User Manual
Aircraft
Mavic Pro
User Manual
24
©
2017 DJI All Rights Reserved.
Using the Downward Vision System
The Downward Vision System is activated automatically when the aircraft is turned on. No further
action is required. The Downward Vision System is typically used in indoor environments where
GPS is unavailable. Using the Downward Vision System, the aircraft can hover precisely even with-
out GPS.
Follow the steps below to use Downward Vision System:
1. Toggle the ight mode switch to P-mode.
2. Place the aircraft on a at surface. Note that the Downward Vision System cannot work
properly on surfaces without clear pattern variations.
3. Turn on the aircraft. The aircraft status indicator will ash green two times, which
indicates the Downward Vision System is ready. Gently push the left stick up to lift
off and the aircraft will hover in place.
2m以上
SPORT
Assisted Braking from Forward Vision System
Powered by the Forward Vision System, the aircraft is able to actively brake when obstacles are detected
in front. Forward and Downward Vision Systems work best when lighting is adequate and the obstacle is
clearly marked or textured. The aircraft must y at no more than 22mph (36kph) to allow sufcient braking
distance.