharing your photos and videos with others.
Mavic Pro User Manual 1. System Status : This icon indicates aircraft flight status and various warning messages. READY TO GO (GPS) 2. Obstacles Detection Status : Red bars are displayed when obstacles are close to the aircraft. Orange bars are displayed when obstacles are in detection range. 3. Battery Level Indicator : The battery level indicator provides a dynamic display of the battery level.
Mavic Pro User Manual 13. Auto Exposure Lock AE : Tap to lock the exposure value. 14. Gimbal Slider : Displays the pitch of the gimbal. 15. Photo/Video Button : Tap to switch between photo and video recording modes. 16. Shoot / Record Button / : Tap to start shooting photos or recording video. 17. Camera Settings : Tap to set ISO, shutter and auto exposure values of the camera. : Tap to enter the playback page and preview photos and videos as soon as they are captured. 19.
Mavic Pro User Manual Slide left in the Camera view to enter the menu shown below. READY TO GO (GPS) 09:29 P-GPS 12 61% AE Portrait/Landscape Gimbal up/down Home Point: Aircraft Home Point: Me Adjust screen brightness D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.0M DJI GO 4 App Portrait/Landscape Switch to Portrait mode by tapping the icon. Gimbal up/down Tap the icon to point the camera downward or forward. Home Point Use aircraft location or remote controller location as the home point.
Mavic Pro User Manual Launch the DJI GO 4 app and tap the icon on the top right of your screen, then scan the WiFi QR Code on the front arm to start connection. Note that this feature is available on Android devices. When using Wi-Fi in a wide open area with no Electromagnetic Interference, transmission distance is approximately 262ft (80m) at an altitude of 164ft (50m). The maximum flight speed is 9mph (14kph), maximum ascent speed is 2m/s and maximum descent speed is 1m/s.
Mavic Pro User Manual Editor An intelligent video editor is built into the DJI GO 4 app. After recording several video clips and downloading them to your mobile device, go to Editor on the home screen. You can then select a template and a specified number of clips which are automatically combined to create a short film that can be shared immediately. SkyPixel View and share the photos and videos in the SkyPixel page.
Flight This section describes safe flight practices and flight restrictions. © 2016 DJI All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended that you use the flight simulator in the DJI GO 4 app to hone your flight skills and practice flying safely. Ensure that all flights are carried out in an open area. Flight Environment Requirements Flight 1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10 m/s, snow, rain and fog. 2. Fly in open areas.
Mavic Pro User Manual GPS Signal Strong Blinking Green Flight Limits DJI GO 4 App Aircraft Status Indicator Maximum Flight Altitude Aircraft's altitude cannot exceed the specified value. Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached. Rapid red flashing when close to the max radius limit.
Mavic Pro User Manual Calibrating the Compass Only calibrate the compass when the DJI GO 4 app or the status indicator prompt you to do so. Observe the following rules when calibrating your compass: DO NOT calibrate your compass where there is a chance of strong magnetic interference, such as magnetite, parking structures, and steel reinforcements underground. DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.
Mavic Pro User Manual 4. Re-calibrate the aircraft if the aircraft status indicators blink red. If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your aircraft to a different location and try again. DO NOT calibrate the compass near metal objects such as a metal bridge, cars, scaffolding. If the aircraft status indicator is blinking red and yellow alternately after placing the aircraft on the ground, the compass has detected magnetic interference.
Mavic Pro User Manual Starting/Stopping the Motors Starting the Motors A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom inner or outer corners to start the motors. Once the motors have started spinning, release both sticks simultaneously. OR Stopping the Motors Flight There are two methods to stop the motors. Method 1: When Mavic Pro has landed, push the left stick down , then conduct the same CSC that was used to start the motors, as described above .
Mavic Pro User Manual When the Aircraft Status Indicator blinks yellow rapidly during flight, the aircraft has entered Failsafe mode. A low battery level warning is indicated by the Aircraft Status Indicators blinking red slowly or rapidly during flight. Watch our video tutorials for more flight information. Video Suggestions and Tips 1. 2. 3. 4. 5. Go through the full pre-flight checklist before each flight. Select the desired gimbal operation mode in the DJI GO 4 app.
Appendix 54 © 2016 DJI All Rights Reserved.
Appendix Specifications Aircraft 1.62 lbs (734 g) Weight (including gimbal cover) 1.64 lbs (743 g) Dimensions 83 × 83 × 198 mm (folded) Diagonal Length (propellers excluded) 335 mm Max Ascent Speed 16.4 ft/s (5 m/s) in Sport Mode Max Descent Speed 9.8 ft/s (3 m/s) Max Speed 40.4 mph (65 kph) in Sport Mode without wind Max Service Ceiling Above Sea Level 16404 feet (5000 m) Max Flight Time 27 minutes (0 wind at a consistent 15.5 mph (25 kph)) Max Hovering Time 24 minutes (0 wind) Avg.
Mavic Pro User Manual C4K: 4096×2160 24p, 4K: 3840×2160 24/25/30p Video Recording Modes 2.7K: 2720×1530 24/25/30p FHD: 1920×1080 24/25/30/48/50/60/96p HD: 1280×720 24/25/30/48/50/60/120p Video Storage Bitrate 60 Mbps Supported File Systems FAT32 (≤ 32 GB), exFAT (> 32GB) Photo JPEG, DNG Video MP4, MOV (MPEG-4 AVC/H.264) Supported SD Cards microSDTM. Max capacity: 64GB Class 10 or UHS-1 rating required. Remote Controller Operating Frequency Max Transmission Distance 2.400 GHz to 2.
Mavic Pro User Manual Using DJI Assistant 2 Use the DJI Assistant 2 to update the firmware for the remote controller and the aircraft simultaneously. Follow the instructions below to update the firmware through DJI Assistant 2: 1. With the remote controller and the aircraft powered off, connect the remote controller to the computer through the charging port using a micro USB cable. 2. Power on the remote controller and aircraft. 3. Launch DJI Assistant 2 and login with your DJI account. 4.
Mavic Pro User Manual Remote Controller LCD Screen Menu Information Appendix Remote Controller Status BAT xx PCT SHUTDOWN_ CHARGING_ USB PLUGGED FC U-DISK UPGRADING BINDING Before Flight CONNECTING_ SYS INITING READY TO GO Flight Mode BEGINNER GPS MODE OPTI MODE ATTI MODE SPORT MODE Flight Status TAKING OFF LANDING GOING HOME NAV GOHOME NAV LANDING MAX ALT.
Mavic Pro User Manual STICK ERR+RE-CTR STCK WHEEL ERR+RE-CTR WHEL STICK ERR MECH ERR STICK EMI3+AUTO RTH STICK EMI2+MANUAL RTH STICK EMI1 After-Sales Information Visit the following pages to learn more about After-sales policy and warranty information: 1. After-sales Policy: http://www.dji.com/service 2. Refund Policy: http://www.dji.com/service/refund-return 3. Paid Repair Service: http://www.dji.com/service/repair-service 4. Warranty Service: http://www.dji.
DJI Support http://www.dji.com/support This content is subject to change. Download the latest version from http://www.dji.com/mavic If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. MAVICTM is a trademark of DJI. Copyright © 2016 DJI All Rights Reserved.
