User Manual
28
©
2017 DJI All Rights Reserved.
Spark
User Manual
Using the Battery
Turning ON/OFF
Turning On: Press the Power button once, then press again and hold for two seconds to power on. The
remote controller system status screen will display the current battery level.
Turning Off: Press the Power button once, then press again and hold for two seconds to power off.
LED2
LED1
Battery Level Indicators
LED3
LED4
Power Button
Low Temperature Notice:
1. Battery capacity is signicantly reduced when ying in low temperature (0°C and 5°C) environments.
2. Batteries cannot be used in extremely low temperature (< 0°C) environments.
3. End the flight as soon as the DJI GO 4 app displays the “Low Battery Level Warning” in low
temperature environments.
4. To ensure optimal performance of the battery, keep the battery temperature above 20°C.
In cold environments, insert the battery into the battery compartment and turn on the aircraft
for approximately 1-2 minutes to warm up before taking o.
Checking Battery Level
The Battery Level Indicators display how much power remains. When the battery is turned off, press the
Power button once, the Battery Level Indicators will light up to display the current battery level. See below
for details.
The Battery Level Indicators will also show the current battery level during charging and
discharging. The indicators are dened below.
: LED is on.
: LED is ashing.
: LED is off.
LED1 LED2 LED3 LED4 Battery Level
88%~100%
75%~88%
63%~75%
50%~63%
38%~50%
25%~38%
13%~25%
0%~13%