User Manual
RONIN-SC
User Manual
20
© 2019 DJI OSMO All Rights Reserved.
It is recommended to set the overlap value to 30%.
The delay parameter is the interval time between shooting photos, and it should be set to one second more
than the shutter time to avoid blurred footage when using a long exposure.
After conrming the camera settings at the top of the screen, the panorama range can be set by dragging
the two white dots on the grid map. The total range covered by the endpoints and the shots required to
compose the panorama is displayed above the grid map. The slanted roll motor design allows users to
view the path of the panorama through the built-in display of the camera with little obstruction. The tilt axis
range in Panorama mode is ±45° to avoid capturing the gimbal in the shot while the pan axis allows you to
capture a full 360° rotation.
Tap the shutter button to start capturing the sequence.
Timelapse
In Timelapse mode, Ronin-SC triggers the camera to capture still images with your desired interval time
and will automatically stop when completed. The content duration for the Timelapse and the frame rate can
be set so that Ronin-SC can calculate the exact number of images required.
By enabling Push mode, users can manually adjust the pan and tilt axes before launching the Timelapse.
Users can push Ronin-SC to alter the camera orientation and adjust the framing. Tap the Virtual Joystick
icon to use the virtual joystick to adjust the camera orientation.
Motionlapse
Motionlapse allows you to set up to ve waypoints so that the camera moves during the Timelapse.