User Manual v1.0 2020.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this Manual 2 Legend 2 Before You Begin 2 Download the Ronin App 2 Contents 3 Introduction 4 DJI RS 2 Diagram Getting Started 5 6 Attaching the Extended Grip/Tripod 6 Mounting the Grip 6 Unlocking and Locking the Gimbal 7 Mounting the Camera 7 Balancing 9 BG30 Grip and Built-In Battery 12 Charging 12 Safety Guidelines 12 Operations 16 Activating DJI RS 2 16 Touchscreen 16 Ronin App Settings 20 Image Transmission 29 Operation Modes 30 Updating Firmware
Introduction DJI RS 2 is a professional single-handed 3-axis gimbal specifically designed for DSLR and mirrorless cameras. It is compatible with a wide range of camera setups and supports a tested payload of up to 4.5 kg. DJI RS 2 boasts enhanced gimbal performance thanks to its updated Titan Stabilization Algorithm. With a full-color touchscreen, users can calibrate the gimbal, set parameters, and choose from intelligent shooting modes such as ActiveTrack 3.0, Timelapse, Track, Panorama, and Time Tunnel.
DJI RS 2 User Manual DJI RS 2 Diagram 1 2 14 13 25 24 23 15 16 12 3 4 5 6 7 8 9 22 21 17 20 19 18 10 11 1. Tilt Lock 13. Lower Quick-Release Plate 2. Tilt Motor 14. Upper Quick-Release Plate 3. Pan Lock 15. Roll Motor 4. Pan Motor 16. Roll Lock 5. Touchscreen 17. Grip Lever/Safety Button 6. Ronin Series Accessories (RSA)/ NATO Ports 18. Battery Level Indicators 7. Power Button 20. Power Port (USB-C) 8. Camera Control Button 9. M Button 10.
Getting Started Attaching the Extended Grip/Tripod 1 2 3 Mounting the Grip Insert the grip into the gimbal as shown 1 . Make sure the grip lever is in the unlocked position 2 , and then toggle to the locked position after attaching 3 . To remove the grip, toggle the lever to the unlocked position, hold down the safety button, and pull the grip away from the gimbal. 2 1 6 © 2020 DJI OSMO All Rights Reserved.
DJI RS 2 User Manual Unlocking and Locking the Gimbal The gimbal is folded by default. To unfold the gimbal, toggle the tilt lock, roll lock, and pan lock levers to the unlocked position and adjust the gimbal position as shown, and then toggle the three locks to the locked position. Tilt Lock Roll Lock Pan Lock Mounting the Camera Supported Cameras and Lenses DJI RS 2 has been rigorously tested to support a payload of 4.5 kg.
DJI RS 2 User Manual A camera riser is required when using a focus motor or a small camera with a large lens, such as a Sony A6400 with the Sony FE 24-70 f2.8 GM lens. 2. Attach the Lower Quick-Release Plate and Lens-Fastening Strap Toggle the lever on the lower quick-release plate to the unlocked position 1 , then insert the camera 2 and toggle the lever to the locked position 3 after it is engaged.
DJI RS 2 User Manual To remove the lower quick-release plate, toggle the lever on the camera mounting plate to the unlocked position and remove the lower quick-release plate while pressing the safety lock on the mounting plate. RSS Camera Control Port Safety Lock 4. Connect the Camera Control Cable Choose the proper camera control cable according to the camera type. Plug one end of the cable into the camera and plug the other end into the RSS camera control port of the gimbal as shown above.
DJI RS 2 User Manual 1 2 2. Balancing Depth for the Tilt Axis a. Rotate the tilt axis so that the camera lens is pointing forward. Toggle the lever to the unlocked position 1 . b. Check to make sure the camera is not front or back-heavy. If front-heavy, move the camera backward by turning the knob 2 . If back-heavy, move the camera forward. c. Toggle the lever to the locked position. The tilt axis is balanced when the camera is steady while tilted up or down by 45°. d. Lock the tilt axis. 1 2 3 3.
DJI RS 2 User Manual 1 2 4. Balancing the Pan Axis a. Unlock the pan axis. Toggle the lever on the pan arm to the unlocked position 1 . b. While holding the grip, tilt DJI RS 2 forward, and rotate the pan arm until parallel with you. c. Check the movement of the pan axis. If the camera lens rotates to the left, push the pan axis to the right 2 . If the camera lens rotates to the right, push the pan axis to the left 2 . d. Toggle the lever on the pan arm to the locked position.
BG30 Grip and Built-In Battery The BG30 grip is for handheld use. The built-in battery within the grip has a capacity of 1950 mAh and the maximum runtime is 12 hours (when the DJI RS 2 is properly balanced). Charging Before using for the first time, charge the battery grip through the power port using a charging cable (included) and a USB adapter (not included). It is recommended to use a USB adapter with QC 2.0 and PD protocol (max. 24 W).
DJI RS 2 User Manual To avoid fire, serious injury, and property damage, observe the following safety guidelines when using, charging, or storing the grip. Grip Use 1. DO NOT allow the grip to come into contact with any kind of liquid. DO NOT leave the grip out in the rain or near a source of moisture. DO NOT drop the grip into water.
DJI RS 2 User Manual Grip Storage 1. Keep the grip out of the reach of children and animals. 2. If the grip will be stored for an extended period, charge the grip until the battery level reaches between 30% and 50%. 3. DO NOT leave the grip near heat sources such as a furnace or heater. DO NOT leave the grip inside of a vehicle on hot days. The ideal storage temperature is 22° to 28° C (72° to 82° F). 4. Keep the grip dry. Grip Maintenance 1.
DJI RS 2 User Manual 2. If the grip is stored for an extended period and the battery is depleted, the grip will enter sleep mode. Recharge the grip to exit sleep mode. 3. Remove the grip from the gimbal when stored for an extended period. Grip Maintenance 1. Battery life may be reduced if not used for an extended period. 2. Discharge and charge the grip completely once every three months to keep it in good condition. Grip Disposal 1.
Operations Activating DJI RS 2 DJI RS 2 needs to be activated through the Ronin app before using for the first time. 1. Press and hold the power button to power on the gimbal. 2. Enable Bluetooth on your mobile device and launch the Ronin app. Once detected in the list of Bluetooth devices, select DJI RS 2 and input the default Bluetooth password: 12345678. Make sure you are connected to the internet and follow the on-screen instructions to activate DJI RS 2.
DJI RS 2 User Manual Follow Mode: tap to select follow mode. The tilt motor controls the tilt axis to follow, pan motor controls the pan axis to follow, and roll motor controls the roll axis to follow. PF: pan follow, where only the pan axis follows the movement of the grip. PTF: pan and tilt follow, where both the pan and tilt axes follow the movement of the grip. FPV: pan, tilt and roll follow, where all three axes follow the movement of the grip.
DJI RS 2 User Manual Silent Mode Slide Left: System Settings Screen Slide left from the right edge of the screen to enter the system settings screen. Push Mode Disable Selfie Silent Mode: enable to turn off sounds including the warning tone. Push Mode: enable to manually control the tilt and pan axis. Disable Selfie: prevents accidentally entering selfie mode and interrupting recording. If disabled, Selfie mode will not be entered if the trigger is pressed three times.
DJI RS 2 User Manual The duration and stay time can be set on the waypoint settings screen after a waypoint is added and the position of the waypoint also can be reset. The duration indicates how much time it will take for the gimbal to travel from one waypoint to the next. The stay time indicates how long the gimbal will remain steady at the waypoint before moving to the next waypoint.
DJI RS 2 User Manual M Button Tap to select a user profile. Press and hold to enter Sport mode. Press and hold and press the trigger twice to remain in Sport mode. Repeat to exit Sport mode. Quickly tap twice to enter portrait mode. Press three times to enter or exit 3D Roll 360. When in 3D Roll 360, move the joystick left or right twice to automatically rotate the camera. Tap the trigger twice to stop continuous auto rotation. Press and hold the M button together with the trigger to begin auto tune.
DJI RS 2 User Manual Create Virtual Joystick 1 2 3 4 6 5 Use the virtual joystick in the app to control the movement of the gimbal and to shoot. 1. Control Bar: control the speed and smoothness of the gimbal by adjusting the control bar. Speed allows users to adjust the remote-controlled rotational speed. Smoothness allows users to adjust the sensitivity of the gimbal. The lower the smoothing value, the more sensitive the movement of the gimbal. 2.
DJI RS 2 User Manual Force Mobile Force Mobile requires the phone holder and a mobile phone mounted on a tripod or handlebar vertically. After enabling this feature in the Ronin app, the gimbal movement can be controlled by tilting and rotating your mobile phone. Speed determines the relationship between the rotational speed and angle. When the speed is set to 50, the angle of rotation for the gimbal and mobile phone is 1-to-1. The gimbal will move at an identical angle to the mobile phone.
DJI RS 2 User Manual Panorama Panorama allows users to capture a series of interconnecting still images with precise control based on the sensor type, lens focal length, overlap, and interval. Make sure you have connected the camera and gimbal using the corresponding camera control cable before using Panorama. Overlap: determines the overlap ratio of every photo when generating a panorama.
DJI RS 2 User Manual Timelapse In Timelapse, DJI RS 2 triggers the camera to capture still images with the set interval time and will automatically stop when completed. The duration for the Timelapse and the frame rate can be set so that DJI RS 2 can calculate the exact number of images required. By enabling Push mode, users can manually adjust the pan and tilt axes before starting the Timelapse. Users can push DJI RS 2 to alter the camera orientation and adjust the framing.
DJI RS 2 User Manual Track Track is designed to capture video with up to 10 waypoints. Users need to select the waypoint manually by moving the gimbal or using the virtual joystick. The duration parameter below the grid map indicates how much time it will take for the gimbal to travel from one waypoint to the next. The stay time indicates how long the gimbal will remain steady at the waypoint before moving to the next waypoint. DO NOT press the shutter button of the camera while using Track.
DJI RS 2 User Manual Gaming Controller PS4 DualShock and Xbox controllers can be used to control the gimbal and camera. After connecting the controller to the mobile device and gimbal, users can control gimbal movements, focus, and zoom, and can record videos, recenter gimbal, capture photos, and switch profiles. The speed and smoothness of the control sticks can be adjusted. Set the focus value within 10 on the camera settings for optimal performance. iOS 13 or higher, Android 9.
DJI RS 2 User Manual Motor Parameters Auto Tune: the stiffness value is determined by the payload of the gimbal. Use Auto Tune to obtain the stiffness value automatically after balancing. Tap Auto Tune and DJI RS 2 automatically calculates the result based on the weight of the gimbal setup. Alternatively, press and hold the M button and trigger simultaneously for four seconds to start auto tune without using the app. The auto tune process takes approximately 15 to 30 seconds.
DJI RS 2 User Manual User Profile Three user profiles can be set and save. Follow Mode: choose from Pan and Tilt Follow, FPV, Customized, and 3D Roll 360. Speed: determines how fast the camera travels while translating a pan, tilt, or roll movement. Deadband: determines how much movement the gimbal tolerates prior to translating the pan, tilt, and roll movement of the camera. Push: After enabling Push, the gimbal axis can be manually pushed to the desired position.
DJI RS 2 User Manual Endpoint: limits the rotational range of the gimbal by setting the endpoints. The pan axis has a slip-ring, enabling DJI RS 2 to rotate continuously when the endpoints are set to 180°. On the tilt axis, you can set up the endpoints according to your requirements. Some longer lenses may hit the gimbal frame. Set the endpoint angle to prevent such cases.
DJI RS 2 User Manual Using ActiveTrack 3.0 When tracking a person, it is recommended to select and confirm the person in the center of the camera view by pressing the trigger once. When tracking an object, it is recommended to select and confirm the object by dragging a box around it in order to recognize the object better. The gimbal begins to track after recognizing the object successfully. The appropriate speed should be set when using ActiveTrack.
DJI RS 2 User Manual Ronin app to enable or disable 3D Roll 360. Push the joystick to the left or right to begin 3D Roll 360. Push the joystick to the left or right twice in quick succession to trigger auto rotation. During auto rotation: when the grip is horizontal, press the trigger twice and the camera will stop in an upright position. Press the trigger three times and the camera will stop in an upside-down position.
Specifications External Device Working Performance Accessory Port RSA/NATO Ports 1/4"-20 UNC Screw Holes Cold Shoe Image Transmission/Focus Motor Port (USB-C) Focus Motor Port (USB-C) RSS Camera Control Port (USB-C) Input Power Model: BG30-1950mAh-15.4V Type: LiPo 4S Capacity: 1950 mAh Energy: 30.03 Wh Voltage: 12-17.6 V Max. Runtime: Approx. 12 h Charging Time: Approx. 1.5 h (when using 24 W USB Charger) Charging Temperature Range: 5° to 40° C (41° to 104° F) USB Input: 5V/2A, 9V/2A, 12V/2A, 15V/1.
This content is subject to change. Download the latest version from http://www.dji.com/rs-2 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. RONIN is a trademark of DJI OSMO. Copyright © 2020 DJI OSMO All Rights Reserved.
Quick Start Guide v1.
DJI RS 2 Quick Start Guide DJI RS 2 Overview EN 1 2 14 13 25 24 23 15 16 12 8 3 4 5 6 7 9 22 21 17 20 19 18 10 11 1. Tilt Lock 13. Lower Quick-Release Plate 2. Tilt Motor 14. Upper Quick-Release Plate 3. Pan Lock 15. Roll Motor 4. Pan Motor 16. Roll Lock 5. Touchscreen 17. Grip Lever/Release Button 6. Ronin Series Accessories (RSA)/ NATO Ports 18. Battery Level Indicators 7. Power Button 20. Power Port (USB-C) 8. Camera Control Button 9. M Button 10.
DJI RS 2 Quick Start Guide Getting Started Ronin App EN A. Downloading the DJI RONINTM App and Watching the Tutorials Tutorials B. Charging the Battery and Checking the Battery Level Before using for the first time, charge the battery grip through the power port using a charging cable (included) and a USB adapter (not included). It is recommended to use a USB adapter with QC 2.0 and PD protocol (max. 24 W). During charging and usage, the battery level indicators indicate the battery level.
DJI RS 2 Quick Start Guide D. Mounting the Grip EN Insert the grip into the gimbal as shown 1 . Make sure the grip lever is in the unlocked position 2 , and then toggle to the locked position after attaching 3 . To remove the grip, toggle the lever to the unlocked position, hold down the release button, and pull the grip away from the gimbal. 2 3 1 The gimbal is folded by default.
DJI RS 2 Quick Start Guide E. Powering On/Off and Entering/Exiting Sleep Mode F. Activating DJI RS 2 DJI RS 2 needs to be activated through the Ronin app before using for the first time. 1. Press and hold the power button to power on the gimbal. 2. Enable Bluetooth on your mobile device and launch the Ronin app. Note that a DJI account is required to launch the Ronin app. Once detected in the list of Bluetooth devices, select DJI RS 2 and input the default Bluetooth password: 12345678.
DJI RS 2 Quick Start Guide 2. Attach the Lower Quick-Release Plate and Lens-Fastening Strap EN Toggle the lever on the lower quick-release plate to the unlocked position 1 , then insert the camera 2 and toggle the lever to the locked position 3 after it is engaged. Attach the lens-fastening strap to the lower quick-release plate 4 , and bind the strap to the camera lens 5 . Note that the rubber of the lens-fastening strap must be directly under the lens.
DJI RS 2 Quick Start Guide RSS Camera Control Port Safety Lock 4. Connect the Camera Control Cable Choose the proper camera control cable according to the camera type. Plug one end of the cable into the RSS camera control port of the gimbal (shown above) and plug the other end into the camera. Balancing Balancing is required before shooting. Before balancing, make sure to power on the camera if using an optical zoom lens and to select the focal length if using a varifocal lens.
DJI RS 2 Quick Start Guide 2. Balancing Depth for the Tilt Axis EN a. Rotate the tilt axis so that the camera lens is pointing forward. Toggle the lever to the unlocked position 1 . b. Check to make sure the camera is not front or back-heavy. If front-heavy, move the camera backward by turning the knob 2 . If back-heavy, move the camera forward. c. Toggle the lever to the locked position. The tilt axis is balanced when the camera is steady while tilted up or down by 45°. d. Lock the tilt axis. 1 2 3 3.
DJI RS 2 Quick Start Guide 4. Balancing the Pan Axis EN a. Unlock the pan axis. Toggle the lever on the pan arm to the unlocked position 1 . b. While holding the grip, tilt DJI RS 2 forward, and rotate the pan arm until parallel with you. c. Check the movement of the pan axis. If the camera lens rotates to the left, push the pan axis to the right 2 . If the camera lens rotates to the right, push the pan axis to the left 2 . d. Toggle the lever on the pan arm to the locked position.
DJI RS 2 Quick Start Guide Operation EN After balancing, make sure the three axes are unlocked before powering on DJI RS 2. Touchscreen 100 PTF Fast Home Auto-Tune: after balancing, DJI RS 2 must be auto-tuned before it can be used. Tap the icon to enter auto-tune page. If the lens-fastening strap is installed, you can enable SuperSmooth prior to auto-tune for the best performance. Balance Status: tap to check the balance status. Follow Mode: tap to select follow mode.
DJI RS 2 Quick Start Guide Button Functions Press and hold to power on or off. Tap to lock or unlock the touchscreen. Battery Level Button EN Power Button Press once to check battery level. Press twice to enter or exit sleep mode. Trigger Front Dial* Camera Control Button* Joystick Tap once to start ActiveTrack (requires the Image Transmission System to be enabled). Press and hold to enter Lock mode. Tap twice to re-center the gimbal.
DJI RS 2 Quick Start Guide Specifications EN Weight Gimbal: Approx. 960 g (2.12 lbs) (excluding the QuickRelease Plates and Camera Mounting Plate) Camera Mounting Plate: Approx. 150 g (0.33 lbs) BG30 Grip: Approx. 265 g (0.58 lbs) Extended Grip/Tripod: Approx. 226 g (0.50 lbs) Upper and Lower Quick-Release Plates: Approx. 105 g (0.23 lbs) Dimensions Gimbal (folded): 260×265×70 mm (excl. grip) Gimbal (unfolded): 410×260×195 mm (incl. grip, excl.
DJI Support DJI 技术支持 DJI技術支援 Dukungan DJI DJI サポート DJI 고객지원 Sokongan DJI ฝ่่ายสนัั บสนุุ นของ DJI Поддръжка на DJI Podpora společnosti DJI DJI Support DJI Support Asistencia técnica de DJI Υποστήριξη της DJI DJI-tuki Service client DJI DJI Podrška DJI támogatás Assistenza DJI DJI-ondersteuning DJI-støtte Wsparcie DJI Assistência da DJI Suporte DJI Asistență DJI Техническая поддержка DJI DJI-support DJI Support DJI دعم http://www.dji.
DISCLAIMER AND SAFETY GUIDELINES 免责声明和安全操作指引 免責聲明與安全指導方針 免責事項と安全に関するガイドライン 고지 사항 및 안전 가이드 HAFTUNGSAUSSCHLUSS UND SICHERHEITSVORSCHRIFTEN RENUNCIA DE RESPONSABILIDAD Y DIRECTRICES DE SEGURIDAD CLAUSE D'EXCLUSION DE RESPONSABILITÉ ET CONSIGNES DE SÉCURITÉ LIMITAZIONI DI RESPONSABILITÀ E DIRETTIVE SULLA SICUREZZA DISCLAIMER EN VEILIGHEIDSRICHTLIJNEN DECLARAÇÃO DE EXONERAÇÃO DE RESPONSABILIDADE E DIRETRIZES DE SEGURANÇA DECLARAÇÃO DE EXONERAÇÃO DE RESPONSABILIDADE E DIRETRIZES DE SEGURANÇA ЗАЯВЛЕНИЕ ОБ ОТКАЗЕ О
EN Disclaimer and Warning Congratulations on purchasing your new DJI OSMOTM product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, or damage to your DJI OSMO product or damage to other objects in the vicinity.
Download Ronin App Download and install the Ronin app. Search “Ronin” on the App Store and then follow instructions for iOS installation. Search “Ronin” on Google Play and then follow instructions for Android installation. * Ronin app supports iOS 11.0 (or later) or Android 7.0 (or later). Safety Guidelines 1. DJI RS 2 is powered by a built-in battery through the grip. Read the warnings and safety guidelines about the grip in the DJI RS 2 User Manual before use.
DJI Support DJI 技术支持 DJI 技術支援 DJI サポート DJI 고객지원 DJI Support Servicio de asistencia de DJI Service client DJI Assistenza DJI DJI-ondersteuning Assistência da DJI Suporte DJI Техническая поддержка DJI www.dji.com/support If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. 如果您对说明书有任何疑问或建议，请通过以下 电子邮箱联系我们：DocSupport@dji.com。 Printed in China.
GHIÿKLMIM >?@ABÿD?E?F 5678ÿ 7 ÿ 7 7 !6" #7$ ! %"ÿ7#ÿ6 "8& 7ÿ7ÿ#'$#6"$7 8 "ÿ7##'$7 $7 7(8 )6"" * +, ! -" "#ÿ&ÿ$#," &8 "ÿ&ÿ6 .
pqÿ |}~ |}ÿ p p~ £ s q ©x ª stÿuvwÿxyzÿ{ ÿ{ ÿ{ ÿ{ ÿÿ{ wwtÿ{ |ytuwtyÿwÿw¡¢wÿ{ |ytuwtÿwÿ¤w¡wÿ{ |ytuwtuyÿwÿ¥ytw¦ytwÿ{ stÿwÿyy§ÿ{ st¥¨yÿtÿw¡wÿ{ st¥¨yÿtÿw¡wÿ{ «¬®¯°±²ÿ®¬´²µ¶±·ÿ̧ X; Z2)6"ÿ5282% [\]^_ `ab Z2)6"cded fghÿij Z2k6"ÿ:282% Z2)6"ÿ5282% 5286%ÿZ2)6" Z2)6"ÿ5282% Z2)6"ÿ5282% Z2)6"ÿ:282% Z2)6"ÿ5282% 5282%ÿ3 ÿ!2)2 l2,2.ÿm24no7.
êë êë ÊGÿË FÿAF ÌÍÎÏ ÐÑÒÓ ÊGÿÔWÿÕÖ×]Ø {ÙÚÿr~ÿÚÛÜ ÊG£FF Fÿ ÿÊG AÿÝF ÿÊG Dÿ ÊGÿÞßF ÞFÿÿF ÿGÿ ÊG Êÿ ÿF ÿ ÿGG à°Á°±áÿÅÂÆÿ⯳ã²Ãäÿ ®Âáå²ÿÅÂÆÿµ¶·ÿæ¿çèé ÿ Fÿíïñ íïñ íïñ !"Õ\#ÿíïñ $%ÿ&'ÿíïñ A ÿíïñ ¥ÿ Gÿíïñ D¢ÿ Gÿíïñ D¥ÿGÿíïñ >ÿíïñ D¥ÿ ¥ÿíïñ D¥ÿ ¥ÿíïñ (°´Ãªä©²±±È ÿ®Â)ãÿ ÁÁ êë ìD FÿDGFGÿDÿ íîADÿï
12 34567849 ÿ8 ÿ 8 4 ÿ ÿ ÿ ÿ !"ÿ#$%ÿ&'(&)(ÿ * +ÿ, ! !ÿ ! *ÿ ÿ! !ÿ * -! ÿ *ÿ ÿ .!ÿ *ÿ ". ÿ ! ÿ#$%ÿ&'(&ÿ / *!*ÿ !. ÿ0!. !ÿ !+ÿ 1 !ÿ ÿ ! *ÿ *ÿ. "ÿ ÿ *ÿ" ÿ- ÿ ! ÿ ÿ ! ÿ 2 ÿ ÿ ! .ÿ ÿ ! 3ÿ* - !ÿ ÿ ÿ#$%ÿ&'(&ÿ * 3ÿ ÿ* - !ÿ ÿ ! ÿ 02! ÿ ÿ !ÿ/ +ÿ4 ÿ ÿ ÿ * 3ÿ ÿ ! !0ÿ .ÿ ÿ ÿ /!ÿ ! *ÿ ÿ* -! ÿ !.
24ÿ67789 ÿ7 ÿ23 ÿ ÿ7 ÿ7 ÿ ÿ 7ÿ8 ÿ87789 ÿ7 ÿ ÿ 7ÿ7 ÿ7 ÿ ÿ 8 8ÿ ÿ ÿ ÿ ÿ 9 8 ÿ 874 8 8ÿ 12 *+,-.//.
12 ÿ$ 3 5 ÿ! ÿ=#3 $#ÿ6$ 3ÿ! ÿ ) $ÿ4(%=@A$ # ÿ& # 'ÿ "" ÿ! ÿ 5 $ÿ ÿ! ÿ ( =@ *ÿ& %% ÿ# *ÿ$ 3 5 ÿ! ÿ=#3 $#ÿ)!% ÿ&$ % "ÿ! ÿ #6 Bÿ =@ÿ+ %* ÿ! ÿ 5 $:ÿ C:ÿD6ÿ! ÿ=#3 $#ÿ* ÿ ÿ!#5 ÿ#ÿ ÿ6 =( ÿ$% "ÿ)%!ÿ#ÿE:F3ÿ" #$'ÿ# #=!ÿ! ÿ&$ 5%* *ÿ " #$ÿ $%&ÿ ÿ! ÿ=#3 $#ÿ ÿ ÿ( ÿ! ÿ6 =( ÿ3 $: #:ÿG#@ ÿ ($ ÿ! ÿ !ÿ 6ÿ! ÿ" #$ÿ $%&ÿ#$ ÿ6#=% "ÿ ()#$*:ÿH% ÿ(&ÿ! ÿ" #$ÿ $%&ÿ ÿ ! ÿ6 =( ÿ$% "ÿ $ÿ! ÿI 3ÿ$% "ÿ ÿ! ÿ ÿ# *ÿ&( ÿ%ÿ#(: +:ÿJ$ ÿ! ÿ" #$ÿ $%&ÿ% ÿ! ÿ+ ÿ! * $ÿ)!% ÿ! *% "ÿ%ÿ%"! B:ÿG#@ ÿ ($ ÿ! ÿ" #$ÿ
12 3455678945 ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ !ÿ"# $ÿ ÿ ÿ ÿ% ÿ ÿ ÿ ÿ&'ÿ( ÿ)ÿ% ÿ ÿ* ÿ $+ &'ÿ( ÿ)ÿ ÿ ** ÿ)ÿ ÿ, ÿ- ÿ ÿ- +ÿ ÿ ÿ !ÿ ÿ% ÿ ÿ ÿ .ÿ ÿ% ÿ ÿ ÿ ÿ ÿ ÿ / ÿ 0% ÿ ÿ * ÿ $!ÿ ÿ ÿ% ÿ ÿ ÿ .ÿ ÿ% ÿ1 ÿ ÿ ÿ ÿ ÿ % ÿ ÿ* ÿ $+ %ÿ ÿ% ÿ ÿ ÿ ÿ ÿ ÿ / ÿ 0% ÿ ÿ* ÿ $!ÿ ÿ( ÿ( 2 3. ÿ / ÿ4 ÿ .
12 V%-"*%WW!XÿYZÿ+%-[-ÿ$%&'(ÿ\]!!W M ÿ54 4 ÿ ÿ ÿ 4567ÿ ÿ7 5 ÿ ÿS ÿ36 5 4 7ÿ 7ÿ ÿ34567 ÿM^Q ÿ G 6 ÿ4 ÿF4ÿG_ 7 ÿSQÿTQUÿ7 5 ÿ 7ÿ34567ÿ 4 4 ÿ9 ÿ54 5 ÿ 4 ÿ ÿ 4567ÿ 4 4 ÿ5 ÿ ÿ54 4 ÿ ÿ ÿ 4567ÿ ÿF ÿ 4ÿ ÿF4 ÿ34567ÿ9 ÿ 4 65 ÿM 4 4 ÿ 4 ÿ 4 ÿ 7 V,W[Y*,"[%U ÿ 4567ÿ 4 4 ÿ5 ÿ ÿ67 ÿ 4 ÿ5 4 ÿ 6 ÿ ÿ ÿ ÿ ÿ 4567ÿ ÿ 5 ÿ 4 ÿ ÿ 4 4 ÿ ÿ ÿ ÿG ÿ5 4 ÿ ÿ 4567ÿ ÿ ÿ ÿ ÿ 4ÿ 6 ÿ 4 ÿ ÿ 4 4 L ÿ 45 6 ` ÿa 77ÿ ÿ ÿ 5 5 ÿ
12 345ÿ78987ÿ 98 ÿ ÿ845ÿ 7ÿ 455 ÿ 9857ÿ845ÿ 9 98 ÿ78987 ÿ ! " #$! % & # ' ÿ(5 ) 7ÿ* 8 ÿ7ÿ 5 85 +ÿ 8ÿ 8ÿ 9 985 , -7ÿ(5 ÿ7 ( .9 98/ ' ÿ/ 55 ) 7ÿ* 8 ÿ7ÿ 5 85 ÿ9 ÿ 9 985 , -7ÿ/ 55ÿ7 ( 0 8ÿ1ÿ7ÿ758 , -7ÿ/ 55ÿ8 5 0 87ÿ1ÿ9 ÿ,ÿ9 5ÿ758 ) 7ÿ* 8 ÿ'8987ÿ2 98 ÿ357 48 7 ÿ ! " #$! % & # , -7ÿ 5 ÿ8 5 56789ÿ;6<6=ÿ>==6=?ÿ8@AB<>ÿC=DEB=> , -7ÿ 5 ÿ7 ( ) 7ÿ* 8 ÿ7ÿ7 5 85 , -7ÿ 5 ÿF - ( ) 7ÿ* 8 ÿ497ÿ789 5 ' ÿ/ 55 .
233ÿ356789 1-.Z-6X/NPN@ÿ1-Xÿ-3ÿ6@t2/3/5-3ÿ@33@.1/P/3ÿ@ÿ-256P3ÿ N /3Y-3/¢£@3ÿ6@B@MP.5@3ÿNPÿ)/6@5/MPÿHIJIF ÿ ÿ ÿ !ÿ ¤/35@ÿ2XPÿ1Y/PÿNPÿ)@1BP6P¢¥-ÿN@ÿ1-.Z-6X/NPN@ÿ "#5$%&ÿ 6 'ÿ)*+ÿ,-./.ÿ0-123ÿ4-5-6 NPÿÿN/3Y-.¦M@Bÿ-.B/.@ÿ@XÿVVVFNW/F1-X@26- 75$ 8ÿ8%69 #'ÿ,:;04ÿ 1-XYB/P.1@ < =75 =98ÿ" #&>'ÿ)*+ÿ?@1A.-B-CDEÿ+.1Fÿ < =75 =998ÿ" #&>ÿG$$#=='ÿHIJÿ:FÿK/15-6DÿLBMNFEÿ .N@6@¢-ÿN@ÿ1-.5P15-ÿ.Pÿ'ÿ)*+ÿXOEÿ +.N2356/@356P33@ÿJHEÿSJEÿ/@N@6BP2@6Eÿ@6XP.D L26OP.
ÿ " 14 ÿ#$%& ÿ#'%( ÿ)*+, ÿ-./0 ÿ " 14 51!212 ÿ65ÿ 2 45312ÿ65ÿ 51!215ÿ12534ÿ 2 4532ÿ 3 3651 45"323 " 145ÿ 2 44312ÿ6 ÿ 56789:6;<=>ÿ@ABB6CD<=ÿEFG HIIJKLLMMMNOPQNRSTLUVJJSWI `ab`cdebfÿhidÿjidfÿekhidjlmeik no pqrstuvwxsyz {|}~} ÿ2 ÿÿ4165 1 ÿ ÿ ÿ ÿ 8 12 94ÿ ÿ ÿ ÿ ÿ ÿ2 94 ÿ5 51!56 0123456ÿ23ÿ8923 X8YZ [\]^ _
DJI RONIN RavenEye Image Transmission System User Guide v1.0 2020.
In the Box Image Transmitter × 1 Cold Shoe to 1/4” Screw Adapter ×1 USB-C to USB-C Cable (20cm) × 1 Mini-HDMI to HDMI Cable (20cm) × 1 Mini-HDMI to Mini-HDMI Cable (20cm) × 1 Mini-HDMI to Micro-HDMI Cable M4 Screw (10mm) × 2 (20cm) × 1 USB-C Cable (40cm) × 1 Allen Wrench (3mm) × 1 Introduction DJI RONINTM RavenEye Image Transmission System is used to transmit a wireless video signal so that users can access the camera view remotely.
6. Power Button Press and hold to power on or off. Press six times to reset the default Wi-Fi password to 12345678 (the battery level indicators will blink three times when the password is successfully reset. A new password must be set in the Ronin app). Press and hold for 10 seconds to force shutdown. 7. Cold Shoe For connecting to the gimbal or camera. 8. Power/Communication Port (USB-C) For charging and communicating with DJI RS 2 and RSC 2. 9. Reserved LED Reserved LED currently without a function.
Method 2: use RavenEye with Ronin-S or Ronin-SC (Ronin-S is used as an example below) 1. Attach the image transmitter to the camera. 2. Connect the HDMI port of the image transmitter to the HDMI port of the camera using the provided HDMI cable according to the camera model. 3. Connect the shutter control port of the camera to the RSS camera control port of the image transmitter or to the RSS camera control port of the gimbal.
Method 3: use RavenEye with only the camera 1. Attach the image transmitter to the camera. 2. Connect the HDMI port of the image transmitter to the HDMI port of the camera using the provided HDMI cable according to the camera model. 3. Connect the shutter control port of the camera to the RSS camera control port of the image transmitter. Connect the mobile device and the image transmitter via Wi-Fi. You can use the mobile device to control the camera and access the camera view.
1 2 100 DJI RS 2 Creat 3 9 4 02:30 8 User Profile Status F 2.8 1/800 7 5 800 6 1. Battery Level Display 100 : indicates the battery level of the image transmitter. 2. System Settings : tap to set the parameters. RavenEye Assistant: tap to enable the display of RavenEye Assistant. Guide Frame: tap to choose from 3 x 3, 6 x 4, or Golden Ratio. Aspect Marker: tap to choose from 2.35:1, 1.82:1, 16:9, 9:16, or 4:3.
overexposure. False Color: helps to identify underexposure and overexposure. Blue indicates underexposure. Red indicates overexposure. Focus Peak: the edge of the focus area displays red. LUT: users can import a LUT file to the UserLut folder of the Ronin app (iOS) or the Ronin/UserLut folder in the root directory of the mobile phone (Android) to add a filter. Single Color: tap to check the RGB and view the quality of the exposure according to the noise of the video. 7. Camera Settings F 2.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator,Inc. RONIN is a trademark of DJI OSMO. Copyright © 2020 DJI OSMO All Rights Reserved.
c/JIR ABCDEÿGCHIEJ 5678ÿ 7 ÿ ! "7 7# #$6%#&7'#$ (%ÿ7&ÿ6 %8) 7ÿ7ÿ&*'&6%'7 8 %ÿ7&&*'7#'7 7+8 ,6%%#- .
12 D 34567849 ÿ8 ÿ 8 4 ÿ ÿ ÿ ÿ !"ÿ#$%ÿ&'(&)(ÿ * +ÿ , ! !ÿ ! *ÿ ÿ! !ÿ* -! ÿ *ÿ ÿ .!ÿ *ÿ ". ÿ ! ÿ #$%ÿ&'(&ÿ / *!*ÿ !. ÿ0!. !ÿ !+ÿ1 !ÿ ÿ ! *ÿ *ÿ . "ÿ ÿ *ÿ" ÿ- ÿ ! ÿ ÿ ! ÿ 2 ÿ ÿ ! .ÿ ÿ ! 3ÿ* - !ÿ ÿ ÿ#$%ÿ&'(&ÿ * 3ÿ ÿ* - !ÿ ÿ ! ÿ 02! ÿ ÿ !ÿ/ +ÿ4 ÿ ÿ ÿ * 3ÿ ÿ ! !0 ÿ .ÿ ÿ ÿ /!ÿ ! *ÿ ÿ* -! ÿ !.
12ÿ456785ÿ95ÿ 5ÿ ÿ95ÿ 8 6 59ÿ ÿ95ÿ 5ÿ 58ÿ ÿ 5ÿ 9ÿ 5 9ÿ8ÿ8 9ÿ9ÿ 7 92 2ÿ 99 6 ÿ ÿ6 58 ÿ9ÿ ÿ 4ÿ1 ÿ7 5ÿ95ÿ6 885 ÿ ÿ ! ÿ6 5ÿ9ÿ6 569ÿ95ÿ6 58 ÿ" 9ÿ95ÿ #5 $%5ÿ 5ÿ &8 ÿ4% 95 ÿ ÿ 98ÿ# ÿ95ÿ 5ÿ98 ÿ 958 65ÿ ÿ95ÿ ÿ 2 ÿ& 5ÿ 5ÿ 58ÿ6 ÿ 5ÿ89 95 ÿ '()2 * 5 ÿ7 ÿ95ÿ 5ÿ 58 ÿ # ÿ85 ÿ 799 ÿ ÿ •ÿ 95ÿ 5ÿ %ÿ 9 52 +,-./0ÿ02ÿ3.
V Æ Úÿ́ àÿ ¹ ¸ ÿ ¹ · ÿ! ¹"#!ÿ! ÿƹà·àÿ$ ÿ́ ! ÿ$ ·"µ ÿ¹%ÿ ÿ Æ ÿËÿ̧$àÿ ÿ$µ¶"& µÿ 'ÿ ¹$·à#ÿ! ÿ !¹à ´ 123 D 456789 ÿ ÿ ÿ !"# $%&' ()*+,-.#/0 1 ÿ 23456789: ;<=>?@&ABCDEF GHI5JKLMN&OP# QRSHIT UV!"# &WXY Z[()*+#/\& ]^_`CGab#/\0# 67cd/\59efgGh i jklmnopq5!"# jkr!"# s0 CDKL5tuv9ewx 1 ÿ 2rnyaQ za!"# {|}5OP_MNs0x~wxvw 70Rd5 #/ m5 _ &YR65Q # 0Y 67 [C&sx~ ¡ ¢£¤¥ #/\0# 67cd5/\¦§^¨© 1 ÿ 267 ª7«&¬®¯
01234567268ÿ ÿ ÿ 616 ÿ27 61 6 ÿ0616 2ÿ 2 4 1 5672 ÿ012345672ÿ!"## ÿ $404372 63%7&'ÿ27 418 (2'ÿ4ÿ &7)(22ÿ ÿ ÿ 84574ÿ7 2ÿ*ÿ+&)4*4 *6ÿ043% 4* 63 ÿ,-.ÿ!/ÿ0ÿ232ÿ +&)4*4 *6ÿ043% 4* 63ÿ,-.ÿ!/1ÿ0 2 6 %ÿ)ÿ 02 )&ÿ04 6152* 6834ÿ84 23%734ÿ Lt.
