User Manual

DJI GO 4 App

Mavic Pro

User Manual

1. System Status

READY TO GO (GPS)

: This icon indicates aircraft ight status and various warning messages.

2. Obstacles Detection Status

: Red bars are displayed when obstacles are close to the aircraft. Orange bars are

displayed when obstacles are in detection range.

3. Battery Level Indicator

: The battery level indicator provides a dynamic display of the battery level. The colored

zones on the battery level indicator represent the power levels needed to carry out different functions.

4. Flight Mode

: The text next to this icon indicates the current ight mode.

Tap to congure the MC (Main Controller) Settings. These settings allow you to modify ight limits and

set gain values.

5. Camera Parameters

Displays camera settings parameters and capacity of the Micro SD card.

6. GPS Signal Strength

: Shows the current GPS signal strength. White bars indicate adequate GPS strength.

7. Forward Vision System Status

: Tap into this button to enable or disable features provided by the Forward Vision System.

8. Remote Controller Signal

: This icon shows the strength of the remote controller signal. The icon will blink when an

interference is recognized during ight. When there are no additional warnings in DJI GO 4, it means

that the interference will not affect operation and overall ight experience.

9. HD Video Link Signal Strength

: This icon shows the strength of the HD video downlink connection between the aircraft and the

remote controller. The icon will blink when an interference is recognized during ight. When there are

no additional warnings in DJI GO 4, it means that the interference will not affect operation and overall

ight experience.

10. Battery Level

61%

: This icon shows the current battery level.

Tap to view the battery information menu, set the various battery warning thresholds, and view the

battery warning history.

. Focus/Metering Button

/ : Tap to switch between focus and metering mode. Tap to select object for focusing or

metering. Auto Focus-Continuous will be triggered automatically according to the status of the aircraft

and camera after enabling Auto Focus.